Compare commits

6 Commits
35 changed files with 64429 additions and 3950 deletions

No files matched your search

+1
View File
@@ -7,3 +7,4 @@
.vscode/ipch .vscode/ipch
compile_commands.json compile_commands.json
src/secrets.h src/secrets.h
build
+5 -3
View File
@@ -1,9 +1,11 @@
{ {
// See http://go.microsoft.com/fwlink/?LinkId=827846
// for the documentation about the extensions.json format
"recommendations": [ "recommendations": [
"Jason2866.esp-decoder", "platformio.platformio-ide"
"pioarduino.pioarduino-ide"
], ],
"unwantedRecommendations": [ "unwantedRecommendations": [
"ms-vscode.cpptools-extension-pack" "ms-vscode.cpptools-extension-pack",
"pioarduino.pioarduino-ide"
] ]
} }
+3
View File
@@ -0,0 +1,3 @@
{
"cmake.ignoreCMakeListsMissing": true
}
-3
View File
@@ -1,3 +0,0 @@
cmake_minimum_required(VERSION 3.16.0)
include($ENV{IDF_PATH}/tools/cmake/project.cmake)
project(eInk_F1)
+17
View File
@@ -0,0 +1,17 @@
# E-Ink F1 Display
## Raspberry Pi Pico W (Arduino)
This project targets the Raspberry Pi Pico W using the Arduino-Pico core
through PlatformIO and the Waveshare 4.2-inch V2 display. The display GPIO
assignments are in `include/config.h`.
1. Copy `src/secrets.h.example` to `src/secrets.h` and set your Wi-Fi SSID and
password. The actual `src/secrets.h` is ignored by Git. It also contains
the public root certificate used to verify OpenF1's HTTPS connection.
2. Build with `pio run -e pico_w`.
3. Upload with `pio run -e pico_w -t upload`.
4. Open the serial monitor with `pio device monitor -e pico_w`.
The display uses GPIO 8 (DC), GPIO 9 (CS), GPIO 10 (SCK), GPIO 11 (MOSI),
GPIO 12 (RST), and GPIO 13 (BUSY).
+14
View File
@@ -0,0 +1,14 @@
// Pico W GPIO assignments for the Waveshare 4.2-inch V2 display.
#define EPD_RST_GPIO 12
#define EPD_BUSY_GPIO 13
#define EPD_DC_GPIO 8
#define EPD_CS_GPIO 9
#define EPD_MOSI_GPIO 11
#define EPD_CLK_GPIO 10
#define DEVICE_HOSTNAME "F1_Dashboard"
#define TIMEZONE "CST6CDT,M3.2.0/2:00:00,M11.1.0/2:00:00"
// Display resolution
#define EPD_4IN2B_V2_WIDTH 400
#define EPD_4IN2B_V2_HEIGHT 300
-32
View File
@@ -1,32 +0,0 @@
#ifndef wifi_h
#define wifi_h
/* WiFi station Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
#include <string.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "freertos/event_groups.h"
#include "esp_system.h"
#include "esp_wifi.h"
#include "esp_event.h"
#include "esp_log.h"
#include "nvs_flash.h"
#include "lwip/err.h"
#include "lwip/sys.h"
static void event_handler(void* arg, esp_event_base_t event_base,
int32_t event_id, void* event_data);
void wifi_init_sta(void);
#endif
+200
View File
@@ -0,0 +1,200 @@
/*****************************************************************************
* | File : DEV_Config.c
* | Author : Waveshare team
* | Function : Hardware underlying interface
* | Info :
*----------------
* | This version: V3.0
* | Date : 2019-07-31
* | Info :
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of theex Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "config.h"
#include "DEV_Config.h"
#define SPI_PORT spi1
/**
* GPIO
**/
int EPD_RST_PIN;
int EPD_DC_PIN;
int EPD_CS_PIN;
int EPD_BUSY_PIN;
int EPD_CLK_PIN;
int EPD_MOSI_PIN;
/**
* GPIO read and write
**/
void DEV_Digital_Write(UWORD Pin, UBYTE Value)
{
gpio_put(Pin, Value);
}
UBYTE DEV_Digital_Read(UWORD Pin)
{
return gpio_get(Pin);
}
/**
* SPI
**/
void DEV_SPI_WriteByte(uint8_t Value)
{
spi_write_blocking(SPI_PORT, &Value, 1);
}
void DEV_SPI_Write_nByte(uint8_t *pData, uint32_t Len)
{
spi_write_blocking(SPI_PORT, pData, Len);
}
/**
* GPIO Mode
**/
void DEV_GPIO_Mode(UWORD Pin, UWORD Mode)
{
gpio_init(Pin);
if(Mode == 0 || Mode == GPIO_IN) {
gpio_set_dir(Pin, GPIO_IN);
} else {
gpio_set_dir(Pin, GPIO_OUT);
}
}
/**
* delay x ms
**/
void DEV_Delay_ms(UDOUBLE xms)
{
sleep_ms(xms);
}
void DEV_GPIO_Init(void)
{
EPD_RST_PIN = EPD_RST_GPIO;
EPD_DC_PIN = EPD_DC_GPIO;
EPD_BUSY_PIN = EPD_BUSY_GPIO;
EPD_CS_PIN = EPD_CS_GPIO;
EPD_CLK_PIN = EPD_CLK_GPIO;
EPD_MOSI_PIN = EPD_MOSI_GPIO;
DEV_GPIO_Mode(EPD_RST_PIN, 1);
DEV_GPIO_Mode(EPD_DC_PIN, 1);
DEV_GPIO_Mode(EPD_CS_PIN, 1);
DEV_GPIO_Mode(EPD_BUSY_PIN, 0);
DEV_Digital_Write(EPD_CS_PIN, 1);
}
/******************************************************************************
function: Module Initialize, the library and initialize the pins, SPI protocol
parameter:
Info:
******************************************************************************/
UBYTE DEV_Module_Init(void)
{
// GPIO Config
DEV_GPIO_Init();
spi_init(SPI_PORT, 4000 * 1000);
gpio_set_function(EPD_CLK_PIN, GPIO_FUNC_SPI);
gpio_set_function(EPD_MOSI_PIN, GPIO_FUNC_SPI);
printf("DEV_Module_Init OK \r\n");
return 0;
}
void DEV_GPIO_Init_1(void)
{
spi_deinit(SPI_PORT);
gpio_set_function(EPD_CLK_PIN, GPIO_FUNC_SPI);
gpio_set_function(EPD_MOSI_PIN, GPIO_FUNC_SPI);
}
void DEV_SPI_Init(void)
{
spi_init(SPI_PORT, 4000 * 1000);
gpio_set_function(EPD_CLK_PIN, GPIO_FUNC_SPI);
gpio_set_function(EPD_MOSI_PIN, GPIO_FUNC_SPI);
}
void DEV_SPI_SendData(UBYTE Reg)
{
UBYTE i,j=Reg;
DEV_GPIO_Mode(EPD_MOSI_PIN, 1);
DEV_GPIO_Mode(EPD_CLK_PIN, 1);
DEV_Digital_Write(EPD_CS_PIN, 0);
for(i = 0; i<8; i++)
{
DEV_Digital_Write(EPD_CLK_PIN, 0);
if (j & 0x80)
{
DEV_Digital_Write(EPD_MOSI_PIN, 1);
}
else
{
DEV_Digital_Write(EPD_MOSI_PIN, 0);
}
DEV_Digital_Write(EPD_CLK_PIN, 1);
j = j << 1;
}
DEV_Digital_Write(EPD_CLK_PIN, 0);
DEV_Digital_Write(EPD_CS_PIN, 1);
}
UBYTE DEV_SPI_ReadData(void)
{
UBYTE i,j=0xff;
DEV_GPIO_Mode(EPD_MOSI_PIN, 0);
DEV_GPIO_Mode(EPD_CLK_PIN, 1);
DEV_Digital_Write(EPD_CS_PIN, 0);
for(i = 0; i<8; i++)
{
DEV_Digital_Write(EPD_CLK_PIN, 0);
j = j << 1;
if (DEV_Digital_Read(EPD_MOSI_PIN))
{
j = j | 0x01;
}
else
{
j= j & 0xfe;
}
DEV_Digital_Write(EPD_CLK_PIN, 1);
}
DEV_Digital_Write(EPD_CLK_PIN, 0);
DEV_Digital_Write(EPD_CS_PIN, 1);
return j;
}
/******************************************************************************
function: Module exits, closes SPI and BCM2835 library
parameter:
Info:
******************************************************************************/
void DEV_Module_Exit(void)
{
}
+88
View File
@@ -0,0 +1,88 @@
/*****************************************************************************
* | File : DEV_Config.h
* | Author : Waveshare team
* | Function : Hardware underlying interface
* | Info :
* Used to shield the underlying layers of each master
* and enhance portability
*----------------
* | This version: V2.0
* | Date : 2018-10-30
* | Info :
* 1.add:
* UBYTE\UWORD\UDOUBLE
* 2.Change:
* EPD_RST -> EPD_RST_PIN
* EPD_DC -> EPD_DC_PIN
* EPD_CS -> EPD_CS_PIN
* EPD_BUSY -> EPD_BUSY_PIN
* 3.Remote:
* EPD_RST_1\EPD_RST_0
* EPD_DC_1\EPD_DC_0
* EPD_CS_1\EPD_CS_0
* EPD_BUSY_1\EPD_BUSY_0
* 3.add:
* #define DEV_Digital_Write(_pin, _value) bcm2835_GPIOI_write(_pin, _value)
* #define DEV_Digital_Read(_pin) bcm2835_GPIOI_lev(_pin)
* #define DEV_SPI_WriteByte(__value) bcm2835_spi_transfer(__value)
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#ifndef _DEV_CONFIG_H_
#define _DEV_CONFIG_H_
#include "pico/stdlib.h"
#include "hardware/spi.h"
#include "stdio.h"
/**
* data
**/
#define UBYTE uint8_t
#define UWORD uint16_t
#define UDOUBLE uint32_t
/**
* GPIOI config
**/
extern int EPD_RST_PIN;
extern int EPD_DC_PIN;
extern int EPD_CS_PIN;
extern int EPD_BUSY_PIN;
extern int EPD_CLK_PIN;
extern int EPD_MOSI_PIN;
/*------------------------------------------------------------------------------------------------------*/
void DEV_Digital_Write(UWORD Pin, UBYTE Value);
UBYTE DEV_Digital_Read(UWORD Pin);
void DEV_SPI_WriteByte(UBYTE Value);
void DEV_SPI_Write_nByte(uint8_t *pData, uint32_t Len);
void DEV_Delay_ms(UDOUBLE xms);
UBYTE DEV_Module_Init(void);
void DEV_Module_Exit(void);
void DEV_GPIO_Init_1(void);
void DEV_SPI_Init(void);
void DEV_SPI_SendData(UBYTE Reg);
UBYTE DEV_SPI_ReadData(void);
#endif
+6
View File
@@ -0,0 +1,6 @@
# Find all source files in a single current directory
# Save the name to DIR_Fonts_SRCS
aux_source_directory(. DIR_Fonts_SRCS)
# Generate the link library
add_library(Fonts ${DIR_Fonts_SRCS})
+1384
View File
File diff suppressed because it is too large. Load diff
+120
View File
@@ -0,0 +1,120 @@
/**
******************************************************************************
* @file Font12.c
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief This file provides text Font12 for STM32xx-EVAL's LCD driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "fonts.h"
//
// Font data for Courier New 12pt
//
const CH_CN Font12CN_Table[] =
{
/*-- 文字: 你 --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"你"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1D,0xC0,0x1D,0x80,0x3B,0xFF,0x3B,0x07,
0x3F,0x77,0x7E,0x76,0xF8,0x70,0xFB,0xFE,0xFB,0xFE,0x3F,0x77,0x3F,0x77,0x3E,0x73,
0x38,0x70,0x38,0x70,0x3B,0xE0,0x00,0x00,0x00,0x00}},
/*-- 文字: 好 --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"好"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x73,0xFF,0x70,0x0F,0xFE,0x1E,
0x7E,0x3C,0x6E,0x38,0xEE,0x30,0xEF,0xFF,0xFC,0x30,0x7C,0x30,0x38,0x30,0x3E,0x30,
0x7E,0x30,0xE0,0x30,0xC1,0xF0,0x00,0x00,0x00,0x00}},
/*-- 文字: 树 --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"树"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0E,0x30,0x0E,0x3F,0xEE,0x30,0xEE,
0xFC,0xFF,0x76,0xCE,0x77,0xFE,0x7B,0xFE,0xFF,0xFE,0xF3,0xDE,0xF3,0xCE,0x37,0xEE,
0x3E,0x6E,0x3C,0x0E,0x30,0x3E,0x00,0x00,0x00,0x00}},
/*-- 文字: 莓 --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"莓"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x70,0xFF,0xFF,0x3E,0x70,0x38,0x00,
0x7F,0xFF,0xE0,0x00,0xFF,0xFC,0x3B,0x8C,0x39,0xCC,0xFF,0xFF,0x73,0x9C,0x71,0xDC,
0x7F,0xFF,0x00,0x1C,0x01,0xF8,0x00,0x00,0x00,0x00}},
/*-- 文字: 派 --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"派"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0x1F,0xFF,0xF0,0x3E,0x00,0x0E,0x1F,
0xCF,0xFB,0xFF,0xF8,0x3F,0xFF,0x0F,0xFF,0x7F,0xD8,0x7F,0xDC,0x6F,0xCE,0xED,0xFF,
0xFD,0xF7,0xF9,0xC0,0x00,0x00,0x00,0x00,0x00,0x00}},
/*-- 文字: a --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"a"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x3E,0x00,0x67,0x00,0x07,0x80,0x0F,0x80,0x7F,0x80,0xE3,0x80,0xE7,0x80,0xE7,0x80,
0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
/*-- 文字: b --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"b"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x00,0x70,0x00,0x70,0x00,0x70,0x00,
0x7F,0x00,0x7B,0x80,0x71,0xC0,0x71,0xC0,0x71,0xC0,0x71,0xC0,0x71,0xC0,0x7B,0x80,
0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
/*-- 文字: c --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"c"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x3F,0x00,0x73,0x00,0xF0,0x00,0xE0,0x00,0xE0,0x00,0xE0,0x00,0xF0,0x00,0x73,0x00,
0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
/*-- 文字: A --*/
/*-- 微软雅黑12; 此字体下对应的点阵为:宽x高=16x21 --*/
{{"A"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x00,0x1F,0x00,0x1F,0x00,
