818 lines
24 KiB
C
818 lines
24 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* Arduino Mega with RAMPS v1.4 (or v1.3) pin assignments
|
|
*
|
|
* Applies to the following boards:
|
|
*
|
|
* RAMPS_14_EFB (Hotend, Fan, Bed)
|
|
* RAMPS_14_EEB (Hotend0, Hotend1, Bed)
|
|
* RAMPS_14_EFF (Hotend, Fan0, Fan1)
|
|
* RAMPS_14_EEF (Hotend0, Hotend1, Fan)
|
|
* RAMPS_14_SF (Spindle, Controller Fan)
|
|
*
|
|
* RAMPS_13_EFB (Hotend, Fan, Bed)
|
|
* RAMPS_13_EEB (Hotend0, Hotend1, Bed)
|
|
* RAMPS_13_EFF (Hotend, Fan0, Fan1)
|
|
* RAMPS_13_EEF (Hotend0, Hotend1, Fan)
|
|
* RAMPS_13_SF (Spindle, Controller Fan)
|
|
*
|
|
* Other pins_MYBOARD.h files may override these defaults
|
|
*
|
|
* Differences between
|
|
* RAMPS_13 | RAMPS_14
|
|
* 7 | 11
|
|
*/
|
|
|
|
#if ENABLED(AZSMZ_12864) && DISABLED(ALLOW_SAM3X8E)
|
|
#error "No pins defined for RAMPS with AZSMZ_12864."
|
|
#endif
|
|
|
|
#include "env_validate.h"
|
|
|
|
// Custom flags and defines for the build
|
|
//#define BOARD_CUSTOM_BUILD_FLAGS -D__FOO__
|
|
|
|
#ifndef BOARD_INFO_NAME
|
|
#define BOARD_INFO_NAME "RAMPS 1.4"
|
|
#endif
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#ifndef SERVO0_PIN
|
|
#ifdef IS_RAMPS_13
|
|
#define SERVO0_PIN 7
|
|
#else
|
|
#define SERVO0_PIN 11
|
|
#endif
|
|
#endif
|
|
#ifndef SERVO1_PIN
|
|
#define SERVO1_PIN 6
|
|
#endif
|
|
#ifndef SERVO2_PIN
|
|
#define SERVO2_PIN 5
|
|
#endif
|
|
#ifndef SERVO3_PIN
|
|
#define SERVO3_PIN 4
|
|
#endif
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#ifndef X_STOP_PIN
|
|
#ifndef X_MIN_PIN
|
|
#define X_MIN_PIN 3
|
|
#endif
|
|
#ifndef X_MAX_PIN
|
|
#define X_MAX_PIN 2
|
|
#endif
|
|
#endif
|
|
#ifndef Y_STOP_PIN
|
|
#ifndef Y_MIN_PIN
|
|
#define Y_MIN_PIN 14
|
|
#endif
|
|
#ifndef Y_MAX_PIN
|
|
#define Y_MAX_PIN 15
|
|
#endif
|
|
#endif
|
|
#ifndef Z_STOP_PIN
|
|
#ifndef Z_MIN_PIN
|
|
#define Z_MIN_PIN 18
|
|
#endif
|
|
#ifndef Z_MAX_PIN
|
|
#define Z_MAX_PIN 19
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Z Probe (when not Z_MIN_PIN)
|
|
//
|
|
#ifndef Z_MIN_PROBE_PIN
|
|
#define Z_MIN_PROBE_PIN 32
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 54
|
|
#define X_DIR_PIN 55
|
|
#define X_ENABLE_PIN 38
|
|
#ifndef X_CS_PIN
|
|
#define X_CS_PIN EXP2_07_PIN
|
|
#endif
|
|
|
|
#define Y_STEP_PIN 60
|
|
#define Y_DIR_PIN 61
|
|
