bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin/src/module
History
tombrazier fc1a620b87 🚩 MPC update (#24253)
2022-06-04 00:57:34 -05:00
..
stepper
🚚 Move speed_lookuptable.h
2022-05-13 01:19:45 -05:00
thermistor
⚡️ Fix noisy ADC - 16x oversampling with 12-bit ADC (#23867)
2022-05-07 16:00:31 -05:00
delta.cpp
🐛 Fix init of delta safe height (for G29, G33, etc.) (#23622)
2022-05-07 15:54:33 -05:00
delta.h
🐛 Fix init of delta safe height (for G29, G33, etc.) (#23622)
2022-05-07 15:54:33 -05:00
endstops.cpp
✏️Fix Markforged endstops/G38 (#24141)
2022-05-09 17:46:23 -05:00
endstops.h
🐛 Define required endstop enums (#23425)
2022-01-09 04:33:24 -06:00
motion.cpp
🐛 Fix SEGMENT_LEVELED_MOVES with UBL
2022-05-22 17:06:22 -05:00
motion.h
⚡️ G12 - Only require used axes to be homed (#23422)
2022-05-07 15:58:31 -05:00
planner_bezier.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-15 00:05:03 -05:00
planner_bezier.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
planner.cpp
🐛 Fix Leveling apply/unapply (#24188)
2022-05-27 17:01:38 -05:00
planner.h
🩹 Fix Fan Tail Speed Init (#24076)
2022-05-09 17:46:23 -05:00
polargraph.cpp
✨ Polargraph / Makelangelo kinematics (#22790)
2021-10-02 22:31:16 -05:00
polargraph.h
✨ Polargraph / Makelangelo kinematics (#22790)
2021-10-02 22:31:16 -05:00
printcounter.cpp
💥 Rename ExtUI settings methods
2022-05-07 18:13:09 -05:00
printcounter.h
🩹 Fix PRINTCOUNTER with EXTRUDERS 0 (#24063)
2022-05-07 17:56:04 -05:00
probe.cpp
🐛 Fix Bed/Chamber PID Autotune with MPCTEMP (#23983)
2022-06-03 22:06:50 -05:00
probe.h
🐛 Fix Bed/Chamber PID Autotune with MPCTEMP (#23983)
2022-06-03 22:06:50 -05:00
scara.cpp
🎨 Fewer serial macros
2021-10-02 22:31:15 -05:00
scara.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
servo.cpp
♻️ Refactor HAL as singleton (#23357, #23871, #23897)
2022-05-07 15:58:30 -05:00
servo.h
♻️ Refactor HAL as singleton (#23357, #23871, #23897)
2022-05-07 15:58:30 -05:00
settings.cpp
🚩 MPC update (#24253)
2022-06-04 00:57:34 -05:00
settings.h
🧑‍💻 Remove extraneous 'inline' hints
2022-01-09 04:33:17 -06:00
stepper.cpp
🚚 Move speed_lookuptable.h
2022-05-13 01:19:45 -05:00
stepper.h
🚚 Move speed_lookuptable.h
2022-05-13 01:19:45 -05:00
temperature.cpp
🚩 MPC update (#24253)
2022-06-04 00:57:34 -05:00
temperature.h
🚩 MPC update (#24253)
2022-06-04 00:57:34 -05:00
tool_change.cpp
🐛 Fix Tool Change priming (#21142)
2022-06-03 22:06:50 -05:00
tool_change.h
🐛 Fix Tool Change priming (#21142)
2022-06-03 22:06:50 -05:00