0x1F,0x00,0x3B,0x80,0x3B,0x80,0x71,0x80,0x7F,0xC0,0x71,0xC0,0xE0,0xE0,0xE0,0xE0,
0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00}},
};
cFONT Font12CN = {
Font12CN_Table,
sizeof(Font12CN_Table)/sizeof(CH_CN), /*size of table*/
11, /* ASCII Width */
16, /* Width */
21, /* Height */
};
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+1764
View File
File diff suppressed because it is too large. Load diff
+2142
View File
File diff suppressed because it is too large. Load diff
+2520
View File
File diff suppressed because it is too large. Load diff
+465
View File
@@ -0,0 +1,465 @@
/**
******************************************************************************
* @file Font12.c
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief This file provides text Font12 for STM32xx-EVAL's LCD driver.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "fonts.h"
//
// Font data for Courier New 12pt
//
const CH_CN Font24CN_Table[] =
{
/*-- 文字: 你 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"你"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xC1,0xC0,0x00,
0x01,0xE3,0xE0,0x00,0x03,0xE3,0xC0,0x00,0x03,0xC7,0x80,0x00,0x03,0xC7,0xFF,0xFF,
0x07,0x8F,0xFF,0xFF,0x07,0x8F,0x00,0x0F,0x0F,0x1E,0x00,0x1E,0x0F,0x3C,0x1E,0x1E,
0x1F,0x3C,0x1E,0x3E,0x1F,0x18,0x1E,0x3C,0x3F,0x00,0x1E,0x1C,0x7F,0x00,0x1E,0x00,
0x7F,0x07,0x9E,0x70,0xFF,0x07,0x9E,0xF0,0xEF,0x0F,0x9E,0x78,0x6F,0x0F,0x1E,0x78,
0x0F,0x0F,0x1E,0x3C,0x0F,0x1E,0x1E,0x3C,0x0F,0x1E,0x1E,0x1E,0x0F,0x3C,0x1E,0x1E,
0x0F,0x3C,0x1E,0x1F,0x0F,0x7C,0x1E,0x0F,0x0F,0x78,0x1E,0x0E,0x0F,0x00,0x1E,0x00,
0x0F,0x00,0x1E,0x00,0x0F,0x00,0x3C,0x00,0x0F,0x07,0xFC,0x00,0x0F,0x07,0xF8,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 好 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"好"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,0x0F,0x00,0x00,0x00,
0x0F,0x07,0xFF,0xFE,0x0F,0x07,0xFF,0xFE,0x0F,0x00,0x00,0x3E,0x1E,0x00,0x00,0xFC,
0xFF,0xF8,0x01,0xF0,0xFF,0xF8,0x03,0xE0,0x1E,0x78,0x07,0xC0,0x1E,0x78,0x0F,0x80,
0x3C,0x78,0x0F,0x00,0x3C,0x78,0x0F,0x00,0x3C,0x78,0x0F,0x00,0x3C,0x78,0x0F,0x00,
0x3C,0x7F,0xFF,0xFF,0x78,0xFF,0xFF,0xFF,0x78,0xF0,0x0F,0x00,0x78,0xF0,0x0F,0x00,
0x3D,0xE0,0x0F,0x00,0x1F,0xE0,0x0F,0x00,0x0F,0xE0,0x0F,0x00,0x07,0xC0,0x0F,0x00,
0x07,0xE0,0x0F,0x00,0x07,0xF0,0x0F,0x00,0x0F,0xF8,0x0F,0x00,0x1E,0x7C,0x0F,0x00,
0x3C,0x38,0x0F,0x00,0x78,0x00,0x0F,0x00,0xF0,0x03,0xFF,0x00,0x60,0x01,0xFE,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 微 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"微"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x01,0xE0,0x07,0x87,0x01,0xE0,
0x07,0x07,0x01,0xC0,0x0F,0xF7,0x79,0xC0,0x1E,0xF7,0x7B,0xC0,0x1E,0xF7,0x7B,0x80,
0x3C,0xF7,0x7B,0xFF,0x78,0xF7,0x7B,0xFF,0xF8,0xF7,0x7F,0x9E,0xF7,0xFF,0xFF,0x9E,
0x67,0xFF,0xFF,0x9E,0x07,0x00,0x7F,0x9C,0x0F,0x00,0x0F,0x9C,0x1E,0x00,0x1F,0x9C,
0x1E,0x7F,0xFF,0xBC,0x3E,0x7F,0xF3,0xFC,0x3E,0x00,0x03,0xFC,0x7E,0x00,0x01,0xF8,
0xFE,0x00,0x01,0xF8,0xFE,0x7F,0xE1,0xF8,0xDE,0x7F,0xE1,0xF8,0x1E,0x78,0xE0,0xF0,
0x1E,0x78,0xEE,0xF0,0x1E,0x78,0xFF,0xF0,0x1E,0x78,0xFD,0xF8,0x1E,0x79,0xFB,0xFC,
0x1E,0xF1,0xF7,0xBC,0x1E,0xF0,0xEF,0x9E,0x1F,0xE0,0x0F,0x0F,0x1E,0xC0,0x1E,0x0F,
0x1E,0x00,0x0C,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 软 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"软"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x03,0xC0,0x78,0x00,0x07,0x80,0x78,0x00,0x07,0x80,0x78,0x00,
0x07,0x80,0xF0,0x00,0x0F,0x00,0xF0,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x1E,0x03,0xC0,0x1F,0x1E,0x03,0xC0,0x1E,0x1F,0xE7,0x8F,0x3E,0x3D,0xE7,0x8F,0x3C,
0x3D,0xEF,0x0F,0x7C,0x3D,0xE7,0x0F,0x78,0x79,0xE0,0x0F,0x00,0x79,0xE0,0x0E,0x00,
0x7F,0xFE,0x0E,0x00,0x7F,0xFE,0x1F,0x00,0x01,0xE0,0x1F,0x00,0x01,0xE0,0x1F,0x00,
0x01,0xE0,0x1F,0x80,0x01,0xE0,0x1F,0x80,0x01,0xE0,0x3F,0x80,0x01,0xFF,0x3F,0xC0,
0x0F,0xFF,0x7B,0xC0,0xFF,0xF0,0x79,0xE0,0xF9,0xE0,0xF1,0xF0,0x01,0xE1,0xF0,0xF0,
0x01,0xE3,0xE0,0xF8,0x01,0xE7,0xC0,0x7C,0x01,0xFF,0x80,0x3F,0x01,0xFF,0x00,0x1F,
0x01,0xEC,0x00,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 雅 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"雅"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x77,0x00,0x00,0x00,0xFF,0x00,
0x7F,0xFC,0xF7,0x80,0x7F,0xFD,0xE3,0xC0,0x01,0xC1,0xE3,0xC0,0x01,0xC3,0xC1,0x80,
0x3D,0xC7,0xFF,0xFF,0x39,0xC7,0xFF,0xFF,0x39,0xCF,0x83,0x80,0x79,0xDF,0x83,0x80,
0x79,0xFF,0x83,0x80,0x79,0xDF,0x83,0x80,0x71,0xC3,0x83,0x80,0x7F,0xFF,0xFF,0xFE,
0x7F,0xFF,0xFF,0xFE,0x03,0xC3,0x83,0x80,0x07,0xC3,0x83,0x80,0x07,0xC3,0x83,0x80,
0x0F,0xC3,0x83,0x80,0x0F,0xC3,0x83,0x80,0x1F,0xC3,0xFF,0xFE,0x1D,0xC3,0xFF,0xFE,
0x3D,0xC3,0x83,0x80,0x79,0xC3,0x83,0x80,0xF1,0xC3,0x83,0x80,0xF1,0xC3,0x83,0x80,
0x61,0xC3,0x83,0x80,0x01,0xC3,0xFF,0xFF,0x03,0xC3,0xFF,0xFF,0x1F,0xC3,0x80,0x00,
0x1F,0x83,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 黑 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"黑"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x1F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xFC,0x1E,0x03,0xC0,0x3C,0x1E,0xC3,0xC7,0x3C,
0x1F,0xE3,0xC7,0xBC,0x1E,0xF3,0xCF,0x3C,0x1E,0xFB,0xDF,0x3C,0x1E,0x7B,0xDE,0x3C,
0x1E,0x33,0xDC,0x3C,0x1E,0x03,0xC0,0x3C,0x1F,0xFF,0xFF,0xFC,0x1F,0xFF,0xFF,0xFC,
0x1E,0x03,0xC0,0x3C,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x3F,0xFF,0xFF,0xFC,
0x3F,0xFF,0xFF,0xFC,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x00,0x00,0x1C,0x38,0x70,0x70,
0x3E,0x78,0xF8,0xF8,0x3C,0x7C,0x78,0x7C,0x7C,0x3C,0x3C,0x3E,0xF8,0x3E,0x3C,0x1F,
0xF0,0x1C,0x18,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 此 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"此"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0x3C,0x00,
0x00,0x78,0x3C,0x00,0x00,0x78,0x3C,0x00,0x00,0x78,0x3C,0x00,0x00,0x78,0x3C,0x00,
0x00,0x78,0x3C,0x0C,0x3C,0x78,0x3C,0x1E,0x3C,0x78,0x3C,0x3F,0x3C,0x78,0x3C,0xF8,
0x3C,0x7F,0xFD,0xF0,0x3C,0x7F,0xFF,0xE0,0x3C,0x78,0x3F,0x80,0x3C,0x78,0x3E,0x00,
0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,
0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x00,0x3C,0x78,0x3C,0x0E,0x3C,0x78,0x3C,0x0F,
0x3C,0x78,0x3C,0x0F,0x3C,0x79,0xFC,0x0F,0x3C,0x7F,0xFC,0x0F,0x3F,0xFF,0x3C,0x0F,
0x3F,0xF0,0x3E,0x1E,0xFF,0x00,0x1F,0xFE,0xF0,0x00,0x0F,0xFC,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 字 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"字"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x00,0x00,0x07,0x80,0x00,0x00,0x03,0xC0,0x00,
0x00,0x03,0xE0,0x00,0x00,0x01,0xE0,0x00,0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,
0x78,0x00,0x00,0x1E,0x78,0x00,0x00,0x1E,0x78,0x00,0x00,0x1E,0x78,0x00,0x00,0x1E,
0x7B,0xFF,0xFF,0xDE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0x0F,0xC0,0x00,0x00,0x3F,0x00,
0x00,0x00,0x7E,0x00,0x00,0x01,0xF8,0x00,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,
0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,0x00,0x01,0xE0,0x00,
0x00,0x03,0xE0,0x00,0x00,0x03,0xC0,0x00,0x00,0xFF,0xC0,0x00,0x00,0xFF,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 体 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"体"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x3C,0x00,
0x03,0xC0,0x3C,0x00,0x03,0xC0,0x3C,0x00,0x07,0x80,0x3C,0x00,0x07,0x80,0x3C,0x00,
0x07,0x80,0x3C,0x00,0x0F,0xFF,0xFF,0xFF,0x0F,0xFF,0xFF,0xFF,0x1F,0x01,0xFE,0x00,
0x1F,0x01,0xFF,0x00,0x3F,0x01,0xFF,0x00,0x3F,0x03,0xFF,0x00,0x7F,0x03,0xFF,0x80,
0x7F,0x07,0xBF,0x80,0xFF,0x07,0xBF,0xC0,0xEF,0x0F,0x3D,0xC0,0xCF,0x0F,0x3D,0xE0,
0x0F,0x1E,0x3D,0xE0,0x0F,0x1E,0x3C,0xF0,0x0F,0x3C,0x3C,0x78,0x0F,0x7C,0x3C,0x7C,
0x0F,0xF8,0x3C,0x3E,0x0F,0xF7,0xFF,0xDF,0x0F,0xE7,0xFF,0xCF,0x0F,0xC0,0x3C,0x06,
0x0F,0x00,0x3C,0x00,0x0F,0x00,0x3C,0x00,0x0F,0x00,0x3C,0x00,0x0F,0x00,0x3C,0x00,
0x0F,0x00,0x3C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 下 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"下"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
0x00,0x0F,0xE0,0x00,0x00,0x0F,0xF8,0x00,0x00,0x0F,0xFC,0x00,0x00,0x0F,0xBF,0x00,
0x00,0x0F,0x9F,0x80,0x00,0x0F,0x87,0xE0,0x00,0x0F,0x83,0xF0,0x00,0x0F,0x80,0xF8,
0x00,0x0F,0x80,0x7C,0x00,0x0F,0x80,0x38,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,0x00,0x0F,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 对 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"对"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x78,
0x00,0x00,0x00,0x78,0x00,0x00,0x00,0x78,0x7F,0xFC,0x00,0x78,0x7F,0xFC,0x00,0x78,
0x00,0x3C,0x00,0x78,0x00,0x3F,0xFF,0xFF,0x30,0x3F,0xFF,0xFF,0x78,0x3C,0x00,0x78,
0x3C,0x38,0x00,0x78,0x3E,0x78,0x00,0x78,0x1E,0x78,0xC0,0x78,0x0F,0x79,0xE0,0x78,
0x0F,0xF0,0xF0,0x78,0x07,0xF0,0xF8,0x78,0x03,0xF0,0x78,0x78,0x01,0xE0,0x3C,0x78,
0x03,0xF0,0x3E,0x78,0x03,0xF0,0x18,0x78,0x07,0xF8,0x00,0x78,0x07,0xFC,0x00,0x78,
0x0F,0x3E,0x00,0x78,0x1F,0x1E,0x00,0x78,0x3E,0x1F,0x00,0x78,0x7C,0x0E,0x00,0xF8,
0xF8,0x00,0x00,0xF0,0xF0,0x00,0x3F,0xF0,0x60,0x00,0x3F,0xE0,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 应 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"应"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x01,0xC0,0x00,0x00,0x03,0xE0,0x00,0x00,0x01,0xE0,0x00,
0x00,0x01,0xF0,0x00,0x00,0x00,0xF0,0x00,0x1F,0xFF,0xFF,0xFF,0x1F,0xFF,0xFF,0xFF,
0x1E,0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x1E,0x01,0xE0,0x78,0x1E,0x01,0xE0,0x78,
0x1E,0xE1,0xE0,0x78,0x1F,0xF1,0xF0,0xF8,0x1E,0xF0,0xF0,0xF0,0x1E,0xF0,0xF0,0xF0,
0x1E,0xF8,0xF0,0xF0,0x1E,0x78,0xF1,0xF0,0x1E,0x78,0xF9,0xE0,0x1E,0x78,0x79,0xE0,
0x1E,0x7C,0x7B,0xE0,0x1E,0x3C,0x7B,0xC0,0x1E,0x3C,0x7B,0xC0,0x1E,0x3C,0x7B,0xC0,
0x3C,0x3E,0x07,0x80,0x3C,0x1C,0x07,0x80,0x3C,0x00,0x07,0x80,0x3C,0x00,0x0F,0x00,
0x78,0x00,0x0F,0x00,0x7B,0xFF,0xFF,0xFF,0xF3,0xFF,0xFF,0xFF,0xF0,0x00,0x00,0x00,
0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 的 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"的"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x80,0x3C,0x00,0x07,0xC0,0x3E,0x00,
0x07,0x80,0x3C,0x00,0x07,0x80,0x7C,0x00,0x0F,0x00,0x78,0x00,0x7F,0xFE,0x7F,0xFE,
0x7F,0xFE,0xFF,0xFE,0x78,0x1E,0xF0,0x1E,0x78,0x1F,0xE0,0x1E,0x78,0x1F,0xE0,0x1E,
0x78,0x1F,0xC0,0x1E,0x78,0x1F,0xC0,0x1E,0x78,0x1F,0xF0,0x1E,0x78,0x1E,0xF8,0x1E,
0x78,0x1E,0x7C,0x1E,0x7F,0xFE,0x3C,0x1E,0x7F,0xFE,0x1E,0x1E,0x78,0x1E,0x1F,0x1E,
0x78,0x1E,0x0F,0x9E,0x78,0x1E,0x07,0x9E,0x78,0x1E,0x07,0x1E,0x78,0x1E,0x00,0x1E,
0x78,0x1E,0x00,0x1E,0x78,0x1E,0x00,0x3E,0x78,0x1E,0x00,0x3C,0x78,0x1E,0x00,0x3C,
0x7F,0xFE,0x00,0x3C,0x7F,0xFE,0x00,0x7C,0x78,0x1E,0x3F,0xF8,0x78,0x1E,0x3F,0xF0,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 点 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"点"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xFF,0xFF,0x00,0x03,0xFF,0xFF,
0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0x0F,0xFF,0xFF,0xF8,0x0F,0xFF,0xFF,0xF8,0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,
0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,0x0F,0x00,0x00,0x78,
0x0F,0xFF,0xFF,0xF8,0x0F,0xFF,0xFF,0xF8,0x0F,0x00,0x00,0x78,0x00,0x00,0x00,0x00,