#define Y_ENABLE_PIN 56
|
|
#ifndef Y_CS_PIN
|
|
#define Y_CS_PIN EXP2_04_PIN
|
|
#endif
|
|
|
|
#ifndef Z_STEP_PIN
|
|
#define Z_STEP_PIN 46
|
|
#endif
|
|
#define Z_DIR_PIN 48
|
|
#define Z_ENABLE_PIN 62
|
|
#ifndef Z_CS_PIN
|
|
#define Z_CS_PIN 40
|
|
#endif
|
|
|
|
#define E0_STEP_PIN 26
|
|
#define E0_DIR_PIN 28
|
|
#define E0_ENABLE_PIN 24
|
|
#ifndef E0_CS_PIN
|
|
#define E0_CS_PIN 42
|
|
#endif
|
|
|
|
#define E1_STEP_PIN 36
|
|
#define E1_DIR_PIN 34
|
|
#define E1_ENABLE_PIN 30
|
|
#ifndef E1_CS_PIN
|
|
#define E1_CS_PIN 44
|
|
#endif
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#ifndef TEMP_0_PIN
|
|
#define TEMP_0_PIN 13 // Analog Input
|
|
#endif
|
|
#ifndef TEMP_1_PIN
|
|
#define TEMP_1_PIN 15 // Analog Input
|
|
#endif
|
|
#ifndef TEMP_BED_PIN
|
|
#define TEMP_BED_PIN 14 // Analog Input
|
|
#endif
|
|
|
|
//
|
|
// SPI for Max6675 or Max31855 Thermocouple
|
|
//
|
|
#ifndef MAX6675_SS_PIN
|
|
#define MAX6675_SS_PIN 66 // Don't use 53 if using Display/SD card (SDSS) or 49 (SD_DETECT_PIN)
|
|
#endif
|
|
|
|
//
|
|
// Augmentation for auto-assigning RAMPS plugs
|
|
//
|
|
#if NONE(IS_RAMPS_EEB, IS_RAMPS_EEF, IS_RAMPS_EFB, IS_RAMPS_EFF, IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
|
|
#if HAS_MULTI_HOTEND
|
|
#if TEMP_SENSOR_BED
|
|
#define IS_RAMPS_EEB
|
|
#else
|
|
#define IS_RAMPS_EEF
|
|
#endif
|
|
#elif TEMP_SENSOR_BED
|
|
#define IS_RAMPS_EFB
|
|
#else
|
|
#define IS_RAMPS_EFF
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#ifndef MOSFET_D_PIN
|
|
#define MOSFET_D_PIN -1
|
|
#endif
|
|
#ifndef RAMPS_D8_PIN
|
|
#define RAMPS_D8_PIN 8
|
|
#endif
|
|
#ifndef RAMPS_D9_PIN
|
|
#define RAMPS_D9_PIN 9
|
|
#endif
|
|
#ifndef RAMPS_D10_PIN
|
|
#define RAMPS_D10_PIN 10
|
|
#endif
|
|
|
|
#define HEATER_0_PIN RAMPS_D10_PIN
|
|
|
|
#if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed
|
|
#define HEATER_BED_PIN RAMPS_D8_PIN
|
|
#elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan
|
|
#define HEATER_1_PIN RAMPS_D9_PIN
|
|
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
|
|
#define HEATER_1_PIN RAMPS_D9_PIN
|
|
#define HEATER_BED_PIN RAMPS_D8_PIN
|
|
#elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan
|
|
#define FAN1_PIN RAMPS_D8_PIN
|
|
#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE")
|
|
#define HEATER_BED_PIN RAMPS_D8_PIN
|
|
