bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
f8f68f9259
Marlin_Firmware/Marlin/src/gcode/gcode.h
InsanityAutomation be13220e32 📺 ExtUI pause state response (#22164)
2021-07-17 01:54:27 -05:00

1130 lines
37 KiB
C++
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* gcode.h - Temporary container for all gcode handlers
*/
/**
* -----------------
* G-Codes in Marlin
* -----------------
*
* Helpful G-code references:
* - https://marlinfw.org/meta/gcode
* - https://reprap.org/wiki/G-code
* - https://linuxcnc.org/docs/html/gcode.html
*
* Help to document Marlin's G-codes online:
* - https://github.com/MarlinFirmware/MarlinDocumentation
*
* -----------------
*
* "G" Codes
*
* G0 -> G1
* G1 - Coordinated Movement X Y Z E
* G2 - CW ARC
* G3 - CCW ARC
* G4 - Dwell S<seconds> or P<milliseconds>
* G5 - Cubic B-spline with XYZE destination and IJPQ offsets
* G10 - Retract filament according to settings of M207 (Requires FWRETRACT)
* G11 - Retract recover filament according to settings of M208 (Requires FWRETRACT)
* G12 - Clean tool (Requires NOZZLE_CLEAN_FEATURE)
* G17 - Select Plane XY (Requires CNC_WORKSPACE_PLANES)
* G18 - Select Plane ZX (Requires CNC_WORKSPACE_PLANES)
* G19 - Select Plane YZ (Requires CNC_WORKSPACE_PLANES)
* G20 - Set input units to inches (Requires INCH_MODE_SUPPORT)
* G21 - Set input units to millimeters (Requires INCH_MODE_SUPPORT)
* G26 - Mesh Validation Pattern (Requires G26_MESH_VALIDATION)
* G27 - Park Nozzle (Requires NOZZLE_PARK_FEATURE)
* G28 - Home one or more axes
* G29 - Start or continue the bed leveling probe procedure (Requires bed leveling)
* G30 - Single Z probe, probes bed at X Y location (defaults to current XY location)
* G31 - Dock sled (Z_PROBE_SLED only)
* G32 - Undock sled (Z_PROBE_SLED only)
* G33 - Delta Auto-Calibration (Requires DELTA_AUTO_CALIBRATION)
* G34 - Z Stepper automatic alignment using probe: I<iterations> T<accuracy> A<amplification> (Requires Z_STEPPER_AUTO_ALIGN)
* G35 - Read bed corners to help adjust bed screws: T<screw_thread> (Requires ASSISTED_TRAMMING)
* G38 - Probe in any direction using the Z_MIN_PROBE (Requires G38_PROBE_TARGET)
* G42 - Coordinated move to a mesh point (Requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BLINEAR, or AUTO_BED_LEVELING_UBL)
* G60 - Save current position. (Requires SAVED_POSITIONS)
* G61 - Apply/restore saved coordinates. (Requires SAVED_POSITIONS)
* G76 - Calibrate first layer temperature offsets. (Requires PROBE_TEMP_COMPENSATION)
* G80 - Cancel current motion mode (Requires GCODE_MOTION_MODES)
* G90 - Use Absolute Coordinates
* G91 - Use Relative Coordinates
* G92 - Set current position to coordinates given
*
* "M" Codes
*
* M0 - Unconditional stop - Wait for user to press a button on the LCD (Only if ULTRA_LCD is enabled)
* M1 -> M0
* M3 - Turn ON Laser | Spindle (clockwise), set Power | Speed. (Requires SPINDLE_FEATURE or LASER_FEATURE)
* M4 - Turn ON Laser | Spindle (counter-clockwise), set Power | Speed. (Requires SPINDLE_FEATURE or LASER_FEATURE)
* M5 - Turn OFF Laser | Spindle. (Requires SPINDLE_FEATURE or LASER_FEATURE)
* M7 - Turn mist coolant ON. (Requires COOLANT_CONTROL)
* M8 - Turn flood coolant ON. (Requires COOLANT_CONTROL)
* M9 - Turn coolant OFF. (Requires COOLANT_CONTROL)
* M10 - Turn Vacuum or Blower motor ON (Requires AIR_EVACUATION)
* M11 - Turn Vacuum or Blower motor OFF (Requires AIR_EVACUATION)
* M12 - Set up closed loop control system. (Requires EXTERNAL_CLOSED_LOOP_CONTROLLER)
* M16 - Expected printer check. (Requires EXPECTED_PRINTER_CHECK)
* M17 - Enable/Power all stepper motors
* M18 - Disable all stepper motors; same as M84
* M20 - List SD card. (Requires SDSUPPORT)
* M21 - Init SD card. (Requires SDSUPPORT)
* M22 - Release SD card. (Requires SDSUPPORT)
* M23 - Select SD file: "M23 /path/file.gco". (Requires SDSUPPORT)
* M24 - Start/resume SD print. (Requires SDSUPPORT)
* M25 - Pause SD print. (Requires SDSUPPORT)
* M26 - Set SD position in bytes: "M26 S12345". (Requires SDSUPPORT)
* M27 - Report SD print status. (Requires SDSUPPORT)
* OR, with 'S<seconds>' set the SD status auto-report interval. (Requires AUTO_REPORT_SD_STATUS)
* OR, with 'C' get the current filename.