0x0C,0x38,0x38,0x30,0x1E,0x7C,0x78,0x78,0x3E,0x3C,0x78,0x78,0x3C,0x3C,0x3C,0x3C,
0x7C,0x3E,0x3C,0x3E,0xF8,0x1E,0x3C,0x1E,0xF0,0x1E,0x1E,0x1F,0x70,0x1E,0x1C,0x0E,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 阵 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"阵"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x78,0x00,
0x7F,0xF0,0x78,0x00,0x7F,0xF0,0x78,0x00,0x79,0xFF,0xFF,0xFF,0x79,0xFF,0xFF,0xFF,
0x79,0xE1,0xE0,0x00,0x79,0xE1,0xE0,0x00,0x7B,0xC1,0xEF,0x80,0x7B,0xC3,0xCF,0x80,
0x7B,0xC3,0xCF,0x80,0x7F,0x87,0xCF,0x80,0x7F,0x87,0x8F,0x80,0x7F,0x87,0x8F,0x80,
0x7B,0xCF,0x0F,0x80,0x7B,0xCF,0xFF,0xFE,0x79,0xEF,0xFF,0xFE,0x79,0xE0,0x0F,0x80,
0x78,0xE0,0x0F,0x80,0x78,0xF0,0x0F,0x80,0x78,0xF0,0x0F,0x80,0x78,0xF0,0x0F,0x80,
0x78,0xFF,0xFF,0xFF,0x79,0xFF,0xFF,0xFF,0x7F,0xE0,0x0F,0x80,0x7F,0xC0,0x0F,0x80,
0x78,0x00,0x0F,0x80,0x78,0x00,0x0F,0x80,0x78,0x00,0x0F,0x80,0x78,0x00,0x0F,0x80,
0x78,0x00,0x0F,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 为 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"为"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,
0x0E,0x07,0x80,0x00,0x1F,0x07,0x80,0x00,0x0F,0x87,0x80,0x00,0x07,0xC7,0x80,0x00,
0x01,0xE7,0x80,0x00,0x00,0xC7,0x80,0x00,0x00,0x07,0x80,0x00,0x7F,0xFF,0xFF,0xFC,
0x7F,0xFF,0xFF,0xFC,0x00,0x07,0x80,0x3C,0x00,0x0F,0x80,0x3C,0x00,0x0F,0x00,0x3C,
0x00,0x0F,0x00,0x3C,0x00,0x0F,0x60,0x3C,0x00,0x1F,0xF0,0x3C,0x00,0x1E,0x78,0x3C,
0x00,0x3E,0x3C,0x3C,0x00,0x3C,0x3E,0x3C,0x00,0x7C,0x1F,0x3C,0x00,0x78,0x0F,0x3C,
0x00,0xF8,0x06,0x3C,0x01,0xF0,0x00,0x3C,0x03,0xE0,0x00,0x7C,0x07,0xC0,0x00,0x7C,
0x0F,0x80,0x00,0x78,0x1F,0x00,0x00,0xF8,0x3E,0x00,0xFF,0xF0,0x7C,0x00,0xFF,0xE0,
0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 树 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"树"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x00,0x00,0x38,
0x0F,0x00,0x00,0x38,0x0F,0x00,0x00,0x38,0x0F,0x3F,0xF8,0x38,0x0F,0x3F,0xF8,0x38,
0x0F,0x00,0x78,0x38,0xFF,0xE0,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0x0F,0x00,0x70,0x38,
0x0F,0x18,0xF0,0x38,0x1F,0x3C,0xF0,0x38,0x1F,0x1C,0xFE,0x38,0x1F,0xDE,0xFE,0x38,
0x3F,0xEF,0xEF,0x38,0x3F,0xFF,0xEF,0x38,0x3F,0xF7,0xE7,0xB8,0x7F,0x67,0xC7,0xB8,
0x7F,0x03,0xC3,0xB8,0xFF,0x07,0xE0,0x38,0xEF,0x07,0xE0,0x38,0xEF,0x0F,0xF0,0x38,
0xCF,0x1F,0xF0,0x38,0x0F,0x1E,0x78,0x38,0x0F,0x3C,0x7C,0x38,0x0F,0x78,0x3C,0x38,
0x0F,0xF8,0x38,0x38,0x0F,0x60,0x00,0x78,0x0F,0x00,0x0F,0xF8,0x0F,0x00,0x07,0xF0,
0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 莓 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"莓"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x1E,0x00,0x00,0x3C,0x1E,0x00,
0x00,0x3C,0x1E,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x3C,0x1E,0x00,
0x07,0xBC,0x1E,0x00,0x07,0x80,0x00,0x00,0x0F,0xFF,0xFF,0xFC,0x0F,0xFF,0xFF,0xFC,
0x1E,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x7F,0xFF,0xFF,0xF0,
0xF7,0xFF,0xFF,0xF0,0x37,0x83,0x80,0xF0,0x07,0x87,0xC0,0xF0,0x07,0x83,0xF0,0xF0,
0x07,0x00,0xE0,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x0F,0x0F,0x00,0xE0,
0x0F,0x0F,0x81,0xE0,0x0E,0x03,0xE1,0xE0,0x1E,0x01,0xC1,0xE0,0x1F,0xFF,0xFF,0xFE,
0x1F,0xFF,0xFF,0xFE,0x00,0x00,0x01,0xE0,0x00,0x00,0x03,0xC0,0x00,0x00,0xFF,0xC0,
0x00,0x00,0xFF,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 派 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"派"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x00,0x3E,
0x7C,0x00,0x3F,0xFE,0x3F,0x3F,0xFF,0xF0,0x1F,0xBF,0xE0,0x00,0x07,0xBC,0x00,0x00,
0x03,0x3C,0x00,0x00,0x00,0x3C,0x00,0x3C,0x00,0x3C,0x0F,0xFE,0x70,0x3D,0xFF,0xF8,
0xF8,0x3D,0xFF,0x00,0x7C,0x3D,0xE7,0x80,0x3F,0x3D,0xE7,0x80,0x1F,0x3D,0xE7,0x8E,
0x0E,0x3D,0xE7,0x9F,0x00,0x3D,0xE7,0xFE,0x00,0x39,0xE7,0xF8,0x00,0x39,0xE3,0xF0,
0x1C,0x39,0xE3,0xC0,0x1E,0x79,0xE3,0xC0,0x1E,0x79,0xE1,0xE0,0x1E,0x79,0xE1,0xE0,
0x3C,0x79,0xE0,0xF0,0x3C,0x79,0xE0,0xF8,0x3C,0xF1,0xE0,0x7C,0x3C,0xF1,0xE3,0x7C,
0x7D,0xF1,0xEF,0x3F,0x79,0xE1,0xFE,0x1F,0x7B,0xE1,0xF8,0x0E,0x7B,0xC3,0xE0,0x00,
0x79,0x81,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: A --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{
"A"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x7C,0x00,0x00,0x00,0xFC,0x00,0x00,0x00,0xFE,0x00,0x00,0x00,0xFE,0x00,0x00,
0x01,0xFF,0x00,0x00,0x01,0xFF,0x00,0x00,0x01,0xEF,0x00,0x00,0x03,0xEF,0x80,0x00,
0x03,0xCF,0x80,0x00,0x07,0xC7,0x80,0x00,0x07,0xC7,0xC0,0x00,0x07,0x87,0xC0,0x00,
0x0F,0x83,0xE0,0x00,0x0F,0x83,0xE0,0x00,0x0F,0x01,0xE0,0x00,0x1F,0xFF,0xF0,0x00,
0x1F,0xFF,0xF0,0x00,0x3F,0xFF,0xF8,0x00,0x3E,0x00,0xF8,0x00,0x3C,0x00,0xF8,0x00,
0x7C,0x00,0x7C,0x00,0x7C,0x00,0x7C,0x00,0x78,0x00,0x3C,0x00,0xF8,0x00,0x3E,0x00,
0xF8,0x00,0x3E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: a --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"a"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0xF8,0x00,0x00,
0x1F,0xFE,0x00,0x00,0x3F,0xFE,0x00,0x00,0x3E,0x3F,0x00,0x00,0x38,0x1F,0x00,0x00,
0x00,0x0F,0x00,0x00,0x00,0x0F,0x00,0x00,0x03,0xFF,0x00,0x00,0x1F,0xFF,0x00,0x00,
0x3F,0x8F,0x00,0x00,0x7C,0x0F,0x00,0x00,0x7C,0x0F,0x00,0x00,0x78,0x1F,0x00,0x00,
0x7C,0x1F,0x00,0x00,0x7E,0x7F,0x00,0x00,0x7F,0xFF,0x00,0x00,0x3F,0xFF,0x00,0x00,
0x0F,0xCF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: b --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"b"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,
0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,
0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0x00,0x00,0x00,0x3C,0xFE,0x00,0x00,
0x3D,0xFF,0x80,0x00,0x3F,0xFF,0xC0,0x00,0x3F,0x8F,0xC0,0x00,0x3F,0x07,0xE0,0x00,
0x3E,0x03,0xE0,0x00,0x3E,0x03,0xE0,0x00,0x3C,0x01,0xE0,0x00,0x3C,0x01,0xE0,0x00,
0x3C,0x01,0xE0,0x00,0x3C,0x03,0xE0,0x00,0x3E,0x03,0xE0,0x00,0x3E,0x03,0xE0,0x00,
0x3F,0x07,0xC0,0x00,0x3F,0x8F,0xC0,0x00,0x3F,0xFF,0x80,0x00,0x3F,0xFF,0x00,0x00,
0x3C,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: c --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"c"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFC,0x00,0x00,
0x07,0xFE,0x00,0x00,0x1F,0xFE,0x00,0x00,0x3F,0x86,0x00,0x00,0x3E,0x00,0x00,0x00,
0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x78,0x00,0x00,0x00,
0x78,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,0x7C,0x00,0x00,0x00,
0x3E,0x00,0x00,0x00,0x3F,0x86,0x00,0x00,0x1F,0xFE,0x00,0x00,0x0F,0xFE,0x00,0x00,
0x03,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 微 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"微"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x01,0xE0,0x07,0x87,0x01,0xE0,
0x07,0x07,0x01,0xC0,0x0F,0xF7,0x79,0xC0,0x1E,0xF7,0x7B,0xC0,0x1E,0xF7,0x7B,0x80,
0x3C,0xF7,0x7B,0xFF,0x78,0xF7,0x7B,0xFF,0xF8,0xF7,0x7F,0x9E,0xF7,0xFF,0xFF,0x9E,
0x67,0xFF,0xFF,0x9E,0x07,0x00,0x7F,0x9C,0x0F,0x00,0x0F,0x9C,0x1E,0x00,0x1F,0x9C,
0x1E,0x7F,0xFF,0xBC,0x3E,0x7F,0xF3,0xFC,0x3E,0x00,0x03,0xFC,0x7E,0x00,0x01,0xF8,
0xFE,0x00,0x01,0xF8,0xFE,0x7F,0xE1,0xF8,0xDE,0x7F,0xE1,0xF8,0x1E,0x78,0xE0,0xF0,
0x1E,0x78,0xEE,0xF0,0x1E,0x78,0xFF,0xF0,0x1E,0x78,0xFD,0xF8,0x1E,0x79,0xFB,0xFC,
0x1E,0xF1,0xF7,0xBC,0x1E,0xF0,0xEF,0x9E,0x1F,0xE0,0x0F,0x0F,0x1E,0xC0,0x1E,0x0F,
0x1E,0x00,0x0C,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 雪 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"雪"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x78,0x03,0xC0,0x1E,0x78,0x03,0xC0,0x1E,
0x7F,0xFF,0xFF,0xFE,0x7F,0xFF,0xFF,0xFE,0x00,0x03,0xC0,0x00,0x00,0x03,0xC0,0x00,
0x07,0xFF,0xFF,0xE0,0x07,0xFF,0xFF,0xE0,0x00,0x03,0xC0,0x00,0x00,0x00,0x00,0x00,
0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0x78,
0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x78,0x00,0x00,0x00,0x78,
0x00,0x00,0x00,0x78,0x3F,0xFF,0xFF,0xF8,0x3F,0xFF,0xFF,0xF8,0x00,0x00,0x00,0x78,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 电 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"电"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0x07,0x80,0x00,
0x00,0x07,0x80,0x00,0x00,0x07,0x80,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xF8,
0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,
0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xF8,
0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,
0x78,0x07,0x80,0xF8,0x78,0x07,0x80,0xF8,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xF8,
0x78,0x07,0x80,0x0E,0x78,0x07,0x80,0x0F,0x00,0x07,0x80,0x0F,0x00,0x07,0x80,0x0F,
0x00,0x07,0x80,0x1F,0x00,0x07,0x80,0x1E,0x00,0x03,0xFF,0xFE,0x00,0x01,0xFF,0xFC,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
/*-- 文字: 子 --*/
/*-- 微软雅黑24; 此字体下对应的点阵为:宽x高=32x41 --*/
{{"子"},{
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x1F,0xFF,0xFF,0xF8,0x1F,0xFF,0xFF,0xF8,0x00,0x00,0x01,0xF8,0x00,0x00,0x07,0xE0,
0x00,0x00,0x0F,0xC0,0x00,0x00,0x1F,0x80,0x00,0x00,0x3E,0x00,0x00,0x00,0xFC,0x00,
0x00,0x01,0xF8,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,0x00,0x03,0xE0,0x00,
0x00,0x03,0xE0,0x00,0x00,0x03,0xC0,0x00,0x01,0xFF,0xC0,0x00,0x00,0xFF,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00}},
};
cFONT Font24CN = {
Font24CN_Table,
sizeof(Font24CN_Table)/sizeof(CH_CN), /*size of table*/
24, /* ASCII Width */
32, /* Width */
41, /* Height */
};
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+1004
View File
File diff suppressed because it is too large. Load diff
+96
View File
@@ -0,0 +1,96 @@
/**
******************************************************************************
* @file fonts.h
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief Header for fonts.c file
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __FONTS_H
#define __FONTS_H
/*最大字体微软雅黑24 (32x41) */
#define MAX_HEIGHT_FONT 41
#define MAX_WIDTH_FONT 32
#define OFFSET_BITMAP
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include <stdint.h>
//ASCII
typedef struct _tFont
{
const uint8_t *table;
uint16_t Width;
uint16_t Height;
} sFONT;
//GB2312
typedef struct // 汉字字模数据结构
{
const char index[2]; // 汉字内码索引
const char matrix[MAX_HEIGHT_FONT*MAX_WIDTH_FONT/8+2]; // 点阵码数据
}CH_CN;
typedef struct
{
const CH_CN *table;
uint16_t size;
uint16_t ASCII_Width;
uint16_t Width;
uint16_t Height;
}cFONT;
extern sFONT Font24;
extern sFONT Font20;
extern sFONT Font16;
extern sFONT Font12;
extern sFONT Font8;
extern cFONT Font12CN;
extern cFONT Font24CN;
#ifdef __cplusplus
}
#endif
#endif /* __FONTS_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+9
View File
@@ -0,0 +1,9 @@
# Find all source files in a single current directory
# Save the name to DIR_GUI_SRCS
aux_source_directory(. DIR_GUI_SRCS)
include_directories(../Config)
# Generate the link library
add_library(GUI ${DIR_GUI_SRCS})
target_link_libraries(GUI PUBLIC Config)
+779
View File
@@ -0,0 +1,779 @@
/******************************************************************************
* | File : GUI_Paint.c
* | Author : Waveshare electronics
* | Function : Achieve drawing: draw points, lines, boxes, circles and
* their size, solid dotted line, solid rectangle hollow
* rectangle, solid circle hollow circle.