#if HOTENDS == 1
|
|
#define FAN1_PIN MOSFET_D_PIN
|
|
#else
|
|
#define HEATER_1_PIN MOSFET_D_PIN
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef FAN_PIN
|
|
#if EITHER(IS_RAMPS_EFB, IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan
|
|
#define FAN_PIN RAMPS_D9_PIN
|
|
#elif EITHER(IS_RAMPS_EEF, IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan
|
|
#define FAN_PIN RAMPS_D8_PIN
|
|
#elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed
|
|
#define FAN_PIN 4 // IO pin. Buffer needed
|
|
#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE")
|
|
#define FAN_PIN RAMPS_D9_PIN
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Misc. Functions
|
|
//
|
|
#ifndef SDSS
|
|
#define SDSS EXP2_07_PIN
|
|
#endif
|
|
#define LED_PIN 13
|
|
|
|
#ifndef FILWIDTH_PIN
|
|
#define FILWIDTH_PIN 5 // Analog Input on AUX2
|
|
#endif
|
|
|
|
// RAMPS 1.4 DIO 4 on the servos connector
|
|
#ifndef FIL_RUNOUT_PIN
|
|
#define FIL_RUNOUT_PIN 4
|
|
#endif
|
|
|
|
#ifndef PS_ON_PIN
|
|
#define PS_ON_PIN 12
|
|
#endif
|
|
|
|
#if ENABLED(CASE_LIGHT_ENABLE) && !defined(CASE_LIGHT_PIN) && !defined(SPINDLE_LASER_ENA_PIN)
|
|
#if NUM_SERVOS <= 1 // Prefer the servo connector
|
|
#define CASE_LIGHT_PIN 6 // Hardware PWM
|
|
#elif HAS_FREE_AUX2_PINS
|
|
#define CASE_LIGHT_PIN 44 // Hardware PWM
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// M3/M4/M5 - Spindle/Laser Control
|
|
//
|
|
#if HAS_CUTTER && !defined(SPINDLE_LASER_ENA_PIN)
|
|
#if !NUM_SERVOS // Use servo connector if possible
|
|
#define SPINDLE_LASER_ENA_PIN 4 // Pullup or pulldown!
|
|
#define SPINDLE_LASER_PWM_PIN 6 // Hardware PWM
|
|
#define SPINDLE_DIR_PIN 5
|
|
#elif HAS_FREE_AUX2_PINS
|
|
#define SPINDLE_LASER_ENA_PIN 40 // Pullup or pulldown!
|
|
#define SPINDLE_LASER_PWM_PIN 44 // Hardware PWM
|
|
#define SPINDLE_DIR_PIN 65
|
|
#else
|
|
#error "No auto-assignable Spindle/Laser pins available."
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// TMC software SPI
|
|
//
|
|
#if ENABLED(TMC_USE_SW_SPI)
|
|
#ifndef TMC_SW_MOSI
|
|
#define TMC_SW_MOSI 66
|
|
#endif
|
|
#ifndef TMC_SW_MISO
|
|
#define TMC_SW_MISO 44
|
|
#endif
|
|
#ifndef TMC_SW_SCK
|
|
#define TMC_SW_SCK 64
|
|
#endif
|
|
#endif
|
|
|
|
#if HAS_TMC_UART
|
|
/**
|
|
* TMC2208/TMC2209 stepper drivers
|
|
*
|
|
* Hardware serial communication ports.
