Marlin_Firmware/frameworks/CMSIS/LPC1768/include/lpc17xx_ssp.h

473 lines
18 KiB
C

/**********************************************************************
* $Id$ lpc17xx_ssp.h 2010-06-18
*//**
* @file lpc17xx_ssp.h
* @brief Contains all macro definitions and function prototypes
* support for SSP firmware library on LPC17xx
* @version 3.0
* @date 18. June. 2010
* @author NXP MCU SW Application Team
*
* Copyright(C) 2010, NXP Semiconductor
* All rights reserved.
*
***********************************************************************
* Software that is described herein is for illustrative purposes only
* which provides customers with programming information regarding the
* products. This software is supplied "AS IS" without any warranties.
* NXP Semiconductors assumes no responsibility or liability for the
* use of the software, conveys no license or title under any patent,
* copyright, or mask work right to the product. NXP Semiconductors
* reserves the right to make changes in the software without
* notification. NXP Semiconductors also make no representation or
* warranty that such application will be suitable for the specified
* use without further testing or modification.
* Permission to use, copy, modify, and distribute this software and its
* documentation is hereby granted, under NXP Semiconductors'
* relevant copyright in the software, without fee, provided that it
* is used in conjunction with NXP Semiconductors microcontrollers. This
* copyright, permission, and disclaimer notice must appear in all copies of
* this code.
**********************************************************************/
/* Peripheral group ----------------------------------------------------------- */
/** @defgroup SSP SSP (Synchronous Serial Port)
* @ingroup LPC1700CMSIS_FwLib_Drivers
* @{
*/
#ifndef LPC17XX_SSP_H_
#define LPC17XX_SSP_H_
/* Includes ------------------------------------------------------------------- */
#include "LPC17xx.h"
#include "lpc_types.h"
#ifdef __cplusplus
extern "C"
{
#endif
/* Public Macros -------------------------------------------------------------- */
/** @defgroup SSP_Public_Macros SSP Public Macros
* @{
*/
/*********************************************************************//**
* SSP configuration parameter defines
**********************************************************************/
/** Clock phase control bit */
#define SSP_CPHA_FIRST ((uint32_t)(0))
#define SSP_CPHA_SECOND SSP_CR0_CPHA_SECOND
/** Clock polarity control bit */
/* There's no bug here!!!
* - If bit[6] in SSPnCR0 is 0: SSP controller maintains the bus clock low between frames.
* That means the active clock is in HI state.
* - If bit[6] in SSPnCR0 is 1 (SSP_CR0_CPOL_HI): SSP controller maintains the bus clock
* high between frames. That means the active clock is in LO state.
*/
#define SSP_CPOL_HI ((uint32_t)(0))
#define SSP_CPOL_LO SSP_CR0_CPOL_HI
/** SSP master mode enable */
#define SSP_SLAVE_MODE SSP_CR1_SLAVE_EN
#define SSP_MASTER_MODE ((uint32_t)(0))
/** SSP data bit number defines */
#define SSP_DATABIT_4 SSP_CR0_DSS(4) /*!< Databit number = 4 */
#define SSP_DATABIT_5 SSP_CR0_DSS(5) /*!< Databit number = 5 */
#define SSP_DATABIT_6 SSP_CR0_DSS(6) /*!< Databit number = 6 */
#define SSP_DATABIT_7 SSP_CR0_DSS(7) /*!< Databit number = 7 */
#define SSP_DATABIT_8 SSP_CR0_DSS(8) /*!< Databit number = 8 */
#define SSP_DATABIT_9 SSP_CR0_DSS(9) /*!< Databit number = 9 */
#define SSP_DATABIT_10 SSP_CR0_DSS(10) /*!< Databit number = 10 */
#define SSP_DATABIT_11 SSP_CR0_DSS(11) /*!< Databit number = 11 */
#define SSP_DATABIT_12 SSP_CR0_DSS(12) /*!< Databit number = 12 */