* | Info :
* Achieve display characters: Display a single character, string, number
* Achieve time display: adaptive size display time minutes and seconds
*----------------
* | This version: V3.2
* | Date : 2020-07-10
* | Info :
* -----------------------------------------------------------------------------
* V3.2(2020-07-10):
* 1.Change: Paint_SetScale(UBYTE scale)
* Add scale 7 for 5.65f e-Parper
* 2.Change: Paint_SetPixel(UWORD Xpoint, UWORD Ypoint, UWORD Color)
* Add the branch for scale 7
* 3.Change: Paint_Clear(UWORD Color)
* Add the branch for scale 7
* -----------------------------------------------------------------------------
* V3.1(2019-10-10):
* 1. Add gray level
* PAINT Add Scale
* 2. Add void Paint_SetScale(UBYTE scale);
* -----------------------------------------------------------------------------
* V3.0(2019-04-18):
* 1.Change:
* Paint_DrawPoint(..., DOT_STYLE DOT_STYLE)
* => Paint_DrawPoint(..., DOT_STYLE Dot_Style)
* Paint_DrawLine(..., LINE_STYLE Line_Style, DOT_PIXEL Dot_Pixel)
* => Paint_DrawLine(..., DOT_PIXEL Line_width, LINE_STYLE Line_Style)
* Paint_DrawRectangle(..., DRAW_FILL Filled, DOT_PIXEL Dot_Pixel)
* => Paint_DrawRectangle(..., DOT_PIXEL Line_width, DRAW_FILL Draw_Fill)
* Paint_DrawCircle(..., DRAW_FILL Draw_Fill, DOT_PIXEL Dot_Pixel)
* => Paint_DrawCircle(..., DOT_PIXEL Line_width, DRAW_FILL Draw_Filll)
*
* -----------------------------------------------------------------------------
* V2.0(2018-11-15):
* 1.add: Paint_NewImage()
* Create an image's properties
* 2.add: Paint_SelectImage()
* Select the picture to be drawn
* 3.add: Paint_SetRotate()
* Set the direction of the cache
* 4.add: Paint_RotateImage()
* Can flip the picture, Support 0-360 degrees,
* but only 90.180.270 rotation is better
* 4.add: Paint_SetMirroring()
* Can Mirroring the picture, horizontal, vertical, origin
* 5.add: Paint_DrawString_CN()
* Can display Chinese(GB1312)
*
* -----------------------------------------------------------------------------
* V1.0(2018-07-17):
* Create library
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
******************************************************************************/
#include "GUI_Paint.h"
#include "DEV_Config.h"
#include "Debug.h"
#include <stdint.h>
#include <stdlib.h>
#include <string.h> //memset()
#include <math.h>
PAINT Paint;
/******************************************************************************
function: Create Image
parameter:
image : Pointer to the image cache
width : The width of the picture
Height : The height of the picture
Color : Whether the picture is inverted
******************************************************************************/
void Paint_NewImage(UBYTE *image, UWORD Width, UWORD Height, UWORD Rotate, UWORD Color)
{
Paint.Image = NULL;
Paint.Image = image;
Paint.WidthMemory = Width;
Paint.HeightMemory = Height;
Paint.Color = Color;
Paint.Scale = 2;
Paint.WidthByte = (Width % 8 == 0)? (Width / 8 ): (Width / 8 + 1);
Paint.HeightByte = Height;
// printf("WidthByte = %d, HeightByte = %d\r\n", Paint.WidthByte, Paint.HeightByte);
// printf(" EPD_WIDTH / 8 = %d\r\n", 122 / 8);
Paint.Rotate = Rotate;
Paint.Mirror = MIRROR_NONE;
if(Rotate == ROTATE_0 || Rotate == ROTATE_180) {
Paint.Width = Width;
Paint.Height = Height;
} else {
Paint.Width = Height;
Paint.Height = Width;
}
}
/******************************************************************************
function: Select Image
parameter:
image : Pointer to the image cache
******************************************************************************/
void Paint_SelectImage(UBYTE *image)
{
Paint.Image = image;
}
/******************************************************************************
function: Select Image Rotate
parameter:
Rotate : 0,90,180,270
******************************************************************************/
void Paint_SetRotate(UWORD Rotate)
{
if(Rotate == ROTATE_0 || Rotate == ROTATE_90 || Rotate == ROTATE_180 || Rotate == ROTATE_270) {
Debug("Set image Rotate %d\r\n", Rotate);
Paint.Rotate = Rotate;
} else {
Debug("rotate = 0, 90, 180, 270\r\n");
}
}
/******************************************************************************
function: Select Image mirror
parameter:
mirror :Not mirror,Horizontal mirror,Vertical mirror,Origin mirror
******************************************************************************/
void Paint_SetMirroring(UBYTE mirror)
{
if(mirror == MIRROR_NONE || mirror == MIRROR_HORIZONTAL ||
mirror == MIRROR_VERTICAL || mirror == MIRROR_ORIGIN) {
Debug("mirror image x:%s, y:%s\r\n",(mirror & 0x01)? "mirror":"none", ((mirror >> 1) & 0x01)? "mirror":"none");
Paint.Mirror = mirror;
} else {
Debug("mirror should be MIRROR_NONE, MIRROR_HORIZONTAL, \
MIRROR_VERTICAL or MIRROR_ORIGIN\r\n");
}
}
void Paint_SetScale(UBYTE scale)
{
if(scale == 2){
Paint.Scale = scale;
Paint.WidthByte = (Paint.WidthMemory % 8 == 0)? (Paint.WidthMemory / 8 ): (Paint.WidthMemory / 8 + 1);
}else if(scale == 4){
Paint.Scale = scale;
Paint.WidthByte = (Paint.WidthMemory % 4 == 0)? (Paint.WidthMemory / 4 ): (Paint.WidthMemory / 4 + 1);
}else if(scale == 7){//Only applicable with 5in65 e-Paper
Paint.Scale = scale;
Paint.WidthByte = (Paint.WidthMemory % 2 == 0)? (Paint.WidthMemory / 2 ): (Paint.WidthMemory / 2 + 1);;
}else{
Debug("Set Scale Input parameter error\r\n");
Debug("Scale Only support: 2 4 7\r\n");
}
}
/******************************************************************************
function: Draw Pixels
parameter:
Xpoint : At point X
Ypoint : At point Y
Color : Painted colors
******************************************************************************/
void Paint_SetPixel(UWORD Xpoint, UWORD Ypoint, UWORD Color)
{
if(Xpoint > Paint.Width || Ypoint > Paint.Height){
Debug("Exceeding display boundaries\r\n");
return;
}
UWORD X, Y;
switch(Paint.Rotate) {
case 0:
X = Xpoint;
Y = Ypoint;
break;
case 90:
X = Paint.WidthMemory - Ypoint - 1;
Y = Xpoint;
break;
case 180:
X = Paint.WidthMemory - Xpoint - 1;
Y = Paint.HeightMemory - Ypoint - 1;
break;
case 270:
X = Ypoint;
Y = Paint.HeightMemory - Xpoint - 1;
break;
default:
return;
}
switch(Paint.Mirror) {
case MIRROR_NONE:
break;
case MIRROR_HORIZONTAL:
X = Paint.WidthMemory - X - 1;
break;
case MIRROR_VERTICAL:
Y = Paint.HeightMemory - Y - 1;
break;
case MIRROR_ORIGIN:
X = Paint.WidthMemory - X - 1;
Y = Paint.HeightMemory - Y - 1;
break;
default:
return;
}
if(X > Paint.WidthMemory || Y > Paint.HeightMemory){
Debug("Exceeding display boundaries\r\n");
return;
}
if(Paint.Scale == 2){
UDOUBLE Addr = X / 8 + Y * Paint.WidthByte;
UBYTE Rdata = Paint.Image[Addr];
if(Color == BLACK)
Paint.Image[Addr] = Rdata & ~(0x80 >> (X % 8));
else
Paint.Image[Addr] = Rdata | (0x80 >> (X % 8));
}else if(Paint.Scale == 4){
UDOUBLE Addr = X / 4 + Y * Paint.WidthByte;
Color = Color % 4;//Guaranteed color scale is 4 --- 0~3
UBYTE Rdata = Paint.Image[Addr];
Rdata = Rdata & (~(0xC0 >> ((X % 4)*2)));//Clear first, then set value
Paint.Image[Addr] = Rdata | ((Color << 6) >> ((X % 4)*2));
}else if(Paint.Scale == 7){
UDOUBLE Addr = X / 2 + Y * Paint.WidthByte;
UBYTE Rdata = Paint.Image[Addr];
Rdata = Rdata & (~(0xF0 >> ((X % 2)*4)));//Clear first, then set value
Paint.Image[Addr] = Rdata | ((Color << 4) >> ((X % 2)*4));
// printf("Add = %d ,data = %d\r\n",Addr,Rdata);
}
}
/******************************************************************************
function: Clear the color of the picture
parameter:
Color : Painted colors
******************************************************************************/
void Paint_Clear(UWORD Color)
{
if(Paint.Scale == 2 || Paint.Scale == 4){
for (UWORD Y = 0; Y < Paint.HeightByte; Y++) {
for (UWORD X = 0; X < Paint.WidthByte; X++ ) {//8 pixel = 1 byte
UDOUBLE Addr = X + Y*Paint.WidthByte;
Paint.Image[Addr] = Color;
}
}
}else if(Paint.Scale == 7){
for (UWORD Y = 0; Y < Paint.HeightByte; Y++) {
for (UWORD X = 0; X < Paint.WidthByte; X++ ) {
UDOUBLE Addr = X + Y*Paint.WidthByte;
Paint.Image[Addr] = (Color<<4)|Color;
}
}
}
}
/******************************************************************************
function: Clear the color of a window
parameter:
Xstart : x starting point
Ystart : Y starting point
Xend : x end point
Yend : y end point
Color : Painted colors
******************************************************************************/
void Paint_ClearWindows(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend, UWORD Color)
{
UWORD X, Y;
for (Y = Ystart; Y < Yend; Y++) {
for (X = Xstart; X < Xend; X++) {//8 pixel = 1 byte
Paint_SetPixel(X, Y, Color);
}
}
}
/******************************************************************************
function: Draw Point(Xpoint, Ypoint) Fill the color
parameter:
Xpoint : The Xpoint coordinate of the point
Ypoint : The Ypoint coordinate of the point
Color : Painted color
Dot_Pixel : point size
Dot_Style : point Style
******************************************************************************/
void Paint_DrawPoint(UWORD Xpoint, UWORD Ypoint, UWORD Color,
DOT_PIXEL Dot_Pixel, DOT_STYLE Dot_Style)
{
if (Xpoint > Paint.Width || Ypoint > Paint.Height) {
Debug("Paint_DrawPoint Input exceeds the normal display range\r\n");
return;
}
int16_t XDir_Num , YDir_Num;
if (Dot_Style == DOT_FILL_AROUND) {
for (XDir_Num = 0; XDir_Num < 2 * Dot_Pixel - 1; XDir_Num++) {
for (YDir_Num = 0; YDir_Num < 2 * Dot_Pixel - 1; YDir_Num++) {
if(Xpoint + XDir_Num - Dot_Pixel < 0 || Ypoint + YDir_Num - Dot_Pixel < 0)
break;
// printf("x = %d, y = %d\r\n", Xpoint + XDir_Num - Dot_Pixel, Ypoint + YDir_Num - Dot_Pixel);
Paint_SetPixel(Xpoint + XDir_Num - Dot_Pixel, Ypoint + YDir_Num - Dot_Pixel, Color);
}
}
} else {
for (XDir_Num = 0; XDir_Num < Dot_Pixel; XDir_Num++) {
for (YDir_Num = 0; YDir_Num < Dot_Pixel; YDir_Num++) {
Paint_SetPixel(Xpoint + XDir_Num - 1, Ypoint + YDir_Num - 1, Color);
}
}
}
}
/******************************************************************************
function: Draw a line of arbitrary slope
parameter:
Xstart :Starting Xpoint point coordinates
Ystart :Starting Xpoint point coordinates
Xend :End point Xpoint coordinate
Yend :End point Ypoint coordinate
Color :The color of the line segment
Line_width : Line width
Line_Style: Solid and dotted lines
******************************************************************************/
void Paint_DrawLine(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend,
UWORD Color, DOT_PIXEL Line_width, LINE_STYLE Line_Style)
{
if (Xstart > Paint.Width || Ystart > Paint.Height ||
Xend > Paint.Width || Yend > Paint.Height) {
Debug("Paint_DrawLine Input exceeds the normal display range\r\n");
return;
}
UWORD Xpoint = Xstart;
UWORD Ypoint = Ystart;
int dx = (int)Xend - (int)Xstart >= 0 ? Xend - Xstart : Xstart - Xend;
int dy = (int)Yend - (int)Ystart <= 0 ? Yend - Ystart : Ystart - Yend;
// Increment direction, 1 is positive, -1 is counter;
int XAddway = Xstart < Xend ? 1 : -1;
int YAddway = Ystart < Yend ? 1 : -1;
//Cumulative error
int Esp = dx + dy;
char Dotted_Len = 0;
for (;;) {
Dotted_Len++;
//Painted dotted line, 2 point is really virtual
if (Line_Style == LINE_STYLE_DOTTED && Dotted_Len % 3 == 0) {
//Debug("LINE_DOTTED\r\n");
Paint_DrawPoint(Xpoint, Ypoint, IMAGE_BACKGROUND, Line_width, DOT_STYLE_DFT);
Dotted_Len = 0;
} else {
Paint_DrawPoint(Xpoint, Ypoint, Color, Line_width, DOT_STYLE_DFT);
}
if (2 * Esp >= dy) {
if (Xpoint == Xend)
break;
Esp += dy;
Xpoint += XAddway;
}
if (2 * Esp <= dx) {
if (Ypoint == Yend)
break;
Esp += dx;
Ypoint += YAddway;
}
}
}
/******************************************************************************
function: Draw a rectangle
parameter:
Xstart :Rectangular Starting Xpoint point coordinates
Ystart :Rectangular Starting Xpoint point coordinates
Xend :Rectangular End point Xpoint coordinate
Yend :Rectangular End point Ypoint coordinate
Color :The color of the Rectangular segment
Line_width: Line width
Draw_Fill : Whether to fill the inside of the rectangle
******************************************************************************/
void Paint_DrawRectangle(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend,
UWORD Color, DOT_PIXEL Line_width, DRAW_FILL Draw_Fill)
{
if (Xstart > Paint.Width || Ystart > Paint.Height ||
Xend > Paint.Width || Yend > Paint.Height) {
Debug("Input exceeds the normal display range\r\n");
return;
}
if (Draw_Fill) {
UWORD Ypoint;
for(Ypoint = Ystart; Ypoint < Yend; Ypoint++) {
Paint_DrawLine(Xstart, Ypoint, Xend, Ypoint, Color , Line_width, LINE_STYLE_SOLID);
}
} else {
Paint_DrawLine(Xstart, Ystart, Xend, Ystart, Color, Line_width, LINE_STYLE_SOLID);
Paint_DrawLine(Xstart, Ystart, Xstart, Yend, Color, Line_width, LINE_STYLE_SOLID);
Paint_DrawLine(Xend, Yend, Xend, Ystart, Color, Line_width, LINE_STYLE_SOLID);
Paint_DrawLine(Xend, Yend, Xstart, Yend, Color, Line_width, LINE_STYLE_SOLID);