|
|
* If undefined software serial is used according to the pins below
|
|
*
|
|
* Serial2 -- AUX-4 Pin 18 (D16 TX2) and AUX-4 Pin 17 (D17 RX2)
|
|
* Serial1 -- Pins D18 and D19 are used for Z-MIN and Z-MAX
|
|
*/
|
|
//#define X_HARDWARE_SERIAL Serial1
|
|
//#define X2_HARDWARE_SERIAL Serial1
|
|
//#define Y_HARDWARE_SERIAL Serial1
|
|
//#define Y2_HARDWARE_SERIAL Serial1
|
|
//#define Z_HARDWARE_SERIAL Serial1
|
|
//#define Z2_HARDWARE_SERIAL Serial1
|
|
//#define E0_HARDWARE_SERIAL Serial1
|
|
//#define E1_HARDWARE_SERIAL Serial1
|
|
//#define E2_HARDWARE_SERIAL Serial1
|
|
//#define E3_HARDWARE_SERIAL Serial1
|
|
//#define E4_HARDWARE_SERIAL Serial1
|
|
|
|
//
|
|
// Software serial
|
|
//
|
|
|
|
#ifndef X_SERIAL_TX_PIN
|
|
#define X_SERIAL_TX_PIN 40
|
|
#endif
|
|
#ifndef X_SERIAL_RX_PIN
|
|
#define X_SERIAL_RX_PIN 63
|
|
#endif
|
|
#ifndef X2_SERIAL_TX_PIN
|
|
#define X2_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef X2_SERIAL_RX_PIN
|
|
#define X2_SERIAL_RX_PIN -1
|
|
#endif
|
|
|
|
#ifndef Y_SERIAL_TX_PIN
|
|
#define Y_SERIAL_TX_PIN 59
|
|
#endif
|
|
#ifndef Y_SERIAL_RX_PIN
|
|
#define Y_SERIAL_RX_PIN 64
|
|
#endif
|
|
#ifndef Y2_SERIAL_TX_PIN
|
|
#define Y2_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef Y2_SERIAL_RX_PIN
|
|
#define Y2_SERIAL_RX_PIN -1
|
|
#endif
|
|
|
|
#ifndef Z_SERIAL_TX_PIN
|
|
#define Z_SERIAL_TX_PIN 42
|
|
#endif
|
|
#ifndef Z_SERIAL_RX_PIN
|
|
#define Z_SERIAL_RX_PIN 65
|
|
#endif
|
|
#ifndef Z2_SERIAL_TX_PIN
|
|
#define Z2_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef Z2_SERIAL_RX_PIN
|
|
#define Z2_SERIAL_RX_PIN -1
|
|
#endif
|
|
|
|
#ifndef E0_SERIAL_TX_PIN
|
|
#define E0_SERIAL_TX_PIN 44
|
|
#endif
|
|
#ifndef E0_SERIAL_RX_PIN
|
|
#define E0_SERIAL_RX_PIN 66
|
|
#endif
|
|
#ifndef E1_SERIAL_TX_PIN
|
|
#define E1_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E1_SERIAL_RX_PIN
|
|
#define E1_SERIAL_RX_PIN -1
|
|
#endif
|
|
#ifndef E2_SERIAL_TX_PIN
|
|
#define E2_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E2_SERIAL_RX_PIN
|
|
#define E2_SERIAL_RX_PIN -1
|
|
#endif
|
|
#ifndef E3_SERIAL_TX_PIN
|
|
#define E3_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E3_SERIAL_RX_PIN
|
|
#define E3_SERIAL_RX_PIN -1
|
|
#endif
|
|
#ifndef E4_SERIAL_TX_PIN
|
|
#define E4_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E4_SERIAL_RX_PIN
|
|
#define E4_SERIAL_RX_PIN -1
|
|
#endif
|
|
#ifndef E5_SERIAL_TX_PIN
|
|
#define E5_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E5_SERIAL_RX_PIN
|
|
#define E5_SERIAL_RX_PIN -1
|
|
#endif
|
|
#ifndef E6_SERIAL_TX_PIN
|
|
#define E6_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E6_SERIAL_RX_PIN
|
|
#define E6_SERIAL_RX_PIN -1
|
|
#endif
|
|
#ifndef E7_SERIAL_TX_PIN
|
|
#define E7_SERIAL_TX_PIN -1
|
|
#endif
|
|
#ifndef E7_SERIAL_RX_PIN
|
|
#define E7_SERIAL_RX_PIN -1
|
|
#endif
|
|
#endif
|
|
|
|
//
|
|
// Průša i3 MK2 Multiplexer Support
|
|
//
|
|
#ifndef E_MUX0_PIN
|
|
#define E_MUX0_PIN 40 // Z_CS_PIN
|
|
#endif
|
|
#ifndef E_MUX1_PIN
|
|
#define E_MUX1_PIN 42 // E0_CS_PIN
|
|
#endif
|
|
#ifndef E_MUX2_PIN
|
|
#define E_MUX2_PIN 44 // E1_CS_PIN
|
|
#endif
|
|
|
|
//
|
|
// Aux 3 GND D52 D50 5V
|
|
// NC D53 D51 D49
|
|
|
|
//
|
|
// Aux 4 D16 D17 D23 D25 D27 D29 D31 D33 D35 D37 D39 D41 D43 D45 D47 D32 GND 5V
|
|
//
|
|
|
|
/**
|
|
* LCD adapter. Please note: These comes in two variants. The socket keys can be
|
|
* on either side, and may be backwards on some boards / displays.