* M28 - Start SD write: "M28 /path/file.gco". (Requires SDSUPPORT)
* M29 - Stop SD write. (Requires SDSUPPORT)
* M30 - Delete file from SD: "M30 /path/file.gco"
* M31 - Report time since last M109 or SD card start to serial.
* M32 - Select file and start SD print: "M32 [S<bytepos>] !/path/file.gco#". (Requires SDSUPPORT)
* Use P to run other files as sub-programs: "M32 P !filename#"
* The '#' is necessary when calling from within sd files, as it stops buffer prereading
* M33 - Get the longname version of a path. (Requires LONG_FILENAME_HOST_SUPPORT)
* M34 - Set SD Card sorting options. (Requires SDCARD_SORT_ALPHA)
* M42 - Change pin status via gcode: M42 P<pin> S<value>. LED pin assumed if P is omitted. (Requires DIRECT_PIN_CONTROL)
* M43 - Display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
* M48 - Measure Z Probe repeatability: M48 P<points> X<pos> Y<pos> V<level> E<engage> L<legs> S<chizoid>. (Requires Z_MIN_PROBE_REPEATABILITY_TEST)
* M73 - Set the progress percentage. (Requires LCD_SET_PROGRESS_MANUALLY)
* M75 - Start the print job timer.
* M76 - Pause the print job timer.
* M77 - Stop the print job timer.
* M78 - Show statistical information about the print jobs. (Requires PRINTCOUNTER)
* M80 - Turn on Power Supply. (Requires PSU_CONTROL)
* M81 - Turn off Power Supply. (Requires PSU_CONTROL)
* M82 - Set E codes absolute (default).
* M83 - Set E codes relative while in Absolute (G90) mode.
* M84 - Disable steppers until next move, or use S<seconds> to specify an idle
* duration after which steppers should turn off. S0 disables the timeout.
* M85 - Set inactivity shutdown timer with parameter S<seconds>. To disable set zero (default)
* M92 - Set planner.settings.axis_steps_per_mm for one or more axes.
* M100 - Watch Free Memory (for debugging) (Requires M100_FREE_MEMORY_WATCHER)
* M104 - Set extruder target temp.
* M105 - Report current temperatures.
* M106 - Set print fan speed.
* M107 - Print fan off.
* M108 - Break out of heating loops (M109, M190, M303). With no controller, breaks out of M0/M1. (Requires EMERGENCY_PARSER)
* M109 - S<temp> Wait for extruder current temp to reach target temp. ** Wait only when heating! **
* R<temp> Wait for extruder current temp to reach target temp. ** Wait for heating or cooling. **
* If AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
* M110 - Set the current line number. (Used by host printing)
* M111 - Set debug flags: "M111 S<flagbits>". See flag bits defined in enum.h.
* M112 - Full Shutdown.
* M113 - Get or set the timeout interval for Host Keepalive "busy" messages. (Requires HOST_KEEPALIVE_FEATURE)
* M114 - Report current position.
* M115 - Report capabilities. (Extended capabilities requires EXTENDED_CAPABILITIES_REPORT)
* M117 - Display a message on the controller screen. (Requires an LCD)
* M118 - Display a message in the host console.
* M119 - Report endstops status.
* M120 - Enable endstops detection.
* M121 - Disable endstops detection.
* M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
* M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE)
* M126 - Solenoid Air Valve Open. (Requires BARICUDA)
* M127 - Solenoid Air Valve Closed. (Requires BARICUDA)
* M128 - EtoP Open. (Requires BARICUDA)
* M129 - EtoP Closed. (Requires BARICUDA)
* M140 - Set bed target temp. S<temp>
* M141 - Set heated chamber target temp. S<temp> (Requires a chamber heater)
* M143 - Set cooler target temp. S<temp> (Requires a laser cooling device)
* M145 - Set heatup values for materials on the LCD. H<hotend> B<bed> F<fan speed> for S<material> (0=PLA, 1=ABS)
* M149 - Set temperature units. (Requires TEMPERATURE_UNITS_SUPPORT)
* M150 - Set Status LED Color as R<red> U<green> B<blue> W<white> P<bright>. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, PCA9533, or PCA9632).
* M154 - Auto-report position with interval of S<seconds>. (Requires AUTO_REPORT_POSITION)
* M155 - Auto-report temperatures with interval of S<seconds>. (Requires AUTO_REPORT_TEMPERATURES)
* M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER)
* M164 - Commit the mix and save to a virtual tool (current, or as specified by 'S'). (Requires MIXING_EXTRUDER)
* M165 - Set the mix for the mixing extruder (and current virtual tool) with parameters ABCDHI. (Requires MIXING_EXTRUDER and DIRECT_MIXING_IN_G1)
* M166 - Set the Gradient Mix for the mixing extruder. (Requires GRADIENT_MIX)
* M190 - S<temp> Wait for bed current temp to reach target temp. ** Wait only when heating! **
* R<temp> Wait for bed current temp to reach target temp. ** Wait for heating or cooling. **
* M193 - R<temp> Wait for cooler temp to reach target temp. ** Wait for cooling. **
* M200 - Set filament diameter, D<diameter>, setting E axis units to cubic. (Use S0 to revert to linear units.)