}
}
/******************************************************************************
function: Use the 8-point method to draw a circle of the
specified size at the specified position->
parameter:
X_Center :Center X coordinate
Y_Center :Center Y coordinate
Radius :circle Radius
Color :The color of the :circle segment
Line_width: Line width
Draw_Fill : Whether to fill the inside of the Circle
******************************************************************************/
void Paint_DrawCircle(UWORD X_Center, UWORD Y_Center, UWORD Radius,
UWORD Color, DOT_PIXEL Line_width, DRAW_FILL Draw_Fill)
{
if (X_Center > Paint.Width || Y_Center >= Paint.Height) {
Debug("Paint_DrawCircle Input exceeds the normal display range\r\n");
return;
}
//Draw a circle from(0, R) as a starting point
int16_t XCurrent, YCurrent;
XCurrent = 0;
YCurrent = Radius;
//Cumulative error,judge the next point of the logo
int16_t Esp = 3 - (Radius << 1 );
int16_t sCountY;
if (Draw_Fill == DRAW_FILL_FULL) {
while (XCurrent <= YCurrent ) { //Realistic circles
for (sCountY = XCurrent; sCountY <= YCurrent; sCountY ++ ) {
Paint_DrawPoint(X_Center + XCurrent, Y_Center + sCountY, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//1
Paint_DrawPoint(X_Center - XCurrent, Y_Center + sCountY, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//2
Paint_DrawPoint(X_Center - sCountY, Y_Center + XCurrent, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//3
Paint_DrawPoint(X_Center - sCountY, Y_Center - XCurrent, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//4
Paint_DrawPoint(X_Center - XCurrent, Y_Center - sCountY, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//5
Paint_DrawPoint(X_Center + XCurrent, Y_Center - sCountY, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//6
Paint_DrawPoint(X_Center + sCountY, Y_Center - XCurrent, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);//7
Paint_DrawPoint(X_Center + sCountY, Y_Center + XCurrent, Color, DOT_PIXEL_DFT, DOT_STYLE_DFT);
}
if (Esp < 0 )
Esp += 4 * XCurrent + 6;
else {
Esp += 10 + 4 * (XCurrent - YCurrent );
YCurrent --;
}
XCurrent ++;
}
} else { //Draw a hollow circle
while (XCurrent <= YCurrent ) {
Paint_DrawPoint(X_Center + XCurrent, Y_Center + YCurrent, Color, Line_width, DOT_STYLE_DFT);//1
Paint_DrawPoint(X_Center - XCurrent, Y_Center + YCurrent, Color, Line_width, DOT_STYLE_DFT);//2
Paint_DrawPoint(X_Center - YCurrent, Y_Center + XCurrent, Color, Line_width, DOT_STYLE_DFT);//3
Paint_DrawPoint(X_Center - YCurrent, Y_Center - XCurrent, Color, Line_width, DOT_STYLE_DFT);//4
Paint_DrawPoint(X_Center - XCurrent, Y_Center - YCurrent, Color, Line_width, DOT_STYLE_DFT);//5
Paint_DrawPoint(X_Center + XCurrent, Y_Center - YCurrent, Color, Line_width, DOT_STYLE_DFT);//6
Paint_DrawPoint(X_Center + YCurrent, Y_Center - XCurrent, Color, Line_width, DOT_STYLE_DFT);//7
Paint_DrawPoint(X_Center + YCurrent, Y_Center + XCurrent, Color, Line_width, DOT_STYLE_DFT);//0
if (Esp < 0 )
Esp += 4 * XCurrent + 6;
else {
Esp += 10 + 4 * (XCurrent - YCurrent );
YCurrent --;
}
XCurrent ++;
}
}
}
/******************************************************************************
function: Show English characters
parameter:
Xpoint :X coordinate
Ypoint :Y coordinate
Acsii_Char :To display the English characters
Font :A structure pointer that displays a character size
Color_Foreground : Select the foreground color
Color_Background : Select the background color
******************************************************************************/
void Paint_DrawChar(UWORD Xpoint, UWORD Ypoint, const char Acsii_Char,
sFONT* Font, UWORD Color_Foreground, UWORD Color_Background)
{
UWORD Page, Column;
if (Xpoint > Paint.Width || Ypoint > Paint.Height) {
Debug("Paint_DrawChar Input exceeds the normal display range\r\n");
return;
}
uint32_t Char_Offset = (Acsii_Char - ' ') * Font->Height * (Font->Width / 8 + (Font->Width % 8 ? 1 : 0));
const unsigned char *ptr = &Font->table[Char_Offset];
for (Page = 0; Page < Font->Height; Page ++ ) {
for (Column = 0; Column < Font->Width; Column ++ ) {
//To determine whether the font background color and screen background color is consistent
if (FONT_BACKGROUND == Color_Background) { //this process is to speed up the scan
if (*ptr & (0x80 >> (Column % 8)))
Paint_SetPixel(Xpoint + Column, Ypoint + Page, Color_Foreground);
// Paint_DrawPoint(Xpoint + Column, Ypoint + Page, Color_Foreground, DOT_PIXEL_DFT, DOT_STYLE_DFT);
} else {
if (*ptr & (0x80 >> (Column % 8))) {
Paint_SetPixel(Xpoint + Column, Ypoint + Page, Color_Foreground);
// Paint_DrawPoint(Xpoint + Column, Ypoint + Page, Color_Foreground, DOT_PIXEL_DFT, DOT_STYLE_DFT);
} else {
Paint_SetPixel(Xpoint + Column, Ypoint + Page, Color_Background);
// Paint_DrawPoint(Xpoint + Column, Ypoint + Page, Color_Background, DOT_PIXEL_DFT, DOT_STYLE_DFT);
}
}
//One pixel is 8 bits
if (Column % 8 == 7)
ptr++;
}// Write a line
if (Font->Width % 8 != 0)
ptr++;
}// Write all
}
/******************************************************************************
function: Display the string
parameter:
Xstart :X coordinate
Ystart :Y coordinate
pString :The first address of the English string to be displayed
Font :A structure pointer that displays a character size
Color_Foreground : Select the foreground color
Color_Background : Select the background color
******************************************************************************/
void Paint_DrawString_EN(UWORD Xstart, UWORD Ystart, const char * pString,
sFONT* Font, UWORD Color_Foreground, UWORD Color_Background)
{
UWORD Xpoint = Xstart;
UWORD Ypoint = Ystart;
if (Xstart > Paint.Width || Ystart > Paint.Height) {
Debug("Paint_DrawString_EN Input exceeds the normal display range\r\n");
return;
}
while (* pString != '\0') {
//if X direction filled , reposition to(Xstart,Ypoint),Ypoint is Y direction plus the Height of the character
if ((Xpoint + Font->Width ) > Paint.Width ) {
Xpoint = Xstart;
Ypoint += Font->Height;
}
// If the Y direction is full, reposition to(Xstart, Ystart)
if ((Ypoint + Font->Height ) > Paint.Height ) {
Xpoint = Xstart;
Ypoint = Ystart;
}
Paint_DrawChar(Xpoint, Ypoint, * pString, Font, Color_Background, Color_Foreground);
//The next character of the address
pString ++;
//The next word of the abscissa increases the font of the broadband
Xpoint += Font->Width;
}
}
/******************************************************************************
function: Display the string
parameter:
Xstart :X coordinate
Ystart :Y coordinate
pString :The first address of the Chinese string and English
string to be displayed
Font :A structure pointer that displays a character size
Color_Foreground : Select the foreground color
Color_Background : Select the background color
******************************************************************************/
void Paint_DrawString_CN(UWORD Xstart, UWORD Ystart, const char * pString, cFONT* font,
UWORD Color_Foreground, UWORD Color_Background)
{
const char* p_text = pString;
int x = Xstart, y = Ystart;
int i, j,Num;
/* Send the string character by character on EPD */
while (*p_text != 0) {
if(*p_text <= 0x7F) { //ASCII < 126
for(Num = 0; Num < font->size; Num++) {
if(*p_text== font->table[Num].index[0]) {
const char* ptr = &font->table[Num].matrix[0];
for (j = 0; j < font->Height; j++) {
for (i = 0; i < font->Width; i++) {
if (FONT_BACKGROUND == Color_Background) { //this process is to speed up the scan
if (*ptr & (0x80 >> (i % 8))) {
Paint_SetPixel(x + i, y + j, Color_Foreground);
// Paint_DrawPoint(x + i, y + j, Color_Foreground, DOT_PIXEL_DFT, DOT_STYLE_DFT);
}
} else {
if (*ptr & (0x80 >> (i % 8))) {
Paint_SetPixel(x + i, y + j, Color_Foreground);
// Paint_DrawPoint(x + i, y + j, Color_Foreground, DOT_PIXEL_DFT, DOT_STYLE_DFT);
} else {
Paint_SetPixel(x + i, y + j, Color_Background);
// Paint_DrawPoint(x + i, y + j, Color_Background, DOT_PIXEL_DFT, DOT_STYLE_DFT);
}
}
if (i % 8 == 7) {
ptr++;
}
}
if (font->Width % 8 != 0) {
ptr++;
}
}
break;
}
}
/* Point on the next character */
p_text += 1;
/* Decrement the column position by 16 */
x += font->ASCII_Width;
} else { //Chinese
for(Num = 0; Num < font->size; Num++) {
if((*p_text== font->table[Num].index[0]) && (*(p_text+1) == font->table[Num].index[1])) {
const char* ptr = &font->table[Num].matrix[0];
for (j = 0; j < font->Height; j++) {
for (i = 0; i < font->Width; i++) {
if (FONT_BACKGROUND == Color_Background) { //this process is to speed up the scan
if (*ptr & (0x80 >> (i % 8))) {
Paint_SetPixel(x + i, y + j, Color_Foreground);
// Paint_DrawPoint(x + i, y + j, Color_Foreground, DOT_PIXEL_DFT, DOT_STYLE_DFT);
}
} else {
if (*ptr & (0x80 >> (i % 8))) {
Paint_SetPixel(x + i, y + j, Color_Foreground);
// Paint_DrawPoint(x + i, y + j, Color_Foreground, DOT_PIXEL_DFT, DOT_STYLE_DFT);
} else {
Paint_SetPixel(x + i, y + j, Color_Background);
// Paint_DrawPoint(x + i, y + j, Color_Background, DOT_PIXEL_DFT, DOT_STYLE_DFT);
}
}
if (i % 8 == 7) {
ptr++;
}
}
if (font->Width % 8 != 0) {
ptr++;
}
}
break;
}
}
/* Point on the next character */
p_text += 2;
/* Decrement the column position by 16 */
x += font->Width;
}
}
}
/******************************************************************************
function: Display nummber
parameter:
Xstart :X coordinate
Ystart : Y coordinate
Nummber : The number displayed
Font :A structure pointer that displays a character size
Color_Foreground : Select the foreground color
Color_Background : Select the background color
******************************************************************************/
#define ARRAY_LEN 255
void Paint_DrawNum(UWORD Xpoint, UWORD Ypoint, int32_t Nummber,
sFONT* Font, UWORD Color_Foreground, UWORD Color_Background)
{
int16_t Num_Bit = 0, Str_Bit = 0;
uint8_t Str_Array[ARRAY_LEN] = {0}, Num_Array[ARRAY_LEN] = {0};
uint8_t *pStr = Str_Array;
if (Xpoint > Paint.Width || Ypoint > Paint.Height) {
Debug("Paint_DisNum Input exceeds the normal display range\r\n");
return;
}
//Converts a number to a string
while (Nummber) {
Num_Array[Num_Bit] = Nummber % 10 + '0';
Num_Bit++;
Nummber /= 10;
}
//The string is inverted
while (Num_Bit > 0) {
Str_Array[Str_Bit] = Num_Array[Num_Bit - 1];
Str_Bit ++;
Num_Bit --;
}
//show
Paint_DrawString_EN(Xpoint, Ypoint, (const char*)pStr, Font, Color_Background, Color_Foreground);
}
/******************************************************************************
function: Display time
parameter:
Xstart :X coordinate
Ystart : Y coordinate
pTime : Time-related structures
Font :A structure pointer that displays a character size
Color_Foreground : Select the foreground color
Color_Background : Select the background color
******************************************************************************/
void Paint_DrawTime(UWORD Xstart, UWORD Ystart, PAINT_TIME *pTime, sFONT* Font,
UWORD Color_Foreground, UWORD Color_Background)
{
uint8_t value[10] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9'};
UWORD Dx = Font->Width;
//Write data into the cache
Paint_DrawChar(Xstart , Ystart, value[pTime->Hour / 10], Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx , Ystart, value[pTime->Hour % 10], Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx + Dx / 4 + Dx / 2 , Ystart, ':' , Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx * 2 + Dx / 2 , Ystart, value[pTime->Min / 10] , Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx * 3 + Dx / 2 , Ystart, value[pTime->Min % 10] , Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx * 4 + Dx / 2 - Dx / 4, Ystart, ':' , Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx * 5 , Ystart, value[pTime->Sec / 10] , Font, Color_Background, Color_Foreground);
Paint_DrawChar(Xstart + Dx * 6 , Ystart, value[pTime->Sec % 10] , Font, Color_Background, Color_Foreground);
}
/******************************************************************************
function: Display monochrome bitmap
parameter:
image_buffer :A picture data converted to a bitmap
info:
Use a computer to convert the image into a corresponding array,
and then embed the array directly into Imagedata.cpp as a .c file.
******************************************************************************/
void Paint_DrawBitMap(const unsigned char* image_buffer)
{
UWORD x, y;
UDOUBLE Addr = 0;
for (y = 0; y < Paint.HeightByte; y++) {
for (x = 0; x < Paint.WidthByte; x++) {//8 pixel = 1 byte
Addr = x + y * Paint.WidthByte;
Paint.Image[Addr] = (unsigned char)image_buffer[Addr];
}
}
}
+215
View File
@@ -0,0 +1,215 @@
/******************************************************************************
* | File : GUI_Paint.h
* | Author : Waveshare electronics
* | Function : Achieve drawing: draw points, lines, boxes, circles and
* their size, solid dotted line, solid rectangle hollow
* rectangle, solid circle hollow circle.