|
|
* _____ _____
|
|
* D37 |10 9 | D35 (MISO) D50 |10 9 | D52 (SCK)
|
|
* D17 | 8 7 | D16 D31 | 8 7 | D53
|
|
* D23 6 5 D25 D33 6 5 D51 (MOSI)
|
|
* D27 | 4 3 | D29 D49 | 4 3 | D41
|
|
* GND | 2 1 | 5V GND | 2 1 | NC
|
|
* ----- -----
|
|
* EXP1 EXP2
|
|
*/
|
|
|
|
#ifndef EXP1_03_PIN
|
|
#define EXP1_03_PIN 29
|
|
#define EXP1_04_PIN 27
|
|
#define EXP1_05_PIN 25
|
|
#define EXP1_06_PIN 23
|
|
#define EXP1_07_PIN 16
|
|
#define EXP1_08_PIN 17
|
|
#define EXP1_09_PIN 35
|
|
#define EXP1_10_PIN 37
|
|
|
|
#define EXP2_03_PIN 41
|
|
#define EXP2_04_PIN 49
|
|
#define EXP2_05_PIN 51
|
|
#define EXP2_06_PIN 33
|
|
#define EXP2_07_PIN 53
|
|
#define EXP2_08_PIN 31
|
|
#define EXP2_09_PIN 52
|
|
#define EXP2_10_PIN 50
|
|
#endif
|
|
|
|
//////////////////////////
|
|
// LCDs and Controllers //
|
|
//////////////////////////
|
|
|
|
// GLCD features
|
|
// Uncomment screen orientation
|
|
//#define LCD_SCREEN_ROT_90
|
|
//#define LCD_SCREEN_ROT_180
|
|
//#define LCD_SCREEN_ROT_270
|
|
|
|
#if HAS_WIRED_LCD
|
|
|
|
//
|
|
// LCD Display output pins
|
|
//
|
|
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
|
|
|
#define LCD_PINS_RS EXP2_04_PIN // CS chip select /SS chip slave select
|
|
#define LCD_PINS_ENABLE EXP2_05_PIN // SID (MOSI)
|
|
#define LCD_PINS_D4 EXP2_09_PIN // SCK (CLK) clock
|
|
|
|
#elif BOTH(IS_NEWPANEL, PANEL_ONE)
|
|
|
|
#define LCD_PINS_RS 40
|
|
#define LCD_PINS_ENABLE 42
|
|
#define LCD_PINS_D4 65
|
|
#define LCD_PINS_D5 66
|
|
#define LCD_PINS_D6 44
|
|
#define LCD_PINS_D7 64
|
|
|
|
#elif ENABLED(TFTGLCD_PANEL_SPI)
|
|
|
|
#define TFTGLCD_CS EXP2_06_PIN
|
|
|
|
#else
|
|
|
|
#if ENABLED(CR10_STOCKDISPLAY)
|
|
|
|
#define LCD_PINS_RS EXP1_04_PIN
|
|
#define LCD_PINS_ENABLE EXP1_03_PIN
|
|
#define LCD_PINS_D4 EXP1_05_PIN
|
|
|
|
#if !IS_NEWPANEL
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
#endif
|
|
|
|
#elif ENABLED(ZONESTAR_LCD)
|
|
|
|
#error "CAUTION! ZONESTAR_LCD on RAMPS requires wiring modifications. It plugs into AUX2 but GND and 5V need to be swapped. Comment out this line to continue."
