97 lines
3.8 KiB
C
97 lines
3.8 KiB
C
/*-----------------------------------------------------------------------
|
|
/ * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
/ * Copyright (c) 2019 BigTreeTech [https://github.com/bigtreetech]
|
|
/ * Low level disk interface module include file (C)ChaN, 2015
|
|
/-----------------------------------------------------------------------*/
|
|
|
|
#pragma once
|
|
|
|
#define _DISKIO_WRITE 1 /* 1: Enable disk_write function */
|
|
#define _DISKIO_IOCTL 1 /* 1: Enable disk_ioctl fucntion */
|
|
#define _DISKIO_ISDIO 0 /* 1: Enable iSDIO control fucntion */
|
|
|
|
typedef unsigned char BYTE;
|
|
typedef unsigned short WORD;
|
|
typedef unsigned long DWORD;
|
|
typedef unsigned int UINT;
|
|
|
|
/* Status of Disk Functions */
|
|
typedef BYTE DSTATUS;
|
|
|
|
/* Results of Disk Functions */
|
|
typedef enum {
|
|
RES_OK = 0, /* 0: Successful */
|
|
RES_ERROR, /* 1: R/W Error */
|
|
RES_WRPRT, /* 2: Write Protected */
|
|
RES_NOTRDY, /* 3: Not Ready */
|
|
RES_PARERR /* 4: Invalid Parameter */
|
|
} DRESULT;
|
|
|
|
|
|
#if _DISKIO_ISDIO
|
|
/* Command structure for iSDIO ioctl command */
|
|
typedef struct {
|
|
BYTE func; /* Function number: 0..7 */
|
|
WORD ndata; /* Number of bytes to transfer: 1..512, or mask + data */
|
|
DWORD addr; /* Register address: 0..0x1FFFF */
|
|
void* data; /* Pointer to the data (to be written | read buffer) */
|
|
} SDIO_CMD;
|
|
#endif
|
|
|
|
/*---------------------------------------*/
|
|
/* Prototypes for disk control functions */
|
|
|
|
DSTATUS disk_initialize(BYTE pdrv);
|
|
DSTATUS disk_status(BYTE pdrv);
|
|
DRESULT disk_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count);
|
|
#if _DISKIO_WRITE
|
|
DRESULT disk_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count);
|
|
#endif
|
|
#if _DISKIO_IOCTL
|
|
DRESULT disk_ioctl(BYTE pdrv, BYTE cmd, void* buff);
|
|
#endif
|
|
|
|
/* Disk Status Bits (DSTATUS) */
|
|
#define STA_NOINIT 0x01 /* Drive not initialized */
|
|
#define STA_NODISK 0x02 /* No medium in the drive */
|
|
#define STA_PROTECT 0x04 /* Write protected */
|
|
|
|
/* Command code for disk_ioctrl fucntion */
|
|
|
|
/* Generic command (Used by FatFs) */
|
|
#define CTRL_SYNC 0 /* Complete pending write process (needed at _FS_READONLY == 0) */
|
|
#define GET_SECTOR_COUNT 1 /* Get media size (needed at _USE_MKFS == 1) */
|
|
#define GET_SECTOR_SIZE 2 /* Get sector size (needed at _MAX_SS != _MIN_SS) */
|
|
#define GET_BLOCK_SIZE 3 /* Get erase block size (needed at _USE_MKFS == 1) */
|
|
#define CTRL_TRIM 4 /* Inform device that the data on the block of sectors is no longer used (needed at _USE_TRIM == 1) */
|
|
|
|
/* Generic command (Not used by FatFs) */
|
|
#define CTRL_FORMAT 5 /* Create physical format on the media */
|
|
#define CTRL_POWER_IDLE 6 /* Put the device idle state */
|
|
#define CTRL_POWER_OFF 7 /* Put the device off state */
|
|
#define CTRL_LOCK 8 /* Lock media removal */
|
|
#define CTRL_UNLOCK 9 /* Unlock media removal */
|
|
#define CTRL_EJECT 10 /* Eject media */
|
|
|
|
/* MMC/SDC specific ioctl command (Not used by FatFs) */
|
|
#define MMC_GET_TYPE 50 /* Get card type */
|
|
#define MMC_GET_CSD 51 /* Get CSD */
|
|
#define MMC_GET_CID 52 /* Get CID */
|
|
#define MMC_GET_OCR 53 /* Get OCR */
|
|
#define MMC_GET_SDSTAT 54 /* Get SD status */
|
|
#define ISDIO_READ 55 /* Read data form SD iSDIO register */
|
|
#define ISDIO_WRITE 56 /* Write data to SD iSDIO register */
|
|
#define ISDIO_MRITE 57 /* Masked write data to SD iSDIO register */
|
|
|
|
/* ATA/CF specific ioctl command (Not used by FatFs) */
|
|
#define ATA_GET_REV 60 /* Get F/W revision */
|
|
#define ATA_GET_MODEL 61 /* Get model name */
|
|
#define ATA_GET_SN 62 /* Get serial number */
|
|
|
|
/* MMC card type flags (MMC_GET_TYPE) */
|
|
#define CT_MMC 0x01 /* MMC ver 3 */
|
|
#define CT_SD1 0x02 /* SD ver 1 */
|
|
#define CT_SD2 0x04 /* SD ver 2 */
|
|
#define CT_SDC (CT_SD1|CT_SD2) /* SD */
|
|
#define CT_BLOCK 0x08 /* Block addressing */
|