faae900747
* split tft folder in two: tft for color ui; tft_io for shared tft code * after the files got moved, now the code was moved to the right place * classic ui using TFT IO init lcd codes * feature to compile tft_io when enabled * compiling fix * lvgl spi tft working with tft io init codes * there is no need for separeted fsmc and spi class in lvgl anymore, as tft io handle everything * remove debug * base for TFT rotation and mirroring API, and ILI9488 support * ST7796S rotate and mirror support * ST7789V rotate and mirror support * ST7735 rotate and mirror support * ILI9341 rotate and mirror support * ILI9328 rotate and mirror support * R61505 rotate and mirror support * MKS TFT definitions * more configs for mks tfts * update config * naming typo * to configure the user interface * ANYCUBIC_TFT35 * tft configs * support for SSD1963 * tft display types * updated conditionals lcd; first board fully working with the new code - all 3 ui! * compatiblity * changed name * move classic ui file name * rename TURN -> ROTATE * GRAPHICAL_TFT_ROTATE_180 deprecated * first fsmc board fully working - chitu v5 * mks robin nano v1.2 + tft 35 ok! * right pin name * anycubic tft tested in a TRIGORILLA_PRO * chitu v6 * nano 32 tft orientation * mks tft43 * mks tft43 rotation * fixed LONGER LK tft setup * GRAPHICAL_TFT_UPSCALE defined by the display type * better offsets defaults * Update Configuration.h * Update tft_fsmc.cpp * Update Conditionals_LCD.h * Tweak comments * update nano tests * Revert "update nano tests" This reverts commit a071ebbfad30e28855a4a5695ec8a726542a1a65. * default tft * outdated comments * to not break non-vscode builds * upscale tft 35 * support tft 180 rotation for color ui * Each TFT Driver is responsible for its default color mode. * use auto detect in mks displays, because some of them could be shipped with diferent drivers * extra s * unused code * wrong -1 * missing mirror options * Smaller regex pattern * Comment updates * Clean up old defines * Apply pins formatting * GRAPHICAL_TFT_ROTATE_180 => TFT_ROTATE_180 * MKS_ROBIN_TFT_V1_1R * merge fix * correct resolution * auto is default, dont need be there, and it will allow the user to configure it even for named displays * to not use rotation with MKS_ROBIN_TFT_V1_1R * i like () in macros * avoid sleepy commits * default for st7789 is rgb * nano follow up * to allow ili9328 rotation * default is rgb * boards merge follow up * to match bootloader orientation * HAS_TOUCH_XPT2046 is not hal specific anymore * lets not forget LPC * 180 rotation for ili9328 and R61505 * Clean up whitespace Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com> Co-authored-by: Scott Lahteine <github@thinkyhead.com>
219 lines
6.4 KiB
C
219 lines
6.4 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
#if NOT_TARGET(__STM32F1__, __STM32F4__)
|
|
#error "Oops! Select an STM32F1/4 board in 'Tools > Board.'"
|
|
#endif
|
|
|
|
/**
|
|
* 2017 Victor Perez Marlin for stm32f1 test
|
|
*/
|
|
|
|
#define BOARD_INFO_NAME "Chitu3D"
|
|
#define DEFAULT_MACHINE_NAME "STM32F103ZET6"
|
|
|
|
#define DISABLE_JTAG
|
|
|
|
//
|
|
// EEPROM
|
|
//
|
|
|
|
#if NO_EEPROM_SELECTED
|
|
#define FLASH_EEPROM_EMULATION
|
|
#endif
|
|
|
|
#if ENABLED(FLASH_EEPROM_EMULATION)
|
|
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
|
|
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
|
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
|
|
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
|
|
#else
|
|
#define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM
|
|
#endif
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_STOP_PIN PG10
|
|
#define Y_STOP_PIN PA12
|
|
#define Z_STOP_PIN PG9