* M201 - Set max acceleration in units/s^2 for print moves: "M201 X<accel> Y<accel> Z<accel> E<accel>"
* M202 - Set max acceleration in units/s^2 for travel moves: "M202 X<accel> Y<accel> Z<accel> E<accel>" ** UNUSED IN MARLIN! **
* M203 - Set maximum feedrate: "M203 X<fr> Y<fr> Z<fr> E<fr>" in units/sec.
* M204 - Set default acceleration in units/sec^2: P<printing> R<extruder_only> T<travel>
* M205 - Set advanced settings. Current units apply:
S<print> T<travel> minimum speeds
B<minimum segment time>
X<max X jerk>, Y<max Y jerk>, Z<max Z jerk>, E<max E jerk>
* M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
* M207 - Set Retract Length: S<length>, Feedrate: F<units/min>, and Z lift: Z<distance>. (Requires FWRETRACT)
* M208 - Set Recover (unretract) Additional (!) Length: S<length> and Feedrate: F<units/min>. (Requires FWRETRACT)
* M209 - Turn Automatic Retract Detection on/off: S<0|1> (For slicers that don't support G10/11). (Requires FWRETRACT_AUTORETRACT)
Every normal extrude-only move will be classified as retract depending on the direction.
* M211 - Enable, Disable, and/or Report software endstops: S<0|1> (Requires MIN_SOFTWARE_ENDSTOPS or MAX_SOFTWARE_ENDSTOPS)
* M217 - Set filament swap parameters: "M217 S<length> P<feedrate> R<feedrate>". (Requires SINGLENOZZLE)
* M218 - Set/get a tool offset: "M218 T<index> X<offset> Y<offset>". (Requires 2 or more extruders)
* M220 - Set Feedrate Percentage: "M220 S<percent>" (i.e., "FR" on the LCD)
* Use "M220 B" to back up the Feedrate Percentage and "M220 R" to restore it. (Requires an MMU_MODEL version 2 or 2S)
* M221 - Set Flow Percentage: "M221 S<percent>"
* M226 - Wait until a pin is in a given state: "M226 P<pin> S<state>" (Requires DIRECT_PIN_CONTROL)
* M240 - Trigger a camera to take a photograph. (Requires PHOTO_GCODE)
* M250 - Set LCD contrast: "M250 C<contrast>" (0-63). (Requires LCD support)
* M260 - i2c Send Data (Requires EXPERIMENTAL_I2CBUS)
* M261 - i2c Request Data (Requires EXPERIMENTAL_I2CBUS)
* M280 - Set servo position absolute: "M280 P<index> S<angle|µs>". (Requires servos)
* M281 - Set servo min|max position: "M281 P<index> L<min> U<max>". (Requires EDITABLE_SERVO_ANGLES)
* M290 - Babystepping (Requires BABYSTEPPING)
* M300 - Play beep sound S<frequency Hz> P<duration ms>
* M301 - Set PID parameters P I and D. (Requires PIDTEMP)
* M302 - Allow cold extrudes, or set the minimum extrude S<temperature>. (Requires PREVENT_COLD_EXTRUSION)
* M303 - PID relay autotune S<temperature> sets the target temperature. Default 150C. (Requires PIDTEMP)
* M304 - Set bed PID parameters P I and D. (Requires PIDTEMPBED)
* M305 - Set user thermistor parameters R T and P. (Requires TEMP_SENSOR_x 1000)
* M309 - Set chamber PID parameters P I and D. (Requires PIDTEMPCHAMBER)
* M350 - Set microstepping mode. (Requires digital microstepping pins.)
* M351 - Toggle MS1 MS2 pins directly. (Requires digital microstepping pins.)
* M355 - Set Case Light on/off and set brightness. (Requires CASE_LIGHT_PIN)
* M380 - Activate solenoid on active extruder. (Requires EXT_SOLENOID)
* M381 - Disable all solenoids. (Requires EXT_SOLENOID)
* M400 - Finish all moves.
* M401 - Deploy and activate Z probe. (Requires a probe)
* M402 - Deactivate and stow Z probe. (Requires a probe)
* M403 - Set filament type for PRUSA MMU2
* M404 - Display or set the Nominal Filament Width: "W<diameter>". (Requires FILAMENT_WIDTH_SENSOR)
* M405 - Enable Filament Sensor flow control. "M405 D<delay_cm>". (Requires FILAMENT_WIDTH_SENSOR)
* M406 - Disable Filament Sensor flow control. (Requires FILAMENT_WIDTH_SENSOR)
* M407 - Display measured filament diameter in millimeters. (Requires FILAMENT_WIDTH_SENSOR)
* M410 - Quickstop. Abort all planned moves.
* M412 - Enable / Disable Filament Runout Detection. (Requires FILAMENT_RUNOUT_SENSOR)
* M413 - Enable / Disable Power-Loss Recovery. (Requires POWER_LOSS_RECOVERY)
* M414 - Set language by index. (Requires LCD_LANGUAGE_2...)