|
|
#define LCD_PINS_RS 64
|
|
#define LCD_PINS_ENABLE 44
|
|
#define LCD_PINS_D4 63
|
|
#define LCD_PINS_D5 40
|
|
#define LCD_PINS_D6 42
|
|
#define LCD_PINS_D7 65
|
|
|
|
#else
|
|
|
|
#if EITHER(MKS_12864OLED, MKS_12864OLED_SSD1306)
|
|
#define LCD_PINS_DC EXP1_05_PIN // Set as output on init
|
|
#define LCD_PINS_RS EXP1_04_PIN // Pull low for 1s to init
|
|
// DOGM SPI LCD Support
|
|
#define DOGLCD_A0 LCD_PINS_DC
|
|
#define DOGLCD_CS EXP1_07_PIN
|
|
#define DOGLCD_MOSI EXP1_08_PIN
|
|
#define DOGLCD_SCK EXP1_06_PIN
|
|
#else
|
|
#define LCD_PINS_RS EXP1_07_PIN
|
|
#define LCD_PINS_ENABLE EXP1_08_PIN
|
|
#define LCD_PINS_D4 EXP1_06_PIN
|
|
#define LCD_PINS_D5 EXP1_05_PIN
|
|
#define LCD_PINS_D6 EXP1_04_PIN
|
|
#endif
|
|
|
|
#define LCD_PINS_D7 EXP1_03_PIN
|
|
|
|
#if !IS_NEWPANEL
|
|
#define BEEPER_PIN EXP2_06_PIN
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#if !IS_NEWPANEL
|
|
// Buttons attached to a shift register
|
|
// Not wired yet
|
|
//#define SHIFT_CLK_PIN 38
|
|
//#define SHIFT_LD_PIN 42
|
|
//#define SHIFT_OUT_PIN 40
|
|
//#define SHIFT_EN_PIN EXP1_08_PIN
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
|
|
#define BTN_ENC_EN LCD_PINS_D7 // Detect the presence of the encoder
|
|
#endif
|
|
|
|
//
|
|
// LCD Display input pins
|
|
//
|
|
#if IS_NEWPANEL
|
|
|
|
#if IS_RRD_SC
|
|
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
|
|
#if ENABLED(CR10_STOCKDISPLAY)
|
|
#define BTN_EN1 EXP1_08_PIN
|
|
#define BTN_EN2 EXP1_06_PIN
|
|
#else
|
|
#define BTN_EN1 EXP2_08_PIN
|
|
#define BTN_EN2 EXP2_06_PIN
|
|
#endif
|
|
|
|
#define BTN_ENC EXP1_09_PIN
|
|
#ifndef SD_DETECT_PIN
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
#endif
|
|
#ifndef KILL_PIN
|
|
#define KILL_PIN EXP2_03_PIN
|
|
#endif
|
|
|
|
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
|
#define LCD_BACKLIGHT_PIN 39
|
|
#endif
|
|
|
|
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
|
|
|
#define BTN_EN1 64
|
|
#define BTN_EN2 59
|
|
#define BTN_ENC 63
|
|
#define SD_DETECT_PIN 42
|
|
|
|
#elif ENABLED(LCD_I2C_PANELOLU2)
|
|
|
|
#define BTN_EN1 47
|
|
#define BTN_EN2 43
|
|
#define BTN_ENC 32
|
|
#define LCD_SDSS SDSS
|
|
#define KILL_PIN EXP2_03_PIN
|
|
|
|
#elif ENABLED(LCD_I2C_VIKI)
|
|
|
|
#define BTN_EN1 40 // https://files.panucatt.com/datasheets/viki_wiring_diagram.pdf explains 40/42.
