194 lines
7.0 KiB
C
194 lines
7.0 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* MRR ESPE pin assignments
|
|
* MRR ESPE is a 3D printer control board based on the ESP32 microcontroller.
|
|
* Supports 5 stepper drivers (using I2S stepper stream), heated bed,
|
|
* single hotend, and LCD controller.
|
|
*/
|
|
|
|
#include "env_validate.h"
|
|
|
|
#if EXTRUDERS > 2 || E_STEPPERS > 2
|
|
#error "MKS TinyBee supports up to 2 E steppers."
|
|
#elif HOTENDS > 2
|
|
#error "MKS TinyBee supports up to 2 hotends / E steppers."
|
|
#endif
|
|
|
|
#define BOARD_INFO_NAME "MKS TinyBee"
|
|
#define BOARD_WEBSITE_URL "https://github.com/makerbase-mks"
|
|
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME
|
|
|
|
// MAX_EXPANDER_BITS is defined for MKS TinyBee in HAL/ESP32/inc/Conditionals_adv.h
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN 2
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_STOP_PIN 33
|
|
#define Y_STOP_PIN 32
|
|
#define Z_STOP_PIN 22
|
|
//#define FIL_RUNOUT_PIN 35
|
|
|
|
//
|
|
// Enable I2S stepper stream
|
|
//
|
|
#define I2S_STEPPER_STREAM
|
|
#if ENABLED(I2S_STEPPER_STREAM)
|
|
#define I2S_WS 26
|
|
#define I2S_BCK 25
|
|
#define I2S_DATA 27
|
|
#endif
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_STEP_PIN 129
|
|
#define X_DIR_PIN 130
|
|
#define X_ENABLE_PIN 128
|
|
|
|
#define Y_STEP_PIN 132
|
|
#define Y_DIR_PIN 133
|
|
#define Y_ENABLE_PIN 131
|
|
|
|
#define Z_STEP_PIN 135
|
|
#define Z_DIR_PIN 136
|
|
#define Z_ENABLE_PIN 134
|
|
|
|
#define E0_STEP_PIN 138
|
|
#define E0_DIR_PIN 139
|
|
#define E0_ENABLE_PIN 137
|
|
|
|
#define E1_STEP_PIN 141
|
|
#define E1_DIR_PIN 142
|
|
#define E1_ENABLE_PIN 140
|
|
|
|
#define Z2_STEP_PIN 141
|
|
#define Z2_DIR_PIN 142
|
|
#define Z2_ENABLE_PIN 140
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN 36 // Analog Input
|
|
#define TEMP_1_PIN 34 // Analog Input, you need set R6=0Ω and R7=NC
|
|
#define TEMP_BED_PIN 39 // Analog Input
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN 145
|
|
#define HEATER_1_PIN 146
|
|
#define FAN_PIN 147
|
|
#define FAN1_PIN 148
|
|
#define HEATER_BED_PIN 144
|
|
|
|
//#define CONTROLLER_FAN_PIN 148
|
|
//#define E0_AUTO_FAN_PIN 148 // need to update Configuration_adv.h @section extruder
|
|
//#define E1_AUTO_FAN_PIN 149 // need to update Configuration_adv.h @section extruder
|
|
|
|
//
|
|
// ADC Reference Voltage
|
|
//
|
|
#define ADC_REFERENCE_VOLTAGE 2.5 // 2.5V reference VDDA