* M420 - Enable/Disable Leveling (with current values) S1=enable S0=disable (Requires MESH_BED_LEVELING or ABL)
* M421 - Set a single Z coordinate in the Mesh Leveling grid. X<units> Y<units> Z<units> (Requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL)
* M422 - Set Z Stepper automatic alignment position using probe. X<units> Y<units> A<axis> (Requires Z_STEPPER_AUTO_ALIGN)
* M425 - Enable/Disable and tune backlash correction. (Requires BACKLASH_COMPENSATION and BACKLASH_GCODE)
* M428 - Set the home_offset based on the current_position. Nearest edge applies. (Disabled by NO_WORKSPACE_OFFSETS or DELTA)
* M430 - Read the system current, voltage, and power (Requires POWER_MONITOR_CURRENT, POWER_MONITOR_VOLTAGE, or POWER_MONITOR_FIXED_VOLTAGE)
* M486 - Identify and cancel objects. (Requires CANCEL_OBJECTS)
* M500 - Store parameters in EEPROM. (Requires EEPROM_SETTINGS)
* M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS)
* M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! **
* M503 - Print the current settings (in memory): "M503 S<verbose>". S0 specifies compact output.
* M504 - Validate EEPROM contents. (Requires EEPROM_SETTINGS)
* M510 - Lock Printer
* M511 - Unlock Printer
* M512 - Set/Change/Remove Password
* M524 - Abort the current SD print job started with M24. (Requires SDSUPPORT)
* M540 - Enable/disable SD card abort on endstop hit: "M540 S<state>". (Requires SD_ABORT_ON_ENDSTOP_HIT)
* M552 - Get or set IP address. Enable/disable network interface. (Requires enabled Ethernet port)
* M553 - Get or set IP netmask. (Requires enabled Ethernet port)
* M554 - Get or set IP gateway. (Requires enabled Ethernet port)
* M569 - Enable stealthChop on an axis. (Requires at least one _DRIVER_TYPE to be TMC2130/2160/2208/2209/5130/5160)
* M600 - Pause for filament change: "M600 X<pos> Y<pos> Z<raise> E<first_retract> L<later_retract>". (Requires ADVANCED_PAUSE_FEATURE)
* M603 - Configure filament change: "M603 T<tool> U<unload_length> L<load_length>". (Requires ADVANCED_PAUSE_FEATURE)
* M605 - Set Dual X-Carriage movement mode: "M605 S<mode> [X<x_offset>] [R<temp_offset>]". (Requires DUAL_X_CARRIAGE)
* M665 - Set delta configurations: "M665 H<delta height> L<diagonal rod> R<delta radius> S<segments/s> B<calibration radius> X<Alpha angle trim> Y<Beta angle trim> Z<Gamma angle trim> (Requires DELTA)
* M666 - Set/get offsets for delta (Requires DELTA) or dual endstops. (Requires [XYZ]_DUAL_ENDSTOPS)
* M672 - Set/Reset Duet Smart Effector's sensitivity. (Requires DUET_SMART_EFFECTOR and SMART_EFFECTOR_MOD_PIN)
* M701 - Load filament (Requires FILAMENT_LOAD_UNLOAD_GCODES)
* M702 - Unload filament (Requires FILAMENT_LOAD_UNLOAD_GCODES)
* M808 - Set or Goto a Repeat Marker (Requires GCODE_REPEAT_MARKERS)
* M810-M819 - Define/execute a G-code macro (Requires GCODE_MACROS)
* M851 - Set Z probe's XYZ offsets in current units. (Negative values: X=left, Y=front, Z=below)
* M852 - Set skew factors: "M852 [I<xy>] [J<xz>] [K<yz>]". (Requires SKEW_CORRECTION_GCODE, and SKEW_CORRECTION_FOR_Z for IJ)
* M860 - Report the position of position encoder modules.
* M861 - Report the status of position encoder modules.
* M862 - Perform an axis continuity test for position encoder modules.
* M863 - Perform steps-per-mm calibration for position encoder modules.
* M864 - Change position encoder module I2C address.
* M865 - Check position encoder module firmware version.
* M866 - Report or reset position encoder module error count.
* M867 - Enable/disable or toggle error correction for position encoder modules.
* M868 - Report or set position encoder module error correction threshold.
* M869 - Report position encoder module error.