* | Info :
* Achieve display characters: Display a single character, string, number
* Achieve time display: adaptive size display time minutes and seconds
*----------------
* | This version: V3.1
* | Date : 2019-10-10
* | Info :
* -----------------------------------------------------------------------------
* V3.1(2019-10-10):
* 1. Add gray level
* PAINT Add Scale
* 2. Add void Paint_SetScale(UBYTE scale);
*
* V3.0(2019-04-18):
* 1.Change:
* Paint_DrawPoint(..., DOT_STYLE DOT_STYLE)
* => Paint_DrawPoint(..., DOT_STYLE Dot_Style)
* Paint_DrawLine(..., LINE_STYLE Line_Style, DOT_PIXEL Dot_Pixel)
* => Paint_DrawLine(..., DOT_PIXEL Line_width, LINE_STYLE Line_Style)
* Paint_DrawRectangle(..., DRAW_FILL Filled, DOT_PIXEL Dot_Pixel)
* => Paint_DrawRectangle(..., DOT_PIXEL Line_width, DRAW_FILL Draw_Fill)
* Paint_DrawCircle(..., DRAW_FILL Draw_Fill, DOT_PIXEL Dot_Pixel)
* => Paint_DrawCircle(..., DOT_PIXEL Line_width, DRAW_FILL Draw_Filll)
*
* -----------------------------------------------------------------------------
* V2.0(2018-11-15):
* 1.add: Paint_NewImage()
* Create an image's properties
* 2.add: Paint_SelectImage()
* Select the picture to be drawn
* 3.add: Paint_SetRotate()
* Set the direction of the cache
* 4.add: Paint_RotateImage()
* Can flip the picture, Support 0-360 degrees,
* but only 90.180.270 rotation is better
* 4.add: Paint_SetMirroring()
* Can Mirroring the picture, horizontal, vertical, origin
* 5.add: Paint_DrawString_CN()
* Can display Chinese(GB1312)
*
* -----------------------------------------------------------------------------
* V1.0(2018-07-17):
* Create library
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documnetation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
******************************************************************************/
#ifndef __GUI_PAINT_H
#define __GUI_PAINT_H
#include "DEV_Config.h"
#include "../Fonts/fonts.h"
/**
* Image attributes
**/
typedef struct {
UBYTE *Image;
UWORD Width;
UWORD Height;
UWORD WidthMemory;
UWORD HeightMemory;
UWORD Color;
UWORD Rotate;
UWORD Mirror;
UWORD WidthByte;
UWORD HeightByte;
UWORD Scale;
} PAINT;
extern PAINT Paint;
/**
* Display rotate
**/
#define ROTATE_0 0
#define ROTATE_90 90
#define ROTATE_180 180
#define ROTATE_270 270
/**
* Display Flip
**/
typedef enum {
MIRROR_NONE = 0x00,
MIRROR_HORIZONTAL = 0x01,
MIRROR_VERTICAL = 0x02,
MIRROR_ORIGIN = 0x03,
} MIRROR_IMAGE;
#define MIRROR_IMAGE_DFT MIRROR_NONE
/**
* image color
**/
#define WHITE 0xFF
#define BLACK 0x00
#define RED BLACK
#define IMAGE_BACKGROUND WHITE
#define FONT_FOREGROUND BLACK
#define FONT_BACKGROUND WHITE
//4 Gray level
#define GRAY1 0x03 //Blackest
#define GRAY2 0x02
#define GRAY3 0x01 //gray
#define GRAY4 0x00 //white
/**
* The size of the point
**/
typedef enum {
DOT_PIXEL_1X1 = 1, // 1 x 1
DOT_PIXEL_2X2 , // 2 X 2
DOT_PIXEL_3X3 , // 3 X 3
DOT_PIXEL_4X4 , // 4 X 4
DOT_PIXEL_5X5 , // 5 X 5
DOT_PIXEL_6X6 , // 6 X 6
DOT_PIXEL_7X7 , // 7 X 7
DOT_PIXEL_8X8 , // 8 X 8
} DOT_PIXEL;
#define DOT_PIXEL_DFT DOT_PIXEL_1X1 //Default dot pilex
/**
* Point size fill style
**/
typedef enum {
DOT_FILL_AROUND = 1, // dot pixel 1 x 1
DOT_FILL_RIGHTUP , // dot pixel 2 X 2
} DOT_STYLE;
#define DOT_STYLE_DFT DOT_FILL_AROUND //Default dot pilex
/**
* Line style, solid or dashed
**/
typedef enum {
LINE_STYLE_SOLID = 0,
LINE_STYLE_DOTTED,
} LINE_STYLE;
/**
* Whether the graphic is filled
**/
typedef enum {
DRAW_FILL_EMPTY = 0,
DRAW_FILL_FULL,
} DRAW_FILL;
/**
* Custom structure of a time attribute
**/
typedef struct {
UWORD Year; //0000
UBYTE Month; //1 - 12
UBYTE Day; //1 - 30
UBYTE Hour; //0 - 23
UBYTE Min; //0 - 59
UBYTE Sec; //0 - 59
} PAINT_TIME;
extern PAINT_TIME sPaint_time;
//init and Clear
void Paint_NewImage(UBYTE *image, UWORD Width, UWORD Height, UWORD Rotate, UWORD Color);
void Paint_SelectImage(UBYTE *image);
void Paint_SetRotate(UWORD Rotate);
void Paint_SetMirroring(UBYTE mirror);
void Paint_SetPixel(UWORD Xpoint, UWORD Ypoint, UWORD Color);
void Paint_SetScale(UBYTE scale);
void Paint_Clear(UWORD Color);
void Paint_ClearWindows(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend, UWORD Color);
//Drawing
void Paint_DrawPoint(UWORD Xpoint, UWORD Ypoint, UWORD Color, DOT_PIXEL Dot_Pixel, DOT_STYLE Dot_FillWay);
void Paint_DrawLine(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend, UWORD Color, DOT_PIXEL Line_width, LINE_STYLE Line_Style);
void Paint_DrawRectangle(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend, UWORD Color, DOT_PIXEL Line_width, DRAW_FILL Draw_Fill);
void Paint_DrawCircle(UWORD X_Center, UWORD Y_Center, UWORD Radius, UWORD Color, DOT_PIXEL Line_width, DRAW_FILL Draw_Fill);
//Display string
void Paint_DrawChar(UWORD Xstart, UWORD Ystart, const char Acsii_Char, sFONT* Font, UWORD Color_Foreground, UWORD Color_Background);
void Paint_DrawString_EN(UWORD Xstart, UWORD Ystart, const char * pString, sFONT* Font, UWORD Color_Foreground, UWORD Color_Background);
void Paint_DrawString_CN(UWORD Xstart, UWORD Ystart, const char * pString, cFONT* font, UWORD Color_Foreground, UWORD Color_Background);
void Paint_DrawNum(UWORD Xpoint, UWORD Ypoint, int32_t Nummber, sFONT* Font, UWORD Color_Foreground, UWORD Color_Background);
void Paint_DrawTime(UWORD Xstart, UWORD Ystart, PAINT_TIME *pTime, sFONT* Font, UWORD Color_Foreground, UWORD Color_Background);
//pic
void Paint_DrawBitMap(const unsigned char* image_buffer);
#endif
File diff suppressed because it is too large. Load diff
+83
View File
@@ -0,0 +1,83 @@
/*****************************************************************************
* | File : ImageData.h
* | Author : Waveshare team
* | Function :
*----------------
* | This version: V1.0
* | Date : 2018-10-23
* | Info :
*
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#ifndef _IMAGEDATA_H_
#define _IMAGEDATA_H_
extern const unsigned char flagimage[];
extern const unsigned char gImage_2in13_2[];
extern const unsigned char gImage_2in9[];
extern const unsigned char gImage_2in9_4gray[];
extern const unsigned char gImage_2in9bc_b[];
extern const unsigned char gImage_2in9bc_ry[];
extern const unsigned char gImage_2in13[];
extern const unsigned char gImage_2in13b_V4b[];
extern const unsigned char gImage_2in13b_V4r[];
extern const unsigned char gImage_2in13b_b[];
extern const unsigned char gImage_2in13b_r[];
extern const unsigned char gImage_2in13c_b[];
extern const unsigned char gImage_2in13c_y[];
extern const unsigned char gImage_2in13d[];
extern const unsigned char gImage_2in66[];
extern const unsigned char gImage_2in66br[];
extern const unsigned char gImage_2in66bb[];
extern const unsigned char gImage_2in7[];
extern const unsigned char gImage_2in7b_Black[5808];
extern const unsigned char gImage_2in7b_Red[5808];
extern const unsigned char gImage_2in7b_Black_V2[5808];
extern const unsigned char gImage_2in7b_Red_V2[5808];
extern const unsigned char gImage_2in7_4Gray[];
extern const unsigned char gImage_2in7_4Gray_1[];
extern const unsigned char gImage_4in2[];
extern const unsigned char gImage_4in2_4Gray[];
extern const unsigned char gImage_4in2_4Gray1[];
extern const unsigned char gImage_4in2bc_b[];
extern const unsigned char gImage_4in2bc_ry[];
extern const unsigned char gImage_5in65f[];
extern const unsigned char gImage_5in83_V2[];
extern const unsigned char gImage_5in83b_V2_b[];
extern const unsigned char gImage_5in83b_V2_r[];
extern const unsigned char gImage_7in5_V2[];
extern const unsigned char gImage_7in5_V2_b[];
extern const unsigned char gImage_7in5_V2_ry[];
#endif
/* FILE END */
+47
View File
@@ -0,0 +1,47 @@
/*****************************************************************************
* | File : Debug.h
* | Author : Waveshare team
* | Function : debug with printf
* | Info :
* Image scanning
* Please use progressive scanning to generate images or fonts
*----------------
* | This version: V2.0
* | Date : 2018-10-30
* | Info :
* 1.USE_DEBUG -> DEBUG, If you need to see the debug information,
* clear the execution: make DEBUG=-DDEBUG
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#ifndef __DEBUG_H
#define __DEBUG_H
#include <stdio.h>
#if DEBUG
#define Debug(__info,...) printf("Debug: " __info,##__VA_ARGS__)
#else
#define Debug(__info,...)
#endif
#endif
+564
View File
@@ -0,0 +1,564 @@
/*****************************************************************************
* | File : EPD_4in2_V2.h
* | Author : Waveshare team
* | Function : 4.2inch e-paper V2
* | Info :
*----------------
* | This version: V1.0
* | Date : 2023-09-12
* | Info :
* -----------------------------------------------------------------------------
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#include "EPD_4in2_V2.h"
#include "Debug.h"
const unsigned char LUT_ALL[233]={
0x01, 0x0A, 0x1B, 0x0F, 0x03, 0x01, 0x01,
0x05, 0x0A, 0x01, 0x0A, 0x01, 0x01, 0x01,
0x05, 0x08, 0x03, 0x02, 0x04, 0x01, 0x01,
0x01, 0x04, 0x04, 0x02, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x0A, 0x1B, 0x0F, 0x03, 0x01, 0x01,
0x05, 0x4A, 0x01, 0x8A, 0x01, 0x01, 0x01,
0x05, 0x48, 0x03, 0x82, 0x84, 0x01, 0x01,
0x01, 0x84, 0x84, 0x82, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x0A, 0x1B, 0x8F, 0x03, 0x01, 0x01,
0x05, 0x4A, 0x01, 0x8A, 0x01, 0x01, 0x01,
0x05, 0x48, 0x83, 0x82, 0x04, 0x01, 0x01,
0x01, 0x04, 0x04, 0x02, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x8A, 0x1B, 0x8F, 0x03, 0x01, 0x01,
0x05, 0x4A, 0x01, 0x8A, 0x01, 0x01, 0x01,
0x05, 0x48, 0x83, 0x02, 0x04, 0x01, 0x01,
0x01, 0x04, 0x04, 0x02, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x8A, 0x9B, 0x8F, 0x03, 0x01, 0x01,
0x05, 0x4A, 0x01, 0x8A, 0x01, 0x01, 0x01,
0x05, 0x48, 0x03, 0x42, 0x04, 0x01, 0x01,
0x01, 0x04, 0x04, 0x42, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x00, 0x00, 0x07, 0x17, 0x41, 0xA8,
0x32, 0x30,
};
/******************************************************************************
function : Software reset
parameter:
******************************************************************************/
static void EPD_4IN2_V2_Reset(void)
{
DEV_Digital_Write(EPD_RST_PIN, 1);
DEV_Delay_ms(100);
DEV_Digital_Write(EPD_RST_PIN, 0);
DEV_Delay_ms(2);
DEV_Digital_Write(EPD_RST_PIN, 1);
DEV_Delay_ms(100);
}
/******************************************************************************
function : send command
parameter:
Reg : Command register
******************************************************************************/
static void EPD_4IN2_V2_SendCommand(UBYTE Reg)
{
DEV_Digital_Write(EPD_DC_PIN, 0);
DEV_Digital_Write(EPD_CS_PIN, 0);
DEV_SPI_WriteByte(Reg);
DEV_Digital_Write(EPD_CS_PIN, 1);
}
/******************************************************************************
function : send data
parameter:
Data : Write data
******************************************************************************/
static void EPD_4IN2_V2_SendData(UBYTE Data)
{
DEV_Digital_Write(EPD_DC_PIN, 1);
DEV_Digital_Write(EPD_CS_PIN, 0);
DEV_SPI_WriteByte(Data);
DEV_Digital_Write(EPD_CS_PIN, 1);
}
/******************************************************************************
function : Wait until the busy_pin goes LOW
parameter:
******************************************************************************/
void EPD_4IN2_V2_ReadBusy(void)
{
Debug("e-Paper busy\r\n");
while(DEV_Digital_Read(EPD_BUSY_PIN) == 1) { //LOW: idle, HIGH: busy
DEV_Delay_ms(10);
}
Debug("e-Paper busy release\r\n");
}
/******************************************************************************
function : Turn On Display
parameter:
******************************************************************************/
static void EPD_4IN2_V2_TurnOnDisplay(void)
{
EPD_4IN2_V2_SendCommand(0x22);
EPD_4IN2_V2_SendData(0xF7);
EPD_4IN2_V2_SendCommand(0x20);
EPD_4IN2_V2_ReadBusy();
}
static void EPD_4IN2_V2_TurnOnDisplay_Fast(void)
{
EPD_4IN2_V2_SendCommand(0x22);
EPD_4IN2_V2_SendData(0xC7);
EPD_4IN2_V2_SendCommand(0x20);
EPD_4IN2_V2_ReadBusy();
}
static void EPD_4IN2_V2_TurnOnDisplay_Partial(void)
{
EPD_4IN2_V2_SendCommand(0x22);
EPD_4IN2_V2_SendData(0xFF);
EPD_4IN2_V2_SendCommand(0x20);
EPD_4IN2_V2_ReadBusy();
}
static void EPD_4IN2_V2_TurnOnDisplay_4Gray(void)
{
EPD_4IN2_V2_SendCommand(0x22);
EPD_4IN2_V2_SendData(0xCF);
EPD_4IN2_V2_SendCommand(0x20);
EPD_4IN2_V2_ReadBusy();
}
