Marlin_Firmware/platformio.ini
Chris Pepper 46b2773e13 General fixes for LPC1768 (#7834)
* fixed some include paths

* LPC1768: Fix Serial API

Add missing serial methods used if TX_BUFFER_SIZE is set
Change return value of HalSerial:read to match Arduino API

* LPC1768: add filters to ADC

This is to try and compensate for hardware issue and oversensitivity to noise

* LPC1768: remove the polling section of delayMicroseconds

* LPC1768: lock usb mass storage device while device accesses it.

Currently only applicable to persistent store,
The device always has priority and will unmount the sd card from the host, Windows then tries to automount again so it can look like the explorer window freezes. Linux Mint, by default, just closes the Nemo window.

* Add timeout to make sure if Serial never connects that Marlin still boots

* Remove unneeded ifdef CPU_32_BIT

In general the need for ifdef CPU_32_BIT blocks means that something is missing from the HAL API or a Platform, in this case HAL_TICKS_PER_US was missing from the AVR Platform

* LPC1768: relocate RE-ARM debug_extra_script.py
2017-10-04 15:40:54 -05:00

185 lines
4.1 KiB
INI

#
# Marlin Firmware
# PlatformIO Configuration File
#
# For detailed documentation with EXAMPLES:
#
# http://docs.platformio.org/en/latest/projectconf.html
#
# Automatic targets - enable auto-uploading
# targets = upload
[platformio]
src_dir = Marlin
envs_dir = .pioenvs
lib_dir = .piolib
libdeps_dir = .piolibdeps
env_default = megaatmega2560
[common]
lib_deps =
U8glib@1.19.1
LiquidCrystal_I2C@1.1.2
https://github.com/lincomatic/LiquidTWI2.git
https://github.com/teemuatlut/TMC2130Stepper.git
https://github.com/trinamic/TMC26XStepper.git
https://github.com/adafruit/Adafruit_NeoPixel.git
https://github.com/ameyer/Arduino-L6470.git
default_src_filter = +<src/*> -<src/config>
#################################
# #
# Unique Core Architectures #
# #
# Add a new "env" below if no #
# entry has values suitable to #
# build for a given board. #
# #
#################################
#
# ATmega2560
#
[env:megaatmega2560]
platform = atmelavr
framework = arduino
board = megaatmega2560
build_flags = -I $BUILDSRC_DIR
board_f_cpu = 16000000L
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# ATmega1280
#
[env:megaatmega1280]
platform = atmelavr
framework = arduino
board = megaatmega1280
build_flags = -I $BUILDSRC_DIR
board_f_cpu = 16000000L
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# Teensy++ 2.0
#
# - PrintrBoard
# - PrintrBoard Rev.F
# - Brainwave Pro
#
[env:teensy20]
platform = teensy
framework = arduino
board = teensy20pp
build_flags = -I $BUILDSRC_DIR
#board_f_cpu = 20000000L ; Bug in Arduino framework disallows boards running at 20Mhz
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# RAMBo
#
[env:rambo]
platform = atmelavr
framework = arduino
board = reprap_rambo
build_flags = -I $BUILDSRC_DIR
board_f_cpu = 16000000L
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# Anet 1.0 - Melzi clone (ATmega1284p)
#
[env:anet10]
platform = atmelavr
framework = arduino
board = sanguino_atmega1284p
upload_speed = 57600
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# Sanguinololu (ATmega644p)
#
[env:sanguino_atmega644p]
platform = atmelavr
framework = arduino
board = sanguino_atmega644p
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# Due (Atmel SAM3X8E ARM Cortex-M3)
#
# - RAMPS4DUE
# - RADDS
#
[env:DUE]
platform = atmelsam
framework = arduino
board = due
build_flags = -I $BUILDSRC_DIR
lib_deps = ${common.lib_deps}
src_filter = ${common.default_src_filter}
#
# Teensy 3.5 / 3.6 (ARM Cortex-M4)
#
[env:teensy35]
platform = teensy
framework = arduino
board = teensy35
build_flags = -I $BUILDSRC_DIR
lib_deps = ${common.lib_deps}
lib_ignore = Adafruit NeoPixel
src_filter = ${common.default_src_filter}
#
# Re-ARM (NXP LPC1768 ARM Cortex-M3)
#
[env:Re-ARM]
platform = nxplpc
board_f_cpu = 100000000L
build_flags = !python Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
src_build_flags = -Wall
build_unflags = -Wall
lib_ldf_mode = off
lib_extra_dirs = frameworks
lib_deps = U8glib-ARM, CMSIS-LPC1768
extra_scripts = Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
src_filter = ${common.default_src_filter}
#
# Re-ARM (for debugging and development)
#
[env:Re-ARM_debug_and_upload]
# Segger JLink
platform = nxplpc
#framework = mbed
board = lpc1768
board_f_cpu = 100000000L
build_flags = !python Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
lib_ldf_mode = off
lib_extra_dirs = frameworks
lib_deps = U8glib-ARM, CMSIS-LPC1768
src_filter = ${common.default_src_filter}
extra_scripts = Marlin/src/HAL/HAL_LPC1768/debug_extra_script.py, Marlin/src/HAL/HAL_LPC1768/lpc1768_flag_script.py
debug_tool = custom
debug_server =
C:\Program Files (x86)\SEGGER\JLink_V618d\JLinkGDBServerCL.exe
-select
USB
-port
2331
-device
LPC1768
-if
JTAG
-speed
auto
-noir