bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin/src/module
History
Luc Van Daele 656034d2d9 🐛 Fix G33, Delta radii, reachable (#22795)
2021-12-25 01:22:50 -06:00
..
stepper
🐛 Fix børken E_DUAL_STEPPER_DRIVERS (#23017)
2021-10-26 16:01:55 -05:00
thermistor
✅ Warn about dummy thermistors
2021-10-18 02:00:53 -05:00
delta.cpp
🚸 G33 R and O options (#22707)
2021-10-02 22:31:15 -05:00
delta.h
🚸 G33 R and O options (#22707)
2021-10-02 22:31:15 -05:00
endstops.cpp
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
2021-12-25 00:46:49 -06:00
endstops.h
🐛 No probe enum for DELTA + SENSORLESS_PROBING
2021-10-02 22:31:15 -05:00
motion.cpp
🐛 Fix IDEX + DISABLE_INACTIVE_EXTRUDER (#22925)
2021-12-25 00:45:05 -06:00
motion.h
✨ Polargraph / Makelangelo kinematics (#22790)
2021-10-02 22:31:16 -05:00
planner_bezier.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-15 00:05:03 -05:00
planner_bezier.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
planner.cpp
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
2021-12-25 00:46:49 -06:00
planner.h
🎨 steps_to_mm => mm_per_step (#22847)
2021-10-02 22:31:16 -05:00
polargraph.cpp
✨ Polargraph / Makelangelo kinematics (#22790)
2021-10-02 22:31:16 -05:00
polargraph.h
✨ Polargraph / Makelangelo kinematics (#22790)
2021-10-02 22:31:16 -05:00
printcounter.cpp
🎨 Fewer serial macros
2021-10-02 22:31:15 -05:00
printcounter.h
Configure / disable PRINTCOUNTER save interval (#20856)
2021-01-26 02:30:31 -06:00
probe.cpp
🐛 Fix G33, Delta radii, reachable (#22795)
2021-12-25 01:22:50 -06:00
probe.h
🐛 Fix G33, Delta radii, reachable (#22795)
2021-12-25 01:22:50 -06:00
scara.cpp
🎨 Fewer serial macros
2021-10-02 22:31:15 -05:00
scara.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
servo.cpp
✨ M282 - Detach Servo (#22760)
2021-10-02 22:31:15 -05:00
servo.h
✨ M282 - Detach Servo (#22760)
2021-10-02 22:31:15 -05:00
settings.cpp
🚸 Fix up E3V2 Enhanced (#23100)
2021-12-25 01:18:35 -06:00
settings.h
Optimize MarlinSettings with template methods (#21426)
2021-03-24 07:32:08 -05:00
speed_lookuptable.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
stepper.cpp
⚗️ Use pwm_set_duty over analogWrite to set PWM (#23048)
2021-12-25 00:46:49 -06:00
stepper.h
🩹 Fix EXTRUDER 0 compile warning (#22868)
2021-10-04 01:12:35 -05:00
temperature.cpp
🚸 Fix up E3V2 Enhanced (#23100)
2021-12-25 01:18:35 -06:00
temperature.h
⚡️ Controller Fan software PWM (etc.) (#23102)
2021-12-25 01:15:49 -06:00
tool_change.cpp
🎨 Apply F() to kill / sendinfoscreen
2021-12-25 00:45:04 -06:00
tool_change.h
Tool sensors (#17239)
2021-04-16 08:02:31 -05:00