|
|
|
|
/**
|
|
* ------ ------
|
|
* (BEEPER) 149 |10 9 | 13 (BTN_ENC) (SPI MISO) 19 |10 9 | 18 (SPI SCK)
|
|
* (LCD_EN) 21 | 8 7 | 4 (LCD_RS) (BTN_EN1) 14 | 8 7 | 5 (SPI CS)
|
|
* (LCD_D4) 0 6 5 | 16 (LCD_D5) (BTN_EN2) 12 6 5 | 23 (SPI MOSI)
|
|
* (LCD_D6) 15 | 4 3 | 17 (LCD_D7) (SPI_DET) 34 | 4 3 | RESET
|
|
* GND | 2 1 | 5V GND | 2 1 | 3.3V
|
|
* ------ ------
|
|
* EXP1 EXP2
|
|
*/
|
|
|
|
#define EXP1_03_PIN 17
|
|
#define EXP1_04_PIN 15
|
|
#define EXP1_05_PIN 16
|
|
#define EXP1_06_PIN 0
|
|
#define EXP1_07_PIN 4
|
|
#define EXP1_08_PIN 21
|
|
#define EXP1_09_PIN 13
|
|
#define EXP1_10_PIN 149
|
|
|
|
#define EXP2_03_PIN -1 // RESET
|
|
#define EXP2_04_PIN 34
|
|
#define EXP2_05_PIN 23
|
|
#define EXP2_06_PIN 12
|
|
#define EXP2_07_PIN 5
|
|
#define EXP2_08_PIN 14
|
|
#define EXP2_09_PIN 18
|
|
#define EXP2_10_PIN 19
|
|
|
|
//
|
|
// MicroSD card
|
|
//
|
|
//#define SD_MOSI_PIN EXP2_05_PIN // uses esp32 default 23
|
|
//#define SD_MISO_PIN EXP2_10_PIN // uses esp32 default 19
|
|
//#define SD_SCK_PIN EXP2_09_PIN // uses esp32 default 18
|
|
#define SDSS EXP2_07_PIN
|
|
#define SD_DETECT_PIN EXP2_04_PIN // IO34 default is SD_DET signal (Jump to SDDET)
|
|
#define USES_SHARED_SPI // SPI is shared by SD card with TMC SPI drivers
|
|
|
|
#if HAS_WIRED_LCD
|
|
#define BEEPER_PIN EXP1_10_PIN
|
|
#define LCD_PINS_ENABLE EXP1_08_PIN
|
|
#define LCD_PINS_RS EXP1_07_PIN
|
|
#define BTN_ENC EXP1_09_PIN
|
|
#define BTN_EN1 EXP2_08_PIN
|
|
#define BTN_EN2 EXP2_06_PIN
|
|
#define LCD_BACKLIGHT_PIN -1
|
|
|
|
#if ENABLED(MKS_MINI_12864)
|
|
// MKS MINI12864 and MKS LCD12864B; If using MKS LCD12864A (Need to remove RPK2 resistor)
|
|
#define DOGLCD_CS EXP1_05_PIN
|
|
#define DOGLCD_A0 EXP1_04_PIN
|
|
#define LCD_RESET_PIN -1
|
|
#elif ENABLED(FYSETC_MINI_12864_2_1)
|
|
// MKS_MINI_12864_V3, BTT_MINI_12864_V1, FYSETC_MINI_12864_2_1
|
|
#define DOGLCD_CS EXP1_08_PIN
|
|
#define DOGLCD_A0 EXP1_07_PIN
|
|
#define LCD_RESET_PIN EXP1_06_PIN
|
|
#define NEOPIXEL_PIN EXP1_05_PIN
|
|
#if SD_CONNECTION_IS(ONBOARD)
|
|
#define FORCE_SOFT_SPI
|
|
#endif
|
|
#else
|
|
#define LCD_PINS_D4 EXP1_06_PIN
|
|
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
|
#define LCD_PINS_D5 EXP1_05_PIN
|
|
#define LCD_PINS_D6 EXP1_04_PIN
|
|
#define LCD_PINS_D7 EXP1_03_PIN
|
|
#endif
|
|
#define BOARD_ST7920_DELAY_1 96
|
|
#define BOARD_ST7920_DELAY_2 48
|
|
#define BOARD_ST7920_DELAY_3 600
|
|
#endif
|
|
#endif // HAS_WIRED_LCD
|