/******************************************************************************
function : Setting the display window
parameter:
******************************************************************************/
static void EPD_4IN2_V2_SetWindows(UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend)
{
EPD_4IN2_V2_SendCommand(0x44); // SET_RAM_X_ADDRESS_START_END_POSITION
EPD_4IN2_V2_SendData((Xstart>>3) & 0xFF);
EPD_4IN2_V2_SendData((Xend>>3) & 0xFF);
EPD_4IN2_V2_SendCommand(0x45); // SET_RAM_Y_ADDRESS_START_END_POSITION
EPD_4IN2_V2_SendData(Ystart & 0xFF);
EPD_4IN2_V2_SendData((Ystart >> 8) & 0xFF);
EPD_4IN2_V2_SendData(Yend & 0xFF);
EPD_4IN2_V2_SendData((Yend >> 8) & 0xFF);
}
/******************************************************************************
function : Set Cursor
parameter:
******************************************************************************/
static void EPD_4IN2_V2_SetCursor(UWORD Xstart, UWORD Ystart)
{
EPD_4IN2_V2_SendCommand(0x4E); // SET_RAM_X_ADDRESS_COUNTER
EPD_4IN2_V2_SendData(Xstart & 0xFF);
EPD_4IN2_V2_SendCommand(0x4F); // SET_RAM_Y_ADDRESS_COUNTER
EPD_4IN2_V2_SendData(Ystart & 0xFF);
EPD_4IN2_V2_SendData((Ystart >> 8) & 0xFF);
}
//LUT download
static void EPD_4IN2_V2_4Gray_lut(void)
{
unsigned char i;
//WS byte 0~152, the content of VS[nX-LUTm], TP[nX], RP[n], SR[nXY], FR[n] and XON[nXY]
EPD_4IN2_V2_SendCommand(0x32);
for(i=0;i<227;i++)
{
EPD_4IN2_V2_SendData(LUT_ALL[i]);
}
//WS byte 153, the content of Option for LUT end
EPD_4IN2_V2_SendCommand(0x3F);
EPD_4IN2_V2_SendData(LUT_ALL[i++]);
//WS byte 154, the content of gate leve
EPD_4IN2_V2_SendCommand(0x03);
EPD_4IN2_V2_SendData(LUT_ALL[i++]);//VGH
//WS byte 155~157, the content of source level
EPD_4IN2_V2_SendCommand(0x04);
EPD_4IN2_V2_SendData(LUT_ALL[i++]);//VSH1
EPD_4IN2_V2_SendData(LUT_ALL[i++]);//VSH2
EPD_4IN2_V2_SendData(LUT_ALL[i++]);//VSL
//WS byte 158, the content of VCOM level
EPD_4IN2_V2_SendCommand(0x2c);
EPD_4IN2_V2_SendData(LUT_ALL[i++]);//VCOM
}
/******************************************************************************
function : Initialize the e-Paper register
parameter:
******************************************************************************/
void EPD_4IN2_V2_Init(void)
{
EPD_4IN2_V2_Reset();
EPD_4IN2_V2_ReadBusy();
EPD_4IN2_V2_SendCommand(0x12); // soft reset
EPD_4IN2_V2_ReadBusy();
EPD_4IN2_V2_SendCommand(0x21); // Display update control
EPD_4IN2_V2_SendData(0x40);
EPD_4IN2_V2_SendData(0x00);
EPD_4IN2_V2_SendCommand(0x3C); //BorderWavefrom
EPD_4IN2_V2_SendData(0x05);
EPD_4IN2_V2_SendCommand(0x11); // data entry mode
EPD_4IN2_V2_SendData(0x03); // X-mode
EPD_4IN2_V2_SetWindows(0, 0, EPD_4IN2_V2_WIDTH-1, EPD_4IN2_V2_HEIGHT-1);
EPD_4IN2_V2_SetCursor(0, 0);
EPD_4IN2_V2_ReadBusy();
}
/******************************************************************************
function : Initialize Fast the e-Paper register
parameter:
******************************************************************************/
void EPD_4IN2_V2_Init_Fast(UBYTE Mode)
{
EPD_4IN2_V2_Reset();
EPD_4IN2_V2_ReadBusy();
EPD_4IN2_V2_SendCommand(0x12); // soft reset
EPD_4IN2_V2_ReadBusy();
EPD_4IN2_V2_SendCommand(0x21);
EPD_4IN2_V2_SendData(0x40);
EPD_4IN2_V2_SendData(0x00);
EPD_4IN2_V2_SendCommand(0x3C);
EPD_4IN2_V2_SendData(0x05);
if(Mode == Seconds_1_5S)
{
//1.5s
EPD_4IN2_V2_SendCommand(0x1A); // Write to temperature register
EPD_4IN2_V2_SendData(0x6E);
}
else if(Mode == Seconds_1S)
{
//1s
EPD_4IN2_V2_SendCommand(0x1A); // Write to temperature register
EPD_4IN2_V2_SendData(0x5A);
}
EPD_4IN2_V2_SendCommand(0x22); // Load temperature value
EPD_4IN2_V2_SendData(0x91);
EPD_4IN2_V2_SendCommand(0x20);
EPD_4IN2_V2_ReadBusy();
EPD_4IN2_V2_SendCommand(0x11); // data entry mode
EPD_4IN2_V2_SendData(0x03); // X-mode
EPD_4IN2_V2_SetWindows(0, 0, EPD_4IN2_V2_WIDTH-1, EPD_4IN2_V2_HEIGHT-1);
EPD_4IN2_V2_SetCursor(0, 0);
EPD_4IN2_V2_ReadBusy();
}
void EPD_4IN2_V2_Init_4Gray(void)
{
EPD_4IN2_V2_Reset();
EPD_4IN2_V2_SendCommand(0x12); //SWRESET
EPD_4IN2_V2_ReadBusy();
EPD_4IN2_V2_SendCommand(0x21);
EPD_4IN2_V2_SendData(0x00);
EPD_4IN2_V2_SendData(0x00);
EPD_4IN2_V2_SendCommand(0x3C);
EPD_4IN2_V2_SendData(0x03);
EPD_4IN2_V2_SendCommand(0x0C); //BTST
EPD_4IN2_V2_SendData(0x8B);//8B
EPD_4IN2_V2_SendData(0x9C);//9C
EPD_4IN2_V2_SendData(0xA4);//96 A4
EPD_4IN2_V2_SendData(0x0F);//0F
EPD_4IN2_V2_4Gray_lut(); //LUT
EPD_4IN2_V2_SendCommand(0x11); // data entry mode
EPD_4IN2_V2_SendData(0x03); // X-mode
EPD_4IN2_V2_SetWindows(0, 0, EPD_4IN2_V2_WIDTH-1, EPD_4IN2_V2_HEIGHT-1);
EPD_4IN2_V2_SetCursor(0, 0);
}
/******************************************************************************
function : Clear screen
parameter:
******************************************************************************/
void EPD_4IN2_V2_Clear(void)
{
UWORD Width, Height;
Width = (EPD_4IN2_V2_WIDTH % 8 == 0)? (EPD_4IN2_V2_WIDTH / 8 ): (EPD_4IN2_V2_WIDTH / 8 + 1);
Height = EPD_4IN2_V2_HEIGHT;
EPD_4IN2_V2_SendCommand(0x24);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
EPD_4IN2_V2_SendData(0xFF);
}
}
EPD_4IN2_V2_SendCommand(0x26);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
EPD_4IN2_V2_SendData(0xFF);
}
}
EPD_4IN2_V2_TurnOnDisplay();
}
/******************************************************************************
function : Sends the image buffer in RAM to e-Paper and displays
parameter:
******************************************************************************/
void EPD_4IN2_V2_Display(UBYTE *Image)
{
UWORD Width, Height;
Width = (EPD_4IN2_V2_WIDTH % 8 == 0)? (EPD_4IN2_V2_WIDTH / 8 ): (EPD_4IN2_V2_WIDTH / 8 + 1);
Height = EPD_4IN2_V2_HEIGHT;
EPD_4IN2_V2_SendCommand(0x24);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
EPD_4IN2_V2_SendData(Image[i + j * Width]);
}
}
EPD_4IN2_V2_SendCommand(0x26);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
EPD_4IN2_V2_SendData(Image[i + j * Width]);
}
}
EPD_4IN2_V2_TurnOnDisplay();
}
/******************************************************************************
function : Sends the image buffer in RAM to e-Paper and fast displays
parameter:
******************************************************************************/
void EPD_4IN2_V2_Display_Fast(UBYTE *Image)
{
UWORD Width, Height;
Width = (EPD_4IN2_V2_WIDTH % 8 == 0)? (EPD_4IN2_V2_WIDTH / 8 ): (EPD_4IN2_V2_WIDTH / 8 + 1);
Height = EPD_4IN2_V2_HEIGHT;
EPD_4IN2_V2_SendCommand(0x24);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
EPD_4IN2_V2_SendData(Image[i + j * Width]);
}
}
EPD_4IN2_V2_SendCommand(0x26);
for (UWORD j = 0; j < Height; j++) {
for (UWORD i = 0; i < Width; i++) {
EPD_4IN2_V2_SendData(Image[i + j * Width]);
}
}
EPD_4IN2_V2_TurnOnDisplay_Fast();
}
void EPD_4IN2_V2_Display_4Gray(UBYTE *Image)
{
UDOUBLE i,j,k,m;
UBYTE temp1,temp2,temp3;
/****Color display description****
white gray2 gray1 black
0x10| 01 01 00 00
0x13| 01 00 01 00
*********************************/
EPD_4IN2_V2_SendCommand(0x24);
// EPD_4IN2_HEIGHT
// EPD_4IN2_WIDTH
for(m = 0; m<EPD_4IN2_V2_HEIGHT;m++)
for(i=0;i<EPD_4IN2_V2_WIDTH/8;i++)
{
temp3=0;
for(j=0;j<2;j++)
{
temp1 = Image[(m*(EPD_4IN2_V2_WIDTH/8)+i)*2+j];
for(k=0;k<2;k++)
{
temp2 = temp1&0xC0 ;
if(temp2 == 0xC0)
temp3 |= 0x01;//white
else if(temp2 == 0x00)
temp3 |= 0x00; //black
else if(temp2 == 0x80)
temp3 |= 0x00; //gray1
else //0x40
temp3 |= 0x01; //gray2
temp3 <<= 1;
temp1 <<= 2;
temp2 = temp1&0xC0 ;
if(temp2 == 0xC0) //white
temp3 |= 0x01;
else if(temp2 == 0x00) //black
temp3 |= 0x00;
else if(temp2 == 0x80)
temp3 |= 0x00; //gray1
else //0x40
temp3 |= 0x01; //gray2
if(j!=1 || k!=1)
temp3 <<= 1;
temp1 <<= 2;
}
}
EPD_4IN2_V2_SendData(temp3);
}
// new data
EPD_4IN2_V2_SendCommand(0x26);
for(m = 0; m<EPD_4IN2_V2_HEIGHT;m++)
for(i=0;i<EPD_4IN2_V2_WIDTH/8;i++)
{
temp3=0;
for(j=0;j<2;j++)
{
temp1 = Image[(m*(EPD_4IN2_V2_WIDTH/8)+i)*2+j];
for(k=0;k<2;k++)
{
temp2 = temp1&0xC0 ;
if(temp2 == 0xC0)
temp3 |= 0x01;//white
else if(temp2 == 0x00)
temp3 |= 0x00; //black
else if(temp2 == 0x80)
temp3 |= 0x01; //gray1
else //0x40
temp3 |= 0x00; //gray2
temp3 <<= 1;
temp1 <<= 2;
temp2 = temp1&0xC0 ;
if(temp2 == 0xC0) //white
temp3 |= 0x01;
else if(temp2 == 0x00) //black
temp3 |= 0x00;
else if(temp2 == 0x80)
temp3 |= 0x01; //gray1
else //0x40
temp3 |= 0x00; //gray2
if(j!=1 || k!=1)
temp3 <<= 1;
temp1 <<= 2;
}
}
EPD_4IN2_V2_SendData(temp3);
}
EPD_4IN2_V2_TurnOnDisplay_4Gray();
}
// Send partial data for partial refresh
void EPD_4IN2_V2_PartialDisplay(UBYTE *Image, UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend)
{
if((Xstart % 8 + Xend % 8 == 8 && Xstart % 8 > Xend % 8) || Xstart % 8 + Xend % 8 == 0 || (Xend - Xstart)%8 == 0)
{
Xstart = Xstart / 8 ;
Xend = Xend / 8;
}
else
{
Xstart = Xstart / 8 ;
Xend = Xend % 8 == 0 ? Xend / 8 : Xend / 8 + 1;
}
UWORD i, Width;
Width = Xend - Xstart;
UWORD IMAGE_COUNTER = Width * (Yend-Ystart);
Xend -= 1;
Yend -= 1;
EPD_4IN2_V2_SendCommand(0x3C); //BorderWavefrom,
EPD_4IN2_V2_SendData(0x80);
EPD_4IN2_V2_SendCommand(0x21);
EPD_4IN2_V2_SendData(0x00);
EPD_4IN2_V2_SendData(0x00);
EPD_4IN2_V2_SendCommand(0x3C);
EPD_4IN2_V2_SendData(0x80);
EPD_4IN2_V2_SendCommand(0x44); // set RAM x address start/end, in page 35
EPD_4IN2_V2_SendData(Xstart & 0xff); // RAM x address start at 00h;
EPD_4IN2_V2_SendData(Xend & 0xff); // RAM x address end at 0fh(15+1)*8->128
EPD_4IN2_V2_SendCommand(0x45); // set RAM y address start/end, in page 35
EPD_4IN2_V2_SendData(Ystart & 0xff); // RAM y address start at 0127h;
EPD_4IN2_V2_SendData((Ystart>>8) & 0x01); // RAM y address start at 0127h;
EPD_4IN2_V2_SendData(Yend & 0xff); // RAM y address end at 00h;
EPD_4IN2_V2_SendData((Yend>>8) & 0x01);
EPD_4IN2_V2_SendCommand(0x4E); // set RAM x address count to 0;
EPD_4IN2_V2_SendData(Xstart & 0xff);
EPD_4IN2_V2_SendCommand(0x4F); // set RAM y address count to 0X127;
EPD_4IN2_V2_SendData(Ystart & 0xff);
EPD_4IN2_V2_SendData((Ystart>>8) & 0x01);
EPD_4IN2_V2_SendCommand(0x24);
for (i = 0; i < IMAGE_COUNTER; i++) {
EPD_4IN2_V2_SendData(Image[i]);
}
EPD_4IN2_V2_TurnOnDisplay_Partial();
}
/******************************************************************************
function : Enter sleep mode
parameter:
******************************************************************************/
void EPD_4IN2_V2_Sleep(void)
{
EPD_4IN2_V2_SendCommand(0x10); // DEEP_SLEEP
EPD_4IN2_V2_SendData(0x01);
DEV_Delay_ms(200);
}
+56
View File
@@ -0,0 +1,56 @@
/*****************************************************************************
* | File : EPD_4in2_V2.h
* | Author : Waveshare team
* | Function : 4.2inch e-paper V2
* | Info :
*----------------
* | This version: V1.0
* | Date : 2023-09-12
* | Info :
* -----------------------------------------------------------------------------
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documnetation files (the "Software"), to deal
# in the Software without restriction, including without limitation the rights
# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
# copies of the Software, and to permit persons to whom the Software is
# furished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS OR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
# LIABILITY WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
# THE SOFTWARE.
#
******************************************************************************/
#ifndef _EPD_4IN2_V2_H_
#define _EPD_4IN2_V2_H_
#include "DEV_Config.h"
// Display resolution
#define EPD_4IN2_V2_WIDTH 400
#define EPD_4IN2_V2_HEIGHT 300
#define Seconds_1_5S 0
#define Seconds_1S 1
#define KEY0 15
#define KEY1 17
void EPD_4IN2_V2_Init(void);
void EPD_4IN2_V2_Init_Fast(UBYTE Mode);
void EPD_4IN2_V2_Init_4Gray(void);
void EPD_4IN2_V2_Clear(void);
void EPD_4IN2_V2_Display(UBYTE *Image);
void EPD_4IN2_V2_Display_Fast(UBYTE *Image);
void EPD_4IN2_V2_Display_4Gray(UBYTE *Image);
void EPD_4IN2_V2_PartialDisplay(UBYTE *Image, UWORD Xstart, UWORD Ystart, UWORD Xend, UWORD Yend);
void EPD_4IN2_V2_Sleep(void);
#endif
+9 -4
View File
@@ -8,8 +8,13 @@
; Please visit documentation for the other options and examples ; Please visit documentation for the other options and examples
; https://docs.platformio.org/page/projectconf.html ; https://docs.platformio.org/page/projectconf.html
[env:esp32dev] [env:pico_w]
platform = espressif32 platform = https://github.com/maxgerhardt/platform-raspberrypi.git