#define SSP_DATABIT_13 SSP_CR0_DSS(13) /*!< Databit number = 13 */
#define SSP_DATABIT_14 SSP_CR0_DSS(14) /*!< Databit number = 14 */
#define SSP_DATABIT_15 SSP_CR0_DSS(15) /*!< Databit number = 15 */
#define SSP_DATABIT_16 SSP_CR0_DSS(16) /*!< Databit number = 16 */
/** SSP Frame Format definition */
/** Motorola SPI mode */
#define SSP_FRAME_SPI SSP_CR0_FRF_SPI
/** TI synchronous serial mode */
#define SSP_FRAME_TI SSP_CR0_FRF_TI
/** National Micro-wire mode */
#define SSP_FRAME_MICROWIRE SSP_CR0_FRF_MICROWIRE
/*********************************************************************//**
* SSP Status defines
**********************************************************************/
/** SSP status TX FIFO Empty bit */
#define SSP_STAT_TXFIFO_EMPTY SSP_SR_TFE
/** SSP status TX FIFO not full bit */
#define SSP_STAT_TXFIFO_NOTFULL SSP_SR_TNF
/** SSP status RX FIFO not empty bit */
#define SSP_STAT_RXFIFO_NOTEMPTY SSP_SR_RNE
/** SSP status RX FIFO full bit */
#define SSP_STAT_RXFIFO_FULL SSP_SR_RFF
/** SSP status SSP Busy bit */
#define SSP_STAT_BUSY SSP_SR_BSY
/*********************************************************************//**
* SSP Interrupt Configuration defines
**********************************************************************/
/** Receive Overrun */
#define SSP_INTCFG_ROR SSP_IMSC_ROR
/** Receive TimeOut */
#define SSP_INTCFG_RT SSP_IMSC_RT
/** Rx FIFO is at least half full */
#define SSP_INTCFG_RX SSP_IMSC_RX
/** Tx FIFO is at least half empty */
#define SSP_INTCFG_TX SSP_IMSC_TX
/*********************************************************************//**
* SSP Configured Interrupt Status defines
**********************************************************************/
/** Receive Overrun */
#define SSP_INTSTAT_ROR SSP_MIS_ROR
/** Receive TimeOut */
#define SSP_INTSTAT_RT SSP_MIS_RT
/** Rx FIFO is at least half full */
#define SSP_INTSTAT_RX SSP_MIS_RX
/** Tx FIFO is at least half empty */
#define SSP_INTSTAT_TX SSP_MIS_TX
/*********************************************************************//**
* SSP Raw Interrupt Status defines
**********************************************************************/
/** Receive Overrun */
#define SSP_INTSTAT_RAW_ROR SSP_RIS_ROR
/** Receive TimeOut */
#define SSP_INTSTAT_RAW_RT SSP_RIS_RT
/** Rx FIFO is at least half full */
#define SSP_INTSTAT_RAW_RX SSP_RIS_RX
/** Tx FIFO is at least half empty */
#define SSP_INTSTAT_RAW_TX SSP_RIS_TX
/*********************************************************************//**
* SSP Interrupt Clear defines
**********************************************************************/
/** Writing a 1 to this bit clears the "frame was received when
* RxFIFO was full" interrupt */
#define SSP_INTCLR_ROR SSP_ICR_ROR
/** Writing a 1 to this bit clears the "Rx FIFO was not empty and
* has not been read for a timeout period" interrupt */
#define SSP_INTCLR_RT SSP_ICR_RT
/*********************************************************************//**
* SSP DMA defines
**********************************************************************/
/** SSP bit for enabling RX DMA */
#define SSP_DMA_RX SSP_DMA_RXDMA_EN
/** SSP bit for enabling TX DMA */
#define SSP_DMA_TX SSP_DMA_TXDMA_EN
/* SSP Status Implementation definitions */
#define SSP_STAT_DONE (1UL<<8) /**< Done */
#define SSP_STAT_ERROR (1UL<<9) /**< Error */
/**
* @}
*/
/* Private Macros ------------------------------------------------------------- */
/** @defgroup SSP_Private_Macros SSP Private Macros
* @{
*/
/* --------------------- BIT DEFINITIONS -------------------------------------- */
/*********************************************************************//**