|
|
#define BTN_EN2 42
|
|
#define BTN_ENC -1
|
|
|
|
#define LCD_SDSS SDSS
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
|
|
#elif ANY(VIKI2, miniVIKI)
|
|
|
|
#define DOGLCD_CS 45
|
|
#define DOGLCD_A0 44
|
|
#define LCD_SCREEN_ROT_180
|
|
|
|
#define BEEPER_PIN EXP2_06_PIN
|
|
#define STAT_LED_RED_PIN 32
|
|
#define STAT_LED_BLUE_PIN EXP1_09_PIN
|
|
|
|
#define BTN_EN1 22
|
|
#define BTN_EN2 7
|
|
#define BTN_ENC 39
|
|
|
|
#define SD_DETECT_PIN -1 // Pin 49 for display SD interface, 72 for easy adapter board
|
|
#define KILL_PIN EXP2_08_PIN
|
|
|
|
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
|
|
|
#define DOGLCD_CS EXP1_03_PIN
|
|
#define DOGLCD_A0 EXP1_04_PIN
|
|
|
|
#define BEEPER_PIN EXP1_06_PIN
|
|
#define LCD_BACKLIGHT_PIN EXP2_06_PIN
|
|
|
|
#define BTN_EN1 EXP1_09_PIN
|
|
#define BTN_EN2 EXP1_10_PIN
|
|
#define BTN_ENC EXP2_08_PIN
|
|
|
|
#define LCD_SDSS SDSS
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
#define KILL_PIN EXP2_03_PIN
|
|
|
|
#elif EITHER(MKS_MINI_12864, FYSETC_MINI_12864)
|
|
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
#define BTN_ENC EXP1_09_PIN
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
|
|
#ifndef KILL_PIN
|
|
#define KILL_PIN EXP2_03_PIN
|
|
#endif
|
|
|
|
#if ENABLED(MKS_MINI_12864)
|
|
|
|
#define DOGLCD_A0 EXP1_04_PIN
|
|
#define DOGLCD_CS EXP1_05_PIN
|
|
|
|
// not connected to a pin
|
|
#define LCD_BACKLIGHT_PIN -1 // 65 (MKS mini12864 can't adjust backlight by software!)
|
|
|
|
#define BTN_EN1 EXP2_08_PIN
|
|
#define BTN_EN2 EXP2_06_PIN
|
|
|
|
#elif ENABLED(FYSETC_MINI_12864)
|
|
|
|
// From https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
|
|
|
#define DOGLCD_A0 EXP1_07_PIN
|
|
#define DOGLCD_CS EXP1_08_PIN
|
|
|
|
#define BTN_EN1 EXP2_06_PIN
|
|
#define BTN_EN2 EXP2_08_PIN
|
|
|
|
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
|
|
// results in LCD soft SPI mode 3, SD soft SPI mode 0
|
|
|
|
#define LCD_RESET_PIN EXP1_06_PIN // Must be high or open for LCD to operate normally.
|
|
|
|
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
|
|
#ifndef RGB_LED_R_PIN
|
|
#define RGB_LED_R_PIN EXP1_05_PIN
|
|
#endif
|
|
#ifndef RGB_LED_G_PIN
|
|
#define RGB_LED_G_PIN EXP1_04_PIN
|
|
#endif
|
|
#ifndef RGB_LED_B_PIN
|
|
#define RGB_LED_B_PIN EXP1_03_PIN
|
|
#endif
|
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
|
#define NEOPIXEL_PIN EXP1_05_PIN
|
|
#endif
|
|
|
|
#endif
|
|
|
|
#elif ENABLED(MINIPANEL)
|
|
|
|
#define BEEPER_PIN 42
|
|
// not connected to a pin
|
|
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
|
|
|
|
#define DOGLCD_A0 44
|
|
#define DOGLCD_CS 66
|
|
|
|