board = esp32dev board = rpipicow
framework = espidf framework = arduino
monitor_speed = 115200 monitor_speed = 115200
build_flags =
-I include
-DPIO_FRAMEWORK_ARDUINO_ENABLE_FREERTOS
build_src_filter = +<main.cpp>
lib_deps = bblanchon/ArduinoJson@7.4.3
-3720
View File
File diff suppressed because it is too large. Load diff
-6
View File
@@ -1,6 +0,0 @@
# This file was automatically generated for projects
# without default 'CMakeLists.txt' file.
FILE(GLOB_RECURSE app_sources ${CMAKE_SOURCE_DIR}/src/*.*)
idf_component_register(SRCS ${app_sources})
+139
View File
@@ -0,0 +1,139 @@
#include <WiFi.h>
#include <HTTPClient.h>
#include "FreeRTOS.h"
#include "task.h"
#include "secrets.h"
#include "ArduinoJson.h"
struct race_info {
char session_name[50];
char date_start[32];
char circuit_short_name[50];
uint16_t session_key;
uint16_t meeting_key;
uint16_t circuit_key;
};
extern race_info next_race;
static int get_race_query_url(char* target, size_t target_size) {
if (target == NULL) return -1;
time_t now = time(nullptr);
struct tm timeinfo, futureTime;
localtime_r(&now, &timeinfo);
futureTime = timeinfo;
futureTime.tm_mon += 2;
mktime(&futureTime);
char date_buffer[12];
char fdate_buffer[12];
Serial.print("");
strftime(date_buffer, sizeof(date_buffer), "%Y-%m-%d", &timeinfo);
Serial.printf("Current Date: %s\n", date_buffer);
strftime(fdate_buffer, sizeof(fdate_buffer), "%Y-%m-%d", &futureTime);
Serial.printf("Future Date: %s\n", fdate_buffer);
snprintf(target, target_size, "https://api.openf1.org/v1/sessions?date_start>=%s&date_start<=%s&session_type=Race",
date_buffer,
fdate_buffer);
return 0;
}
int parse_session_json() {
}
void get_next_race(void *pvParameters) {
TickType_t retryDelay = pdMS_TO_TICKS(10000);
while (true) {
if (WiFi.status() == WL_CONNECTED) {
retryDelay = pdMS_TO_TICKS(10000);
HTTPClient http;
http.setTimeout(10000);
http.setCACert(OPENF1_ROOT_CA);
char query_url[103];
get_race_query_url(query_url, sizeof(query_url));
Serial.print("");
Serial.print("Query: ");
Serial.println(query_url);
const bool requestReady = http.begin(query_url);
if (!requestReady) {
Serial.print("");
Serial.println("Failed to initialize OpenF1 request.");
} else {
const int httpResponseCode = http.GET();
if (httpResponseCode > 0) {
Stream& responseStream = http.getStream();
Serial.printf("HTTP Size: %d\n", http.getSize());
JsonDocument json;
const DeserializationError err = deserializeJson(json, responseStream);
if (err == DeserializationError::Ok) {
JsonArray sessions = json.as<JsonArray>();
if (sessions.size() != 0) {
JsonObject nextRaceJson = sessions[0];
const char* sessionName = nextRaceJson[F("session_name")];
const char* dateStart = nextRaceJson[F("date_start")];
const char* circuitName = nextRaceJson[F("circuit_short_name")];
next_race.session_key = nextRaceJson[F("session_key")];
next_race.meeting_key = nextRaceJson[F("meeting_key")];
next_race.circuit_key = nextRaceJson[F("circuit_key")];
if (sessionName != NULL) {
strlcpy(next_race.session_name, sessionName, sizeof(next_race.session_name));
}
if (dateStart != NULL) {
strlcpy(next_race.date_start, dateStart, sizeof(next_race.date_start));
}
if (circuitName != NULL) {
strlcpy(next_race.circuit_short_name, circuitName, sizeof(next_race.circuit_short_name));
}
Serial.print("");
Serial.print("Next race: ");
Serial.print(next_race.session_name);
Serial.print(" at ");
Serial.print(next_race.circuit_short_name);
Serial.print(" on ");
Serial.println(next_race.date_start);
}
} else {
Serial.print("");
Serial.print("Failed to parse JSON response: ");
Serial.println(err.c_str());
}
retryDelay = pdMS_TO_TICKS(900000);
} else {
Serial.print("");
Serial.printf(
"Error on GET: %d (%s)\r\n",
httpResponseCode,
HTTPClient::errorToString(httpResponseCode).c_str());
retryDelay = pdMS_TO_TICKS(10000);
}
}
http.end();
} else {
Serial.print("");
Serial.println("WiFi not connecteFormattedd.");
}
vTaskDelay(retryDelay);
}
}
/* Example response from the OpenF1 API for upcoming races
[{"session_key":11404,"session_type":"Race","session_name":"Race","date_start":"2026-11-01T20:00:00+00:00","date_end":"2026-11-01T22:00:00+00:00","meeting_key":1298,"circuit_key":65,"circuit_short_name":"Mexico City","country_key":8,"country_code":"MEX","country_name":"Mexico","location":"Mexico City","gmt_offset":"-06:00:00","year":2026,"is_cancelled":false},{"session_key":11412,"session_type":"Race","session_name":"Race","date_start":"2026-11-08T17:00:00+00:00","date_end":"2026-11-08T19:00:00+00:00","meeting_key":1299,"circuit_key":14,"circuit_short_name":"Interlagos","country_key":10,"country_code":"BRA","country_name":"Brazil","location":"São Paulo","gmt_offset":"-03:00:00","year":2026,"is_cancelled":false},{"session_key":11420,"session_type":"Race","session_name":"Race","date_start":"2026-11-22T04:00:00+00:00","date_end":"2026-11-22T06:00:00+00:00","meeting_key":1300,"circuit_key":152,"circuit_short_name":"Las Vegas","country_key":19,"country_code":"USA","country_name":"United States","location":"Las Vegas","gmt_offset":"-08:00:00","year":2026,"is_cancelled":false},{"session_key":11428,"session_type":"Race","session_name":"Race","date_start":"2026-11-29T16:00:00+00:00","date_end":"2026-11-29T18:00:00+00:00","meeting_key":1301,"circuit_key":150,"circuit_short_name":"Lusail","country_key":149,"country_code":"QAT","country_name":"Qatar","location":"Lusail","gmt_offset":"03:00:00","year":2026,"is_cancelled":false}]%
{"detail":"Live F1 session in progress. Global API access (including past sessions) is restricted to authenticated users until the session ends. Get an API key here: https://buy.stripe.com/eVqcN41BPekP0iIalBcEw02"}
*/
-3
View File
@@ -1,3 +0,0 @@
#define SPI_CS 11
#define SPI_MOSI 8
#define SPI_CLK 6
-60
View File
@@ -1,60 +0,0 @@
#include "config.h"
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "wifi.h"
#include "esp_sntp.h"
#include "esp_netif_sntp.h"
#define LOG_LOCAL_LEVEL ESP_LOG_VERBOSE
#include "esp_log.h"
static const char* TAG = "Main";
void print_task(void *pvParameters) {
while (1) {
ESP_LOGI(TAG, "here");
vTaskDelay(pdMS_TO_TICKS(5000));
}
}
void sync_time() {
setenv("TZ", TIMEZONE, 1);
tzset();
ESP_LOGI(TAG, "Syncing time with NTP server...");
esp_sntp_config_t config = ESP_NETIF_SNTP_DEFAULT_CONFIG("pool.ntp.org");
esp_netif_sntp_init(&config);
if (esp_netif_sntp_sync_wait(pdMS_TO_TICKS(10000)) != ESP_OK) {
ESP_LOGE(TAG, "Failed to update system time within 10s timeout");
}
struct tm timeinfo;
time_t now;
time(&now);
if (localtime_r(&now, &timeinfo) != NULL) {
ESP_LOGI(TAG, "Time synchronized: %s", asctime(&timeinfo));
} else {
ESP_LOGE(TAG, "Failed to obtain time");
}
}
void app_main() {
//Initialize NVS
esp_err_t ret = nvs_flash_init();
if (ret == ESP_ERR_NVS_NO_FREE_PAGES || ret == ESP_ERR_NVS_NEW_VERSION_FOUND) {
ESP_ERROR_CHECK(nvs_flash_erase());
ret = nvs_flash_init();
}
ESP_ERROR_CHECK(ret);
xTaskCreate(print_task, "print_task", 4096, NULL, 1, NULL);
wifi_init_sta();
vTaskDelay(pdMS_TO_TICKS(1000)); // Wait for WiFi to connect and get IP
sync_time();
vTaskDelete(NULL);
}
+146
View File
@@ -0,0 +1,146 @@
#include <stdlib.h>
#include <Arduino.h>
#include <WiFi.h>
#include <time.h>
#include "F1_api.h"
#include "FreeRTOS.h"
#include "task.h"
#include "config.h"
extern "C" {
#include "DEV_Config.h"
#include "EPD_4in2_V2.h"
#include "GUI_Paint.h"
#include "ImageData.h"
}
static UBYTE displayBuffer[(EPD_4IN2_V2_WIDTH / 8) * EPD_4IN2_V2_HEIGHT];
static constexpr UWORD COUNTER_WIDTH = 200;
static constexpr UWORD COUNTER_HEIGHT = 24;
static constexpr UWORD COUNTER_Y = 20;
static UBYTE counterBuffer[(COUNTER_WIDTH / 8) * COUNTER_HEIGHT];
static int counter = 0;
race_info next_race;
void wifi_connect() {
WiFi.setHostname(DEVICE_HOSTNAME);
Serial.println("Connecting to WiFi...");
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
for (int attempt = 0; attempt < WIFI_MAXIMUM_RETRY; ++attempt) {
const unsigned long start = millis();
while (WiFi.status() != WL_CONNECTED && millis() - start < 10000) {
delay(250);
}
if (WiFi.status() == WL_CONNECTED) {
Serial.print("Connected. IP address: ");
Serial.println(WiFi.localIP());
return;
}
if (attempt + 1 < WIFI_MAXIMUM_RETRY) {
Serial.println("WiFi connection failed; retrying...");
WiFi.disconnect();
delay(500);
WiFi.begin(WIFI_SSID, WIFI_PASSWORD);
}
}
Serial.println("Failed to connect to WiFi.");
}
void sync_time() {
if (WiFi.status() != WL_CONNECTED) {
Serial.println("Skipping NTP synchronization because WiFi is disconnected.");
return;
}
NTP.begin("pool.ntp.org", "time.nist.gov");
const bool synchronized = NTP.waitSet(10000);
setenv("TZ", TIMEZONE, 1);
tzset();
struct tm timeinfo;
const time_t now = time(nullptr);
if (synchronized && localtime_r(&now, &timeinfo) != nullptr) {
Serial.print("Time synchronized: ");
Serial.println(asctime(&timeinfo));
} else {
Serial.println("Failed to synchronize time within 10 seconds.");
}
}
bool readLocalTime(struct tm* result) {
const time_t now = time(nullptr);
return localtime_r(&now, result) != nullptr;
}
void display_loop(void *pvParameters) {
while (true) {
static unsigned long lastRefresh = 0;
static char counterStr[32];
const unsigned long elapsed = millis() - lastRefresh;
if (elapsed < 10000) {
vTaskDelay(pdMS_TO_TICKS(10000 - elapsed));
continue;
}
lastRefresh = millis();
counter++;
if (next_race.session_key == 0) {
snprintf(counterStr, sizeof(counterStr), "Counter: %d", counter);
Serial.print("");
Serial.println(counterStr);
} else {
snprintf(counterStr, sizeof(counterStr), "%s", next_race.circuit_short_name);
}
Paint_Clear(WHITE);
Paint_DrawString_EN(10, 0, counterStr, &Font16, WHITE, BLACK);
EPD_4IN2_V2_PartialDisplay(
counterBuffer,
0,
COUNTER_Y,
COUNTER_WIDTH,
COUNTER_Y + COUNTER_HEIGHT);
vTaskDelay(pdMS_TO_TICKS(100)); // Add a small delay to prevent busy looping
}
}
void setup() {
Serial.begin(115200);
if (DEV_Module_Init() != 0) {
Serial.println("Failed to initialize display module.");
return;
}
EPD_4IN2_V2_Init();
Serial.println("e-Paper initialization complete; clearing display...");
//EPD_4IN2_V2_Clear();
Paint_NewImage(displayBuffer, EPD_4IN2_V2_WIDTH, EPD_4IN2_V2_HEIGHT, ROTATE_0, WHITE);
Paint_SelectImage(displayBuffer);
Paint_Clear(WHITE);
Paint_DrawString_EN(10, 0, "F1 Display Booting...", &Font16, WHITE, BLACK);
Paint_DrawString_EN(10, COUNTER_Y, "Counter: 0", &Font16, WHITE, BLACK);
EPD_4IN2_V2_Display(displayBuffer);
DEV_Delay_ms(500);
wifi_connect();
sync_time();
printf("Begin display loop.\n");
Paint_NewImage(counterBuffer, COUNTER_WIDTH, COUNTER_HEIGHT, ROTATE_0, WHITE);
Paint_SelectImage(counterBuffer);
xTaskCreate(display_loop, "display_loop", 1024, NULL, 5, NULL);
xTaskCreate(get_next_race, "get_next_race", 2048, NULL, 5, NULL);
}
+11
View File
@@ -0,0 +1,11 @@
#define WIFI_SSID "your-wifi-ssid"
#define WIFI_PASSWORD "your-wifi-password"
#define WIFI_MAXIMUM_RETRY 3
static const char OPENF1_ROOT_CA[] PROGMEM = R"EOF(
-----BEGIN CERTIFICATE-----
// Place certificate text here
-----END CERTIFICATE-----
)EOF";
-119
View File
@@ -1,119 +0,0 @@
#include "wifi.h"
#include "secrets.h"
#include "config.h"
/* WiFi station Example
This example code is in the Public Domain (or CC0 licensed, at your option.)
Unless required by applicable law or agreed to in writing, this
software is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR
CONDITIONS OF ANY KIND, either express or implied.
*/
/* FreeRTOS event group to signal when we are connected*/
static EventGroupHandle_t s_wifi_event_group;
/* The event group allows multiple bits for each event, but we only care about two events:
* - we are connected to the AP with an IP
* - we failed to connect after the maximum amount of retries */
#define WIFI_CONNECTED_BIT BIT0
#define WIFI_FAIL_BIT BIT1
static const char *TAG = "wifi station";
static int s_retry_num = 0;
static void event_handler(void* arg, esp_event_base_t event_base,
int32_t event_id, void* event_data)
{
if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_START) {
esp_wifi_connect();
} else if (event_base == WIFI_EVENT && event_id == WIFI_EVENT_STA_DISCONNECTED) {
if (s_retry_num < ESP_MAXIMUM_RETRY) {
esp_wifi_connect();
s_retry_num++;
ESP_LOGI(TAG, "retry to connect to the AP");
} else {
xEventGroupSetBits(s_wifi_event_group, WIFI_FAIL_BIT);
}
ESP_LOGI(TAG,"connect to the AP fail");
} else if (event_base == IP_EVENT && event_id == IP_EVENT_STA_GOT_IP) {
ip_event_got_ip_t* event = (ip_event_got_ip_t*) event_data;
ESP_LOGI(TAG, "got ip:" IPSTR, IP2STR(&event->ip_info.ip));
s_retry_num = 0;
xEventGroupSetBits(s_wifi_event_group, WIFI_CONNECTED_BIT);
}
}
void wifi_init_sta(void) {
s_wifi_event_group = xEventGroupCreate();
ESP_ERROR_CHECK(esp_netif_init());
ESP_ERROR_CHECK(esp_event_loop_create_default());
esp_netif_t *sta_netif = esp_netif_create_default_wifi_sta();
wifi_init_config_t cfg = WIFI_INIT_CONFIG_DEFAULT();
ESP_ERROR_CHECK(esp_wifi_init(&cfg));
#ifndef ESP_HOSTNAME
#error "ESP_HOSTNAME is not defined in config.h"
#endif
esp_err_t err = esp_netif_set_hostname(sta_netif, ESP_HOSTNAME);
esp_event_handler_instance_t instance_any_id;
esp_event_handler_instance_t instance_got_ip;
ESP_ERROR_CHECK(esp_event_handler_instance_register(WIFI_EVENT,
ESP_EVENT_ANY_ID,
&event_handler,
NULL,
&instance_any_id));
ESP_ERROR_CHECK(esp_event_handler_instance_register(IP_EVENT,
IP_EVENT_STA_GOT_IP,
&event_handler,
NULL,
&instance_got_ip));
wifi_config_t wifi_config = {
.sta = {
.ssid = ESP_WIFI_SSID,
.password = ESP_WIFI_PASS,
/* Setting a password implies station will connect to all security modes including WEP/WPA.
* However these modes are deprecated and not advisable to be used. Incase your Access point
* doesn't support WPA2, these mode can be enabled by commenting below line */
.threshold.authmode = WIFI_AUTH_WPA2_PSK,
},
};
ESP_ERROR_CHECK(esp_wifi_set_mode(WIFI_MODE_STA) );
ESP_ERROR_CHECK(esp_wifi_set_config(WIFI_IF_STA, &wifi_config) );
ESP_ERROR_CHECK(esp_wifi_start() );
ESP_LOGI(TAG, "wifi_init_sta finished.");
/* Waiting until either the connection is established (WIFI_CONNECTED_BIT) or connection failed for the maximum
* number of re-tries (WIFI_FAIL_BIT). The bits are set by event_handler() (see above) */
EventBits_t bits = xEventGroupWaitBits(s_wifi_event_group,
WIFI_CONNECTED_BIT | WIFI_FAIL_BIT,
pdFALSE,
pdFALSE,
portMAX_DELAY);
/* xEventGroupWaitBits() returns the bits before the call returned, hence we can test which event actually
* happened. */
if (bits & WIFI_CONNECTED_BIT) {
ESP_LOGI(TAG, "connected to ap SSID:%s.",
ESP_WIFI_SSID);
} else if (bits & WIFI_FAIL_BIT) {
ESP_LOGI(TAG, "Failed to connect to SSID:%s.",
ESP_WIFI_SSID);
} else {
ESP_LOGE(TAG, "UNEXPECTED EVENT");
}
/* The event will not be processed after unregister */
ESP_ERROR_CHECK(esp_event_handler_instance_unregister(IP_EVENT, IP_EVENT_STA_GOT_IP, instance_got_ip));
ESP_ERROR_CHECK(esp_event_handler_instance_unregister(WIFI_EVENT, ESP_EVENT_ANY_ID, instance_any_id));
vEventGroupDelete(s_wifi_event_group);
}