* Macro defines for CR0 register
**********************************************************************/
/** SSP data size select, must be 4 bits to 16 bits */
#define SSP_CR0_DSS(n) ((uint32_t)((n-1)&0xF))
/** SSP control 0 Motorola SPI mode */
#define SSP_CR0_FRF_SPI ((uint32_t)(0<<4))
/** SSP control 0 TI synchronous serial mode */
#define SSP_CR0_FRF_TI ((uint32_t)(1<<4))
/** SSP control 0 National Micro-wire mode */
#define SSP_CR0_FRF_MICROWIRE ((uint32_t)(2<<4))
/** SPI clock polarity bit (used in SPI mode only), (1) = maintains the
bus clock high between frames, (0) = low */
#define SSP_CR0_CPOL_HI ((uint32_t)(1<<6))
/** SPI clock out phase bit (used in SPI mode only), (1) = captures data
on the second clock transition of the frame, (0) = first */
#define SSP_CR0_CPHA_SECOND ((uint32_t)(1<<7))
/** SSP serial clock rate value load macro, divider rate is
PERIPH_CLK / (cpsr * (SCR + 1)) */
#define SSP_CR0_SCR(n) ((uint32_t)((n&0xFF)<<8))
/** SSP CR0 bit mask */
#define SSP_CR0_BITMASK ((uint32_t)(0xFFFF))
/*********************************************************************//**
* Macro defines for CR1 register
**********************************************************************/
/** SSP control 1 loopback mode enable bit */
#define SSP_CR1_LBM_EN ((uint32_t)(1<<0))
/** SSP control 1 enable bit */
#define SSP_CR1_SSP_EN ((uint32_t)(1<<1))
/** SSP control 1 slave enable */
#define SSP_CR1_SLAVE_EN ((uint32_t)(1<<2))
/** SSP control 1 slave out disable bit, disables transmit line in slave
mode */
#define SSP_CR1_SO_DISABLE ((uint32_t)(1<<3))
/** SSP CR1 bit mask */
#define SSP_CR1_BITMASK ((uint32_t)(0x0F))
/*********************************************************************//**
* Macro defines for DR register
**********************************************************************/
/** SSP data bit mask */
#define SSP_DR_BITMASK(n) ((n)&0xFFFF)
/*********************************************************************//**
* Macro defines for SR register
**********************************************************************/
/** SSP status TX FIFO Empty bit */
#define SSP_SR_TFE ((uint32_t)(1<<0))
/** SSP status TX FIFO not full bit */
#define SSP_SR_TNF ((uint32_t)(1<<1))
/** SSP status RX FIFO not empty bit */
#define SSP_SR_RNE ((uint32_t)(1<<2))
/** SSP status RX FIFO full bit */
#define SSP_SR_RFF ((uint32_t)(1<<3))
/** SSP status SSP Busy bit */
#define SSP_SR_BSY ((uint32_t)(1<<4))
/** SSP SR bit mask */
#define SSP_SR_BITMASK ((uint32_t)(0x1F))
/*********************************************************************//**
* Macro defines for CPSR register
**********************************************************************/
/** SSP clock prescaler */
#define SSP_CPSR_CPDVSR(n) ((uint32_t)(n&0xFF))
/** SSP CPSR bit mask */
#define SSP_CPSR_BITMASK ((uint32_t)(0xFF))
/*********************************************************************//**
* Macro define for (IMSC) Interrupt Mask Set/Clear registers
**********************************************************************/
/** Receive Overrun */
#define SSP_IMSC_ROR ((uint32_t)(1<<0))
/** Receive TimeOut */
#define SSP_IMSC_RT ((uint32_t)(1<<1))
/** Rx FIFO is at least half full */
#define SSP_IMSC_RX ((uint32_t)(1<<2))
/** Tx FIFO is at least half empty */
#define SSP_IMSC_TX ((uint32_t)(1<<3))
/** IMSC bit mask */
#define SSP_IMSC_BITMASK ((uint32_t)(0x0F))
/*********************************************************************//**
* Macro define for (RIS) Raw Interrupt Status registers
**********************************************************************/
/** Receive Overrun */
