Marlin_Firmware

cardreader.cpp

The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.

2012-12-12 11:47:03 +01:00

cardreader.h

The big LCD code update. This splits the display and menu implementation. Paving the way for future different displays. It also makes it easier to modify the menu structures while keeping everything consistant. Note that this most likely breaks the translations, which need to be updated.

2012-12-12 11:47:03 +01:00

Configuration_adv.h

Fix typo in MANUAL_HOME_POSITION (plural S missing) and improve comments.

2012-12-11 01:54:40 -08:00

Configuration.h

Add PID functional range setting. With high powered heaters the current functional range of 10 degrees causes high overshoots as the PID needs to kick in before the temperature hits 10 degrees below target.

2012-12-12 09:08:37 +01:00

ConfigurationStore.cpp

…

ConfigurationStore.h

Changed the naming of some LCD functions, so the names match better what the function does. Also moved around some prototypes for general cleanup.

2012-12-03 12:52:00 +01:00

COPYING

…

create_speed_lookuptable.py

…

createTemperatureLookupMarlin.py

…

fastio.h

Use the same fastio.h definition for AT90USB1286/7 and AT90USB646/7.

2012-12-08 15:16:38 -08:00

language.h

Add german MSG_RESUMING.

2012-12-25 20:53:11 +01:00

LCD Menu Tree.pdf

…

LiquidCrystalRus.cpp

…

LiquidCrystalRus.h

…

Makefile

makefile for sanguino standalone compilation

2013-01-07 11:08:10 +01:00

Marlin_main.cpp

Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.

2012-12-21 16:14:47 +01:00

Marlin.h

Fix compiling for Arduin < 1.0.0

2012-12-13 13:24:55 +01:00

Marlin.pde

Mistake there, not sure why I did that. My bad.

2012-12-05 20:23:13 +01:00

MarlinSerial.cpp

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

MarlinSerial.h

Stop redefining MOTHERBOARD and #define AT90USB instead. Also put #ifndef AT90USB around the HardwareSerial_h trick, so now Printrboard / Brainwave support compiles on Arduino 1.0.2 as well.

2012-12-09 01:32:09 -08:00

Menu Plans.xlsx

…

motion_control.cpp

…

motion_control.h

…

pins.h

Merge pull request #350 from jcrocholl/Marlin_v1

2012-12-17 02:16:31 -08:00

planner.cpp

fixed pwm generation at pin D12 and D13 when one of them is used as FAN_PIN on Sanguino, added soft pwm entry for FAN_PIN in temperature.cpp

2012-12-16 01:36:57 +01:00

planner.h

…

Sd2Card.cpp

…

Sd2Card.h

…

Sd2PinMap.h

…

SdBaseFile.cpp

…

SdBaseFile.h

…

SdFatConfig.h

…

SdFatStructs.h

…

SdFatUtil.cpp

…

SdFatUtil.h

…

SdFile.cpp

…

SdFile.h

…

SdInfo.h

…

SdVolume.cpp

…

SdVolume.h

…

speed_lookuptable.h

…

stepper.cpp

Merge branch 'Marlin_v1' of github.com:ErikZalm/Marlin into Marlin_v1

2012-12-09 23:46:42 +01:00

stepper.h

…

temperature.cpp

Replace the 1ms delay for 2 nops to get a 100ns delay. #259

2012-12-17 11:12:11 +01:00

temperature.h

Big temperature code update. No longer converts back and forwards between temperature and raw sample value. Reducing complexity, removing code. Also named some variables better. While keeping the safety intact and functionality the same.

2012-12-09 23:00:06 +01:00

thermistortables.h

Fixed #336

2012-12-12 13:08:26 +01:00

ultralcd_implementation_hitachi_HD44780.h

Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.

2012-12-21 16:14:47 +01:00

ultralcd.cpp

Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.

2012-12-21 16:14:47 +01:00

ultralcd.h

Small changes on the LCD panel, let the speed control work better, line up the parameter edit the same as the menu, remove some unused defines, and remove the Z from the 10mm move menu.

2012-12-21 16:14:47 +01:00

watchdog.cpp

Fix compiling the watchdog error message when the manual reset watchdog is used.

2012-12-06 10:27:50 +01:00

watchdog.h

…