* M871 - Print/reset/clear first layer temperature offset values. (Requires PROBE_TEMP_COMPENSATION)
* M192 - Wait for probe temp (Requires PROBE_TEMP_COMPENSATION)
* M876 - Handle Prompt Response. (Requires HOST_PROMPT_SUPPORT and not EMERGENCY_PARSER)
* M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE)
* M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660 or L6470)
* M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots)
* M908 - Control digital trimpot directly. (Requires HAS_MOTOR_CURRENT_DAC or DIGIPOTSS_PIN)
* M909 - Print digipot/DAC current value. (Requires HAS_MOTOR_CURRENT_DAC)
* M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires HAS_MOTOR_CURRENT_DAC)
* M911 - Report stepper driver overtemperature pre-warn condition. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/2160/5130/5160/2208/2209/2660)
* M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD)
* M914 - Set StallGuard sensitivity. (Requires SENSORLESS_HOMING or SENSORLESS_PROBING)
* M916 - L6470 tuning: Increase KVAL_HOLD until thermal warning. (Requires at least one _DRIVER_TYPE L6470)
* M917 - L6470 tuning: Find minimum current thresholds. (Requires at least one _DRIVER_TYPE L6470)
* M918 - L6470 tuning: Increase speed until max or error. (Requires at least one _DRIVER_TYPE L6470)
* M951 - Set Magnetic Parking Extruder parameters. (Requires MAGNETIC_PARKING_EXTRUDER)
* M7219 - Control Max7219 Matrix LEDs. (Requires MAX7219_GCODE)
*
* M360 - SCARA calibration: Move to cal-position ThetaA (0 deg calibration)
* M361 - SCARA calibration: Move to cal-position ThetaB (90 deg calibration - steps per degree)
* M362 - SCARA calibration: Move to cal-position PsiA (0 deg calibration)
* M363 - SCARA calibration: Move to cal-position PsiB (90 deg calibration - steps per degree)
* M364 - SCARA calibration: Move to cal-position PSIC (90 deg to Theta calibration position)
*
* ************ Custom codes - This can change to suit future G-code regulations
* G425 - Calibrate using a conductive object. (Requires CALIBRATION_GCODE)
* M928 - Start SD logging: "M928 filename.gco". Stop with M29. (Requires SDSUPPORT)
* M993 - Backup SPI Flash to SD
* M994 - Load a Backup from SD to SPI Flash
* M995 - Touch screen calibration for TFT display
* M997 - Perform in-application firmware update
* M999 - Restart after being stopped by error
* D... - Custom Development G-code. Add hooks to 'gcode_D.cpp' for developers to test features. (Requires MARLIN_DEV_MODE)
*
* "T" Codes
*
* T0-T3 - Select an extruder (tool) by index: "T<n> F<units/min>"
*/
#include "../inc/MarlinConfig.h"
#include "parser.h"
#if ENABLED(I2C_POSITION_ENCODERS)
#include "../feature/encoder_i2c.h"
#endif
#if IS_SCARA || defined(G0_FEEDRATE)
#define HAS_FAST_MOVES 1
#endif
enum AxisRelative : uint8_t {
LOGICAL_AXIS_LIST(REL_E, REL_X, REL_Y, REL_Z, REL_I, REL_J, REL_K)
#if HAS_EXTRUDERS
, E_MODE_ABS, E_MODE_REL
#endif
};
extern const char G28_STR[];
class GcodeSuite {
public:
static uint8_t axis_relative;
static inline bool axis_is_relative(const AxisEnum a) {
#if HAS_EXTRUDERS
if (a == E_AXIS) {
if (TEST(axis_relative, E_MODE_REL)) return true;
if (TEST(axis_relative, E_MODE_ABS)) return false;
}
#endif
return TEST(axis_relative, a);
}
static inline void set_relative_mode(const bool rel) {
axis_relative = rel ? (0 LOGICAL_AXIS_GANG(
| _BV(REL_E),
| _BV(REL_X), | _BV(REL_Y), | _BV(REL_Z),
| _BV(REL_I), | _BV(REL_J), | _BV(REL_K)
)) : 0;
}
#if HAS_EXTRUDERS
static inline void set_e_relative() {
CBI(axis_relative, E_MODE_ABS);
SBI(axis_relative, E_MODE_REL);
}
static inline void set_e_absolute() {
CBI(axis_relative, E_MODE_REL);
SBI(axis_relative, E_MODE_ABS);
}
#endif
#if ENABLED(CNC_WORKSPACE_PLANES)
/**
* Workspace planes only apply to G2/G3 moves
* (and "canned cycles" - not a current feature)
*/
enum WorkspacePlane : char { PLANE_XY, PLANE_ZX, PLANE_YZ };
static WorkspacePlane workspace_plane;
#endif
#define MAX_COORDINATE_SYSTEMS 9
#if ENABLED(CNC_COORDINATE_SYSTEMS)
static int8_t active_coordinate_system;
static xyz_pos_t coordinate_system[MAX_COORDINATE_SYSTEMS];
static bool select_coordinate_system(const int8_t _new);
#endif
static millis_t previous_move_ms, max_inactive_time, stepper_inactive_time;
FORCE_INLINE static void reset_stepper_timeout(const millis_t ms=millis()) { previous_move_ms = ms; }
FORCE_INLINE static bool stepper_max_timed_out(const millis_t ms=millis()) {
