Marlin_Firmware/Marlin/pins_A4JP.h
esenapaj f41c60d4a4 Follow-up the PR #4955, etc
・More ANALOG NUMBERING to Analog Input
・Add comment header to all the section of all the pins files

・Sort sections as follows:
1. Some special definitions (USBCON, LARGE_FLASH, etc)
2. Servos
3. Limit Switches
4. Z Probe
5. Steppers
6. Temperature Sensors
7. Heaters / Fans
8. Misc. Functions
9. LCD / Controller

・Move MAX6675_SS into "Temperature Sensors" section
・Adjust spacing
2016-10-10 14:22:43 +09:00

162 lines
4.2 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/************************************************
* Rambo pin assignments MODIFIED FOR A4JP
************************************************/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "AJ4P"
#define LARGE_FLASH true
/************************************************
* Rambo pin assignments old
************************************************/
//
// Servos
//
#define SERVO0_PIN 22 // Motor header MX1
#define SERVO1_PIN 23 // Motor header MX2
#define SERVO2_PIN 24 // Motor header MX3
#define SERVO3_PIN 5 // PWM header pin 5
//
// Limit Switches
//
#define X_MIN_PIN 12
#define X_MAX_PIN 24
#define Y_MIN_PIN 11
#define Y_MAX_PIN 23
#define Z_MIN_PIN 10
#define Z_MAX_PIN 30
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 30
#endif
#define SLED_PIN -1
//
// Steppers
//
#define X_STEP_PIN 37
#define X_DIR_PIN 48
#define X_ENABLE_PIN 29
#define Y_STEP_PIN 36
#define Y_DIR_PIN 49
#define Y_ENABLE_PIN 28
#define Z_STEP_PIN 35
#define Z_DIR_PIN 47
#define Z_ENABLE_PIN 27
#define E0_STEP_PIN 34
#define E0_DIR_PIN 43
#define E0_ENABLE_PIN 26
#define E1_STEP_PIN 33
#define E1_DIR_PIN 42
#define E1_ENABLE_PIN 25
// Microstepping pins - Mapping not from fastio.h (?)
#define X_MS1_PIN 40
#define X_MS2_PIN 41
#define Y_MS1_PIN 69
#define Y_MS2_PIN 39
#define Z_MS1_PIN 68
#define Z_MS2_PIN 67
#define E0_MS1_PIN 65
#define E0_MS2_PIN 66
#define E1_MS1_PIN 63
#define E1_MS2_PIN 64
#define DIGIPOTSS_PIN 38
#define DIGIPOT_CHANNELS {4,5,3,0,1} // X Y Z E0 E1 digipot channels to stepper driver mapping
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // Analog Input
#define TEMP_BED_PIN 7 // Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 9
#define HEATER_1_PIN 7
#define HEATER_BED_PIN 3
#define FAN_PIN 8
#define FAN0_PIN 6
#define FAN1_PIN 2
//
// Misc. Functions
//
#define SDSS 53
#define LED_PIN 13
#define PS_ON_PIN 4
#define FILWIDTH_PIN 3 // Analog Input
//
// LCD / Controller
//
#define LCD_PINS_RS 70 // Ext2_5
#define LCD_PINS_ENABLE 71 // Ext2_7
#define LCD_PINS_D4 72 // Ext2_9 ?
#define LCD_PINS_D5 73 // Ext2_11 ?
#define LCD_PINS_D6 74 // Ext2_13
#define LCD_PINS_D7 75 // Ext2_15 ?
#define BEEPER_PIN -1
#define BTN_HOME 80 // Ext_16
#define BTN_CENTER 81 // Ext_14
#define BTN_ENC BTN_CENTER
#define BTN_RIGHT 82 // Ext_12
#define BTN_LEFT 83 // Ext_10
#define BTN_UP 84 // Ext2_8
#define BTN_DOWN 85 // Ext2_6
#define HOME_PIN BTN_HOME
#if ENABLED(VIKI2) || ENABLED(miniVIKI)
#define BEEPER_PIN 44
// Pins for DOGM SPI LCD Support
#define DOGLCD_A0 70
#define DOGLCD_CS 71
#define LCD_SCREEN_ROT_180
#define SD_DETECT_PIN -1 // Pin 72 if using easy adapter board
#define STAT_LED_RED_PIN 22
#define STAT_LED_BLUE_PIN 32
#endif // VIKI2/miniVIKI