#define SSP_RIS_ROR ((uint32_t)(1<<0))
/** Receive TimeOut */
#define SSP_RIS_RT ((uint32_t)(1<<1))
/** Rx FIFO is at least half full */
#define SSP_RIS_RX ((uint32_t)(1<<2))
/** Tx FIFO is at least half empty */
#define SSP_RIS_TX ((uint32_t)(1<<3))
/** RIS bit mask */
#define SSP_RIS_BITMASK ((uint32_t)(0x0F))
/*********************************************************************//**
* Macro define for (MIS) Masked Interrupt Status registers
**********************************************************************/
/** Receive Overrun */
#define SSP_MIS_ROR ((uint32_t)(1<<0))
/** Receive TimeOut */
#define SSP_MIS_RT ((uint32_t)(1<<1))
/** Rx FIFO is at least half full */
#define SSP_MIS_RX ((uint32_t)(1<<2))
/** Tx FIFO is at least half empty */
#define SSP_MIS_TX ((uint32_t)(1<<3))
/** MIS bit mask */
#define SSP_MIS_BITMASK ((uint32_t)(0x0F))
/*********************************************************************//**
* Macro define for (ICR) Interrupt Clear registers
**********************************************************************/
/** Writing a 1 to this bit clears the "frame was received when
* RxFIFO was full" interrupt */
#define SSP_ICR_ROR ((uint32_t)(1<<0))
/** Writing a 1 to this bit clears the "Rx FIFO was not empty and
* has not been read for a timeout period" interrupt */
#define SSP_ICR_RT ((uint32_t)(1<<1))
/** ICR bit mask */
#define SSP_ICR_BITMASK ((uint32_t)(0x03))
/*********************************************************************//**
* Macro defines for DMACR register
**********************************************************************/
/** SSP bit for enabling RX DMA */
#define SSP_DMA_RXDMA_EN ((uint32_t)(1<<0))
/** SSP bit for enabling TX DMA */
#define SSP_DMA_TXDMA_EN ((uint32_t)(1<<1))
/** DMACR bit mask */
#define SSP_DMA_BITMASK ((uint32_t)(0x03))
/* ---------------- CHECK PARAMETER DEFINITIONS ---------------------------- */
/** Macro to determine if it is valid SSP port number */
#define PARAM_SSPx(n) ((((uint32_t *)n)==((uint32_t *)LPC_SSP0)) \
|| (((uint32_t *)n)==((uint32_t *)LPC_SSP1)))
/** Macro check clock phase control mode */
#define PARAM_SSP_CPHA(n) ((n==SSP_CPHA_FIRST) || (n==SSP_CPHA_SECOND))
/** Macro check clock polarity mode */
#define PARAM_SSP_CPOL(n) ((n==SSP_CPOL_HI) || (n==SSP_CPOL_LO))
/* Macro check master/slave mode */
#define PARAM_SSP_MODE(n) ((n==SSP_SLAVE_MODE) || (n==SSP_MASTER_MODE))
/* Macro check databit value */
#define PARAM_SSP_DATABIT(n) ((n==SSP_DATABIT_4) || (n==SSP_DATABIT_5) \
|| (n==SSP_DATABIT_6) || (n==SSP_DATABIT_16) \
|| (n==SSP_DATABIT_7) || (n==SSP_DATABIT_8) \
|| (n==SSP_DATABIT_9) || (n==SSP_DATABIT_10) \
|| (n==SSP_DATABIT_11) || (n==SSP_DATABIT_12) \
|| (n==SSP_DATABIT_13) || (n==SSP_DATABIT_14) \
|| (n==SSP_DATABIT_15))
/* Macro check frame type */
#define PARAM_SSP_FRAME(n) ((n==SSP_FRAME_SPI) || (n==SSP_FRAME_TI)\
|| (n==SSP_FRAME_MICROWIRE))
/* Macro check SSP status */
#define PARAM_SSP_STAT(n) ((n==SSP_STAT_TXFIFO_EMPTY) || (n==SSP_STAT_TXFIFO_NOTFULL) \
|| (n==SSP_STAT_RXFIFO_NOTEMPTY) || (n==SSP_STAT_RXFIFO_FULL) \
|| (n==SSP_STAT_BUSY))
/* Macro check interrupt configuration */
#define PARAM_SSP_INTCFG(n) ((n==SSP_INTCFG_ROR) || (n==SSP_INTCFG_RT) \
|| (n==SSP_INTCFG_RX) || (n==SSP_INTCFG_TX))
/* Macro check interrupt status value */
#define PARAM_SSP_INTSTAT(n) ((n==SSP_INTSTAT_ROR) || (n==SSP_INTSTAT_RT) \
|| (n==SSP_INTSTAT_RX) || (n==SSP_INTSTAT_TX))
/* Macro check interrupt status raw value */
#define PARAM_SSP_INTSTAT_RAW(n) ((n==SSP_INTSTAT_RAW_ROR) || (n==SSP_INTSTAT_RAW_RT) \
|| (n==SSP_INTSTAT_RAW_RX) || (n==SSP_INTSTAT_RAW_TX))