#define BTN_EN1 40
|
|
#define BTN_EN2 63
|
|
#define BTN_ENC 59
|
|
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
#define KILL_PIN 64
|
|
|
|
#elif ENABLED(ZONESTAR_LCD)
|
|
|
|
#define ADC_KEYPAD_PIN 12
|
|
|
|
#elif ENABLED(AZSMZ_12864)
|
|
|
|
// Pins only defined for RAMPS_SMART currently
|
|
|
|
#elif IS_TFTGLCD_PANEL
|
|
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
|
|
#else
|
|
|
|
// Beeper on AUX-4
|
|
#define BEEPER_PIN EXP2_06_PIN
|
|
|
|
// Buttons are directly attached to AUX-2
|
|
#if ENABLED(PANEL_ONE)
|
|
#define BTN_EN1 59 // AUX2 PIN 3
|
|
#define BTN_EN2 63 // AUX2 PIN 4
|
|
#define BTN_ENC EXP2_04_PIN
|
|
#else
|
|
#define BTN_EN1 EXP1_10_PIN
|
|
#define BTN_EN2 EXP1_09_PIN
|
|
#define BTN_ENC EXP2_08_PIN
|
|
#endif
|
|
|
|
#if ENABLED(G3D_PANEL)
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
#define KILL_PIN EXP2_03_PIN
|
|
#endif
|
|
|
|
#endif
|
|
#endif // IS_NEWPANEL
|
|
|
|
#endif // HAS_WIRED_LCD
|
|
|
|
#if IS_RRW_KEYPAD && !HAS_ADC_BUTTONS
|
|
#define SHIFT_OUT_PIN 40
|
|
#define SHIFT_CLK_PIN 44
|
|
#define SHIFT_LD_PIN 42
|
|
#ifndef BTN_EN1
|
|
#define BTN_EN1 64
|
|
#endif
|
|
#ifndef BTN_EN2
|
|
#define BTN_EN2 59
|
|
#endif
|
|
#ifndef BTN_ENC
|
|
#define BTN_ENC 63
|
|
#endif
|
|
#endif
|
|
|
|
#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050)
|
|
|
|
#error "CAUTION! LCD_FYSETC_TFT81050 requires wiring modifications. See 'pins_RAMPS.h' for details. Comment out this line to continue."
|
|
|
|
/**
|
|
* FYSETC TFT-81050 display pinout
|
|
*
|
|
* Board Display
|
|
* _____ _____
|
|
* (SCK) D52 | 1 2 | D50 (MISO) MISO | 1 2 | SCK
|
|
* (SD_CS) D53 | 3 4 | D33 (BNT_EN2) (BNT_EN2) MOD_RESET | 3 4 | SD_CS
|
|
* (MOSI) D51 | 5 6 D31 (BNT_EN1) (BNT_EN1) LCD_CS | 5 6 MOSI
|
|
* RESET | 7 8 | D49 (SD_DET) SD_DET | 7 8 | RESET
|
|
* NC | 9 10| GND GND | 9 10| 5V
|
|
* ----- -----
|
|
* EXP2 EXP1
|
|
*
|
|
* Needs custom cable:
|
|
*
|
|
* Board Adapter Display
|
|
* _________
|
|
* EXP2-1 ----------- EXP1-10
|
|
* EXP2-2 ----------- EXP1-9
|
|
* EXP2-4 ----------- EXP1-8
|
|
* EXP2-4 ----------- EXP1-7
|
|
* EXP2-3 ----------- EXP1-6
|
|
* EXP2-6 ----------- EXP1-5
|
|
* EXP2-7 ----------- EXP1-4
|
|
* EXP2-8 ----------- EXP1-3
|
|
* EXP2-1 ----------- EXP1-2
|
|
* EXP1-10 ---------- EXP1-1
|
|
*
|
|
* NOTE: The MISO pin should not get a 5V signal.
|
|
* To fix, insert a 1N4148 diode in the MISO line.
|
|
*/
|
|
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
|
|
#define SD_DETECT_PIN EXP2_04_PIN
|
|
|
|
#define CLCD_MOD_RESET EXP2_08_PIN
|
|
#define CLCD_SPI_CS EXP2_06_PIN
|
|
#endif // TOUCH_UI_FTDI_EVE && LCD_FYSETC_TFT81050
|