return max_inactive_time && ELAPSED(ms, previous_move_ms + max_inactive_time);
}
FORCE_INLINE static bool stepper_inactive_timeout(const millis_t ms=millis()) {
return ELAPSED(ms, previous_move_ms + stepper_inactive_time);
}
static int8_t get_target_extruder_from_command();
static int8_t get_target_e_stepper_from_command();
static void get_destination_from_command();
static void process_parsed_command(const bool no_ok=false);
static void process_next_command();
// Execute G-code in-place, preserving current G-code parameters
static void process_subcommands_now_P(PGM_P pgcode);
static void process_subcommands_now(char * gcode);
static inline void home_all_axes(const bool keep_leveling=false) {
process_subcommands_now_P(keep_leveling ? G28_STR : TERN(CAN_SET_LEVELING_AFTER_G28, PSTR("G28L0"), G28_STR));
}
#if EITHER(HAS_AUTO_REPORTING, HOST_KEEPALIVE_FEATURE)
static bool autoreport_paused;
static inline bool set_autoreport_paused(const bool p) {
const bool was = autoreport_paused;
autoreport_paused = p;
return was;
}
#else
static constexpr bool autoreport_paused = false;
static inline bool set_autoreport_paused(const bool) { return false; }
#endif
#if ENABLED(HOST_KEEPALIVE_FEATURE)
/**
* States for managing Marlin and host communication
* Marlin sends messages if blocked or busy
*/
enum MarlinBusyState : char {
NOT_BUSY, // Not in a handler
IN_HANDLER, // Processing a GCode
IN_PROCESS, // Known to be blocking command input (as in G29)
PAUSED_FOR_USER, // Blocking pending any input
PAUSED_FOR_INPUT // Blocking pending text input (concept)
};
static MarlinBusyState busy_state;
static uint8_t host_keepalive_interval;
static void host_keepalive();
static inline bool host_keepalive_is_paused() { return busy_state >= PAUSED_FOR_USER; }
#define KEEPALIVE_STATE(N) REMEMBER(_KA_, gcode.busy_state, gcode.N)
#else
#define KEEPALIVE_STATE(N) NOOP
#endif
static void dwell(millis_t time);
private:
#if ENABLED(MARLIN_DEV_MODE)
static void D(const int16_t dcode);
#endif
static void G0_G1(TERN_(HAS_FAST_MOVES, const bool fast_move=false));
#if ENABLED(ARC_SUPPORT)
static void G2_G3(const bool clockwise);
#endif
static void G4();
#if ENABLED(BEZIER_CURVE_SUPPORT)
static void G5();
#endif
#if ENABLED(DIRECT_STEPPING)
static void G6();
#endif
#if ENABLED(FWRETRACT)
static void G10();
static void G11();
#endif
#if ENABLED(NOZZLE_CLEAN_FEATURE)
static void G12();
#endif
#if ENABLED(CNC_WORKSPACE_PLANES)
static void G17();
static void G18();
static void G19();
#endif
#if ENABLED(INCH_MODE_SUPPORT)
static void G20();
static void G21();
#endif
#if ENABLED(G26_MESH_VALIDATION)
static void G26();
#endif
#if ENABLED(NOZZLE_PARK_FEATURE)
static void G27();
#endif
static void G28();
#if HAS_LEVELING
#if ENABLED(G29_RETRY_AND_RECOVER)
static void event_probe_failure();
static void event_probe_recover();
static void G29_with_retry();
#define G29_TYPE bool
#else
#define G29_TYPE void
#endif
static G29_TYPE G29();
#endif
#if HAS_BED_PROBE
static void G30();
#if ENABLED(Z_PROBE_SLED)
static void G31();
static void G32();
#endif
#endif
#if ENABLED(DELTA_AUTO_CALIBRATION)
static void G33();
#endif
#if ANY(Z_MULTI_ENDSTOPS, Z_STEPPER_AUTO_ALIGN, MECHANICAL_GANTRY_CALIBRATION)
static void G34();
#endif
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
static void M422();
#endif
#if ENABLED(ASSISTED_TRAMMING)
static void G35();
#endif
#if ENABLED(G38_PROBE_TARGET)
static void G38(const int8_t subcode);
#endif
#if HAS_MESH
static void G42();
#endif
#if ENABLED(CNC_COORDINATE_SYSTEMS)
static void G53();
static void G54();
static void G55();
static void G56();
static void G57();
static void G58();
static void G59();
#endif
#if ENABLED(PROBE_TEMP_COMPENSATION)
static void G76();
#endif
#if SAVED_POSITIONS
static void G60();
static void G61();
#endif
#if ENABLED(GCODE_MOTION_MODES)
static void G80();
#endif
static void G92();
#if ENABLED(CALIBRATION_GCODE)
static void G425();
#endif
#if HAS_RESUME_CONTINUE
static void M0_M1();
#endif
#if HAS_CUTTER
static void M3_M4(const bool is_M4);
static void M5();
#endif
#if ENABLED(COOLANT_MIST)
static void M7();
#endif
#if EITHER(AIR_ASSIST, COOLANT_FLOOD)
static void M8();
#endif
#if EITHER(AIR_ASSIST, COOLANT_CONTROL)
static void M9();
#endif
#if ENABLED(AIR_EVACUATION)
static void M10();
static void M11();
#endif
#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
static void M12();