/* Macro check interrupt clear mode */
#define PARAM_SSP_INTCLR(n) ((n==SSP_INTCLR_ROR) || (n==SSP_INTCLR_RT))
/* Macro check DMA mode */
#define PARAM_SSP_DMA(n) ((n==SSP_DMA_TX) || (n==SSP_DMA_RX))
/**
* @}
*/
/* Public Types --------------------------------------------------------------- */
/** @defgroup SSP_Public_Types SSP Public Types
* @{
*/
/** @brief SSP configuration structure */
typedef struct {
uint32_t Databit; /** Databit number, should be SSP_DATABIT_x,
where x is in range from 4 - 16 */
uint32_t CPHA; /** Clock phase, should be:
- SSP_CPHA_FIRST: first clock edge
- SSP_CPHA_SECOND: second clock edge */
uint32_t CPOL; /** Clock polarity, should be:
- SSP_CPOL_HI: high level
- SSP_CPOL_LO: low level */
uint32_t Mode; /** SSP mode, should be:
- SSP_MASTER_MODE: Master mode
- SSP_SLAVE_MODE: Slave mode */
uint32_t FrameFormat; /** Frame Format:
- SSP_FRAME_SPI: Motorola SPI frame format
- SSP_FRAME_TI: TI frame format
- SSP_FRAME_MICROWIRE: National Microwire frame format */
uint32_t ClockRate; /** Clock rate,in Hz */
} SSP_CFG_Type;
/**
* @brief SSP Transfer Type definitions
*/
typedef enum {
SSP_TRANSFER_POLLING = 0, /**< Polling transfer */
SSP_TRANSFER_INTERRUPT /**< Interrupt transfer */
} SSP_TRANSFER_Type;
/**
* @brief SPI Data configuration structure definitions
*/
typedef struct {
void *tx_data; /**< Pointer to transmit data */
uint32_t tx_cnt; /**< Transmit counter */
void *rx_data; /**< Pointer to transmit data */
uint32_t rx_cnt; /**< Receive counter */
uint32_t length; /**< Length of transfer data */
uint32_t status; /**< Current status of SSP activity */
} SSP_DATA_SETUP_Type;
/**
* @}
*/
/* Public Functions ----------------------------------------------------------- */
/** @defgroup SSP_Public_Functions SSP Public Functions
* @{
*/
/* SSP Init/DeInit functions --------------------------------------------------*/
void SSP_Init(LPC_SSP_TypeDef *SSPx, SSP_CFG_Type *SSP_ConfigStruct);
void SSP_DeInit(LPC_SSP_TypeDef* SSPx);
/* SSP configure functions ----------------------------------------------------*/
void SSP_ConfigStructInit(SSP_CFG_Type *SSP_InitStruct);
/* SSP enable/disable functions -----------------------------------------------*/
void SSP_Cmd(LPC_SSP_TypeDef* SSPx, FunctionalState NewState);
void SSP_LoopBackCmd(LPC_SSP_TypeDef* SSPx, FunctionalState NewState);
void SSP_SlaveOutputCmd(LPC_SSP_TypeDef* SSPx, FunctionalState NewState);
void SSP_DMACmd(LPC_SSP_TypeDef *SSPx, uint32_t DMAMode, FunctionalState NewState);
/* SSP get information functions ----------------------------------------------*/
FlagStatus SSP_GetStatus(LPC_SSP_TypeDef* SSPx, uint32_t FlagType);
uint8_t SSP_GetDataSize(LPC_SSP_TypeDef* SSPx);
IntStatus SSP_GetRawIntStatus(LPC_SSP_TypeDef *SSPx, uint32_t RawIntType);
uint32_t SSP_GetRawIntStatusReg(LPC_SSP_TypeDef *SSPx);
IntStatus SSP_GetIntStatus (LPC_SSP_TypeDef *SSPx, uint32_t IntType);
/* SSP transfer data functions ------------------------------------------------*/
void SSP_SendData(LPC_SSP_TypeDef* SSPx, uint16_t Data);
uint16_t SSP_ReceiveData(LPC_SSP_TypeDef* SSPx);
int32_t SSP_ReadWrite (LPC_SSP_TypeDef *SSPx, SSP_DATA_SETUP_Type *dataCfg, \
SSP_TRANSFER_Type xfType);
/* SSP IRQ function ------------------------------------------------------------*/
void SSP_IntConfig(LPC_SSP_TypeDef *SSPx, uint32_t IntType, FunctionalState NewState);
void SSP_ClearIntPending(LPC_SSP_TypeDef *SSPx, uint32_t IntType);
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* LPC17XX_SSP_H_ */
/**
* @}
*/
/* --------------------------------- End Of File ------------------------------ */