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_ENABLE_PIN PC13
|
|
#define X_STEP_PIN PE5
|
|
#define X_DIR_PIN PE6
|
|
|
|
#define Y_ENABLE_PIN PE4
|
|
#define Y_STEP_PIN PE2
|
|
#define Y_DIR_PIN PE3
|
|
|
|
#define Z_ENABLE_PIN PE1
|
|
#define Z_STEP_PIN PB9
|
|
#define Z_DIR_PIN PE0
|
|
|
|
#define Z2_ENABLE_PIN PF3
|
|
#define Z2_STEP_PIN PF5
|
|
#define Z2_DIR_PIN PF1
|
|
|
|
#define E0_ENABLE_PIN PB8
|
|
#define E0_STEP_PIN PB4
|
|
#define E0_DIR_PIN PB5
|
|
|
|
#define E1_ENABLE_PIN PG8
|
|
#define E1_STEP_PIN PC7
|
|
#define E1_DIR_PIN PC6
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN PA1 // TH1
|
|
#define TEMP_BED_PIN PA0 // TB1
|
|
|
|
//
|
|
// Heaters
|
|
//
|
|
#define HEATER_0_PIN PG12 // HEATER1
|
|
#define HEATER_BED_PIN PG11 // HOT BED
|
|
//#define HEATER_BED_INVERTING true
|
|
|
|
//
|
|
// Fans
|
|
//
|
|
#define CONTROLLER_FAN_PIN PD6 // BOARD FAN
|
|
#define FAN_PIN PG13 // FAN
|
|
#define FAN_PIN_2 PG14
|
|
|
|
//
|
|
// Misc
|
|
//
|
|
#define BEEPER_PIN PB0
|
|
//#define LED_PIN PD3
|
|
//#define POWER_LOSS_PIN PG2 // PG4 PW_DET
|
|
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN PA15 // MT_DET
|
|
#endif
|
|
#ifndef FIL_RUNOUT2_PIN
|
|
#define FIL_RUNOUT2_PIN PF13
|
|
#endif
|
|
|
|
// SPI Flash
|
|
#define HAS_SPI_FLASH 1
|
|
#if HAS_SPI_FLASH
|
|
#define SPI_FLASH_SIZE 0x200000 // 2MB
|
|
#endif
|
|
|
|
// SPI 2
|
|
#define W25QXX_CS_PIN PB12
|
|
#define W25QXX_MOSI_PIN PB15
|
|
#define W25QXX_MISO_PIN PB14
|
|
#define W25QXX_SCK_PIN PB13
|
|
|
|
//
|
|
// TronXY TFT Support
|
|
//
|
|
|
|
#if HAS_FSMC_TFT
|
|
|
|
// Shared FSMC
|
|
|
|
#define TOUCH_CS_PIN PB7 // SPI1_NSS
|
|
#define TOUCH_SCK_PIN PA5 // SPI1_SCK
|
|
#define TOUCH_MISO_PIN PA6 // SPI1_MISO
|
|
#define TOUCH_MOSI_PIN PA7 // SPI1_MOSI
|
|
|
|
#define TFT_RESET_PIN PF11
|
|
#define TFT_BACKLIGHT_PIN PD13
|
|
|
|
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
|
#define FSMC_CS_PIN PD7
|
|
#define FSMC_RS_PIN PD11
|
|
#define FSMC_DMA_DEV DMA2
|
|
#define FSMC_DMA_CHANNEL DMA_CH5
|
|
|
|
#endif
|
|
|
|
#if ENABLED(TFT_LVGL_UI)
|
|
// LVGL
|
|
#define HAS_SPI_FLASH_FONT 1
|
|
#define HAS_GCODE_PREVIEW 1
|
|
#define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0
|
|
#define HAS_LANG_SELECT_SCREEN 1
|
|
#define HAS_BAK_VIEW_IN_FLASH 0
|
|
#define HAS_LOGO_IN_FLASH 0
|
|
#elif ENABLED(TFT_COLOR_UI)
|
|
// Color UI
|
|
#define TFT_DRIVER ILI9488
|
|
#define TFT_BUFFER_SIZE 14400
|
|
#elif ENABLED(TFT_CLASSIC_UI)
|
|
// Emulated DOGM
|
|
#define GRAPHICAL_TFT_UPSCALE 3
|
|
#endif
|
|
|
|
// XPT2046 Touch Screen calibration
|
|
#if EITHER(TFT_LVGL_UI, TFT_COLOR_UI)
|
|
#ifndef XPT2046_X_CALIBRATION
|
|
#define XPT2046_X_CALIBRATION -17181
|
|
#endif
|
|
#ifndef XPT2046_Y_CALIBRATION
|
|
#define XPT2046_Y_CALIBRATION 11434
|
|
#endif
|
|
#ifndef XPT2046_X_OFFSET
|
|
#define XPT2046_X_OFFSET 501
|
|
#endif
|
|
#ifndef XPT2046_Y_OFFSET
|
|
#define XPT2046_Y_OFFSET -9
|
|
#endif
|
|
#elif ENABLED(TFT_CLASSIC_UI)
|
|
#ifndef XPT2046_X_CALIBRATION
|
|
#define XPT2046_X_CALIBRATION -12316
|
|
#endif
|
|
#ifndef XPT2046_Y_CALIBRATION
|
|
#define XPT2046_Y_CALIBRATION 8981
|
|
#endif
|
|
#ifndef XPT2046_X_OFFSET
|
|
#define XPT2046_X_OFFSET 340
|
|
#endif
|
|
#ifndef XPT2046_Y_OFFSET
|
|
#define XPT2046_Y_OFFSET -20
|
|
#endif
|
|
#endif
|
|
|
|
// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available
|
|
// so SPI2 is required.
|
|
#define ENABLE_SPI2
|
|
#define SCK_PIN PB13
|
|
#define MISO_PIN PB14
|
|
#define MOSI_PIN PB15
|
|
#define SS_PIN PB12
|
|
|
|
//
|
|
// SD Card
|
|
//
|
|
#define SDIO_SUPPORT
|
|
#define SD_DETECT_PIN -1 // PF0, but it isn't connected
|
|
#define SDIO_CLOCK 4500000
|
|
#define SDIO_READ_RETRIES 16
|