#endif
#if ENABLED(EXPECTED_PRINTER_CHECK)
static void M16();
#endif
static void M17();
static void M18_M84();
#if ENABLED(SDSUPPORT)
static void M20();
static void M21();
static void M22();
static void M23();
static void M24();
static void M25();
static void M26();
static void M27();
static void M28();
static void M29();
static void M30();
#endif
static void M31();
#if ENABLED(SDSUPPORT)
#if HAS_MEDIA_SUBCALLS
static void M32();
#endif
#if ENABLED(LONG_FILENAME_HOST_SUPPORT)
static void M33();
#endif
#if BOTH(SDCARD_SORT_ALPHA, SDSORT_GCODE)
static void M34();
#endif
#endif
#if ENABLED(DIRECT_PIN_CONTROL)
static void M42();
#endif
#if ENABLED(PINS_DEBUGGING)
static void M43();
#endif
#if ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST)
static void M48();
#endif
#if ENABLED(LCD_SET_PROGRESS_MANUALLY)
static void M73();
#endif
static void M75();
static void M76();
static void M77();
#if ENABLED(PRINTCOUNTER)
static void M78();
#endif
#if ENABLED(PSU_CONTROL)
static void M80();
#endif
static void M81();
#if HAS_EXTRUDERS
static void M82();
static void M83();
#endif
static void M85();
static void M92();
#if ENABLED(M100_FREE_MEMORY_WATCHER)
static void M100();
#endif
#if HAS_EXTRUDERS
static void M104_M109(const bool isM109);
FORCE_INLINE static void M104() { M104_M109(false); }
FORCE_INLINE static void M109() { M104_M109(true); }
#endif
static void M105();
#if HAS_FAN
static void M106();
static void M107();
#endif
#if DISABLED(EMERGENCY_PARSER)
static void M108();
static void M112();
static void M410();
#if ENABLED(HOST_PROMPT_SUPPORT)
static void M876();
#endif
#endif
static void M110();
static void M111();
#if ENABLED(HOST_KEEPALIVE_FEATURE)
static void M113();
#endif
static void M114();
static void M115();
#if HAS_STATUS_MESSAGE
static void M117();
#endif
static void M118();
static void M119();
static void M120();
static void M121();
#if ENABLED(PARK_HEAD_ON_PAUSE)
static void M125();
#endif
#if ENABLED(BARICUDA)
#if HAS_HEATER_1
static void M126();
static void M127();
#endif
#if HAS_HEATER_2
static void M128();
static void M129();
#endif
#endif
#if HAS_HEATED_BED
static void M140_M190(const bool isM190);
FORCE_INLINE static void M140() { M140_M190(false); }
FORCE_INLINE static void M190() { M140_M190(true); }
#endif
#if HAS_HEATED_CHAMBER
static void M141();
static void M191();
#endif
#if HAS_COOLER
static void M143();
static void M193();
#endif
#if PREHEAT_COUNT
static void M145();
#endif
#if ENABLED(TEMPERATURE_UNITS_SUPPORT)
static void M149();
#endif
#if HAS_COLOR_LEDS
static void M150();
#endif
#if ENABLED(AUTO_REPORT_POSITION)
static void M154();
#endif
#if BOTH(AUTO_REPORT_TEMPERATURES, HAS_TEMP_SENSOR)
static void M155();
#endif
#if ENABLED(MIXING_EXTRUDER)
static void M163();
static void M164();
#if ENABLED(DIRECT_MIXING_IN_G1)
static void M165();
#endif
#if ENABLED(GRADIENT_MIX)
static void M166();
#endif
#endif
static void M200();
static void M201();
#if 0
static void M202(); // Not used for Sprinter/grbl gen6
#endif
static void M203();
static void M204();
static void M205();
#if HAS_M206_COMMAND
static void M206();
#endif
#if ENABLED(FWRETRACT)
static void M207();
static void M208();
#if ENABLED(FWRETRACT_AUTORETRACT)
static void M209();
#endif
#endif
static void M211();
#if HAS_MULTI_EXTRUDER
static void M217();
#endif
#if HAS_HOTEND_OFFSET
static void M218();
#endif
static void M220();
#if HAS_EXTRUDERS
static void M221();
#endif
#if ENABLED(DIRECT_PIN_CONTROL)
static void M226();
#endif
#if ENABLED(PHOTO_GCODE)
static void M240();
#endif
#if HAS_LCD_CONTRAST
static void M250();
#endif
#if ENABLED(EXPERIMENTAL_I2CBUS)
static void M260();
static void M261();
#endif
#if HAS_SERVOS
static void M280();
#if ENABLED(EDITABLE_SERVO_ANGLES)
static void M281();
#endif
#endif
#if ENABLED(BABYSTEPPING)
static void M290();
#endif
#if HAS_BUZZER
static void M300();
#endif
#if ENABLED(PIDTEMP)
static void M301();
#endif
#if ENABLED(PREVENT_COLD_EXTRUSION)
static void M302();
#endif
#if HAS_PID_HEATING
static void M303();
#endif
#if ENABLED(PIDTEMPBED)
static void M304();
#endif
#if HAS_USER_THERMISTORS
static void M305();
#endif
#if ENABLED(PIDTEMPCHAMBER)
static void M309();
#endif
#if HAS_MICROSTEPS
static void M350();
static void M351();
#endif
#if ENABLED(CASE_LIGHT_ENABLE)
static void M355();
#endif
#if ENABLED(REPETIER_GCODE_M360)
static void M360();
#endif
#if ENABLED(MORGAN_SCARA)
static bool M360();
static bool M361();
static bool M362();
static bool M363();
static bool M364();
#endif
#if EITHER(EXT_SOLENOID, MANUAL_SOLENOID_CONTROL)
static void M380();
static void M381();
#endif
static void M400();
#if HAS_BED_PROBE
static void M401();
static void M402();
#endif
#if HAS_PRUSA_MMU2
static void M403();
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
static void M404();
static void M405();
static void M406();
static void M407();
#endif
#if HAS_FILAMENT_SENSOR
static void M412();
#endif
#if HAS_MULTI_LANGUAGE
static void M414();
#endif
#if HAS_LEVELING
static void M420();
static void M421();
#endif
#if ENABLED(BACKLASH_GCODE)
static void M425();
#endif
#if HAS_M206_COMMAND
static void M428();
#endif
#if HAS_POWER_MONITOR
static void M430();
#endif
#if ENABLED(CANCEL_OBJECTS)
static void M486();
#endif
static void M500();
static void M501();
static void M502();
#if DISABLED(DISABLE_M503)
static void M503();
#endif
#if ENABLED(EEPROM_SETTINGS)
static void M504();
#endif
#if ENABLED(PASSWORD_FEATURE)
static void M510();
#if ENABLED(PASSWORD_UNLOCK_GCODE)
static void M511();
#endif
#if ENABLED(PASSWORD_CHANGE_GCODE)
static void M512();
#endif
#endif
#if ENABLED(SDSUPPORT)
static void M524();
#endif
#if ENABLED(SD_ABORT_ON_ENDSTOP_HIT)
static void M540();
#endif
#if HAS_ETHERNET
static void M552();
static void M553();
static void M554();
#endif
#if ENABLED(BAUD_RATE_GCODE)
static void M575();
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
static void M600();
static void M603();
#endif
#if HAS_DUPLICATION_MODE
static void M605();
#endif
#if IS_KINEMATIC
static void M665();
#endif
#if ENABLED(DELTA) || HAS_EXTRA_ENDSTOPS
static void M666();
#endif
#if ENABLED(DUET_SMART_EFFECTOR) && PIN_EXISTS(SMART_EFFECTOR_MOD)
static void M672();
#endif
#if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES)
static void M701();
static void M702();
#endif
#if ENABLED(GCODE_REPEAT_MARKERS)
static void M808();
#endif
#if ENABLED(GCODE_MACROS)
static void M810_819();
#endif
#if HAS_BED_PROBE
static void M851();
#endif
#if ENABLED(SKEW_CORRECTION_GCODE)
static void M852();
#endif
#if ENABLED(I2C_POSITION_ENCODERS)
FORCE_INLINE static void M860() { I2CPEM.M860(); }
FORCE_INLINE static void M861() { I2CPEM.M861(); }
FORCE_INLINE static void M862() { I2CPEM.M862(); }
FORCE_INLINE static void M863() { I2CPEM.M863(); }
FORCE_INLINE static void M864() { I2CPEM.M864(); }
FORCE_INLINE static void M865() { I2CPEM.M865(); }
FORCE_INLINE static void M866() { I2CPEM.M866(); }
FORCE_INLINE static void M867() { I2CPEM.M867(); }
FORCE_INLINE static void M868() { I2CPEM.M868(); }
FORCE_INLINE static void M869() { I2CPEM.M869(); }
#endif
#if ENABLED(PROBE_TEMP_COMPENSATION)
static void M192();
static void M871();
#endif
#if ENABLED(LIN_ADVANCE)
static void M900();
#endif
#if HAS_TRINAMIC_CONFIG
static void M122();
static void M906();
#if HAS_STEALTHCHOP
static void M569();
#endif
#if ENABLED(MONITOR_DRIVER_STATUS)
static void M911();
static void M912();
#endif
#if ENABLED(HYBRID_THRESHOLD)
static void M913();
#endif
#if ENABLED(USE_SENSORLESS)
static void M914();
#endif
#endif
#if HAS_L64XX
static void M122();
static void M906();
static void M916();
static void M917();
static void M918();
#endif
#if ANY(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_PWM, HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC)
static void M907();
#if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC)
static void M908();
#if HAS_MOTOR_CURRENT_DAC
static void M909();
static void M910();
#endif
#endif
#endif
#if ENABLED(SDSUPPORT)
static void M928();
#endif
#if ENABLED(MAGNETIC_PARKING_EXTRUDER)
static void M951();
#endif
#if ENABLED(TOUCH_SCREEN_CALIBRATION)
static void M995();
#endif
#if BOTH(HAS_SPI_FLASH, SDSUPPORT)
static void M993();
static void M994();
#endif
#if ENABLED(PLATFORM_M997_SUPPORT)
static void M997();
#endif
static void M999();
#if ENABLED(POWER_LOSS_RECOVERY)
static void M413();
static void M1000();
#endif
#if ENABLED(SDSUPPORT)
static void M1001();
#endif
#if ENABLED(DGUS_LCD_UI_MKS)
static void M1002();
#endif
#if ENABLED(UBL_MESH_WIZARD)
static void M1004();
#endif
#if ENABLED(MAX7219_GCODE)
static void M7219();
#endif
#if ENABLED(CONTROLLER_FAN_EDITABLE)
static void M710();
#endif
static void T(const int8_t tool_index);
};
extern GcodeSuite gcode;
Reference in New Issue View Git Blame Copy Permalink