549 lines
33 KiB
C
549 lines
33 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* French
|
|
*
|
|
* LCD Menu Messages
|
|
* See also http://marlinfw.org/docs/development/lcd_language.html
|
|
*
|
|
*/
|
|
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
#define CHARSIZE 2
|
|
|
|
#define WELCOME_MSG MACHINE_NAME _UxGT(" prête.")
|
|
#define MSG_YES _UxGT("Oui")
|
|
#define MSG_NO _UxGT("Non")
|
|
#define MSG_BACK _UxGT("Retour")
|
|
#define MSG_MEDIA_INSERTED _UxGT("Carte insérée")
|
|
#define MSG_MEDIA_REMOVED _UxGT("Carte retirée")
|
|
#define MSG_MEDIA_RELEASED _UxGT("Carte libérée")
|
|
#define MSG_LCD_ENDSTOPS _UxGT("Butées")
|
|
#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Butées SW")
|
|
#define MSG_MAIN _UxGT("Menu principal")
|
|
#define MSG_ADVANCED_SETTINGS _UxGT("Config. avancée")
|
|
#define MSG_CONFIGURATION _UxGT("Configuration")
|
|
#define MSG_AUTOSTART _UxGT("Exéc. auto#.gcode")
|
|
#define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs")
|
|
#define MSG_DEBUG_MENU _UxGT("Menu debug")
|
|
#define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.")
|
|
#define MSG_AUTO_HOME _UxGT("Origine auto")
|
|
#define MSG_AUTO_HOME_X _UxGT("Origine X auto")
|
|
#define MSG_AUTO_HOME_Y _UxGT("Origine Y auto")
|
|
#define MSG_AUTO_HOME_Z _UxGT("Origine Z auto")
|
|
#define MSG_AUTO_Z_ALIGN _UxGT("Align. Z auto")
|
|
#define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ...")
|
|
#define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer")
|
|
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant")
|
|
#define MSG_LEVEL_BED_DONE _UxGT("Mise à niveau OK!")
|
|
#define MSG_Z_FADE_HEIGHT _UxGT("Hauteur lissée")
|
|
#define MSG_SET_HOME_OFFSETS _UxGT("Régl. décal origine")
|
|
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Décalages appliqués")
|
|
#define MSG_SET_ORIGIN _UxGT("Régler origine")
|
|
#define MSG_PREHEAT_1 _UxGT("Préchauffage " PREHEAT_1_LABEL)
|
|
#define MSG_PREHEAT_1_N _UxGT("Préchauff. " PREHEAT_1_LABEL " ")
|
|
#define MSG_PREHEAT_1_ALL _UxGT("Préch. " PREHEAT_1_LABEL " Tout")
|
|
#define MSG_PREHEAT_1_END _UxGT("Préch. " PREHEAT_1_LABEL " buse")
|
|
#define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. " PREHEAT_1_LABEL " lit")
|
|
#define MSG_PREHEAT_1_SETTINGS _UxGT("Régler préch. " PREHEAT_1_LABEL)
|
|
#define MSG_PREHEAT_2 _UxGT("Préchauffage " PREHEAT_2_LABEL)
|
|
#define MSG_PREHEAT_2_N _UxGT("Préchauff. " PREHEAT_2_LABEL " ")
|
|
#define MSG_PREHEAT_2_ALL _UxGT("Préch. " PREHEAT_2_LABEL " Tout")
|
|
#define MSG_PREHEAT_2_END _UxGT("Préch. " PREHEAT_2_LABEL " buse")
|
|
#define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. " PREHEAT_2_LABEL " lit")
|
|
#define MSG_PREHEAT_2_SETTINGS _UxGT("Régler préch. " PREHEAT_2_LABEL)
|
|
#define MSG_PREHEAT_CUSTOM _UxGT("Préchauffage perso")
|
|
#define MSG_COOLDOWN _UxGT("Refroidir")
|
|
#define MSG_LASER_MENU _UxGT("Contrôle Laser")
|
|
#define MSG_LASER_OFF _UxGT("Laser Off")
|
|
#define MSG_LASER_ON _UxGT("Laser On")
|
|
#define MSG_LASER_POWER _UxGT("Puissance")
|
|
#define MSG_SPINDLE_REVERSE _UxGT("Inverser broches")
|
|
#define MSG_SWITCH_PS_ON _UxGT("Allumer alim.")
|
|
#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.")
|
|
#define MSG_EXTRUDE _UxGT("Extrusion")
|
|
#define MSG_RETRACT _UxGT("Retrait")
|
|
#define MSG_MOVE_AXIS _UxGT("Déplacer un axe")
|
|
#define MSG_BED_LEVELING _UxGT("Régler Niv. lit")
|
|
#define MSG_LEVEL_BED _UxGT("Niveau du lit")
|
|
#define MSG_LEVEL_CORNERS _UxGT("Niveau coins")
|
|
#define MSG_NEXT_CORNER _UxGT("Coin suivant")
|
|
#define MSG_EDIT_MESH _UxGT("Modifier maille")
|
|
#define MSG_EDITING_STOPPED _UxGT("Arrêt édit. maillage")
|
|
#define MSG_PROBING_MESH _UxGT("Mesure point")
|
|
#define MSG_MESH_X _UxGT("Index X")
|
|
#define MSG_MESH_Y _UxGT("Index Y")
|
|
#define MSG_MESH_EDIT_Z _UxGT("Valeur Z")
|
|
#define MSG_USER_MENU _UxGT("Commandes perso")
|
|
|
|
#define MSG_LCD_TILTING_MESH _UxGT("Touche point")
|
|
#define MSG_M48_TEST _UxGT("Ecart sonde Z M48")
|
|
#define MSG_M48_DEVIATION _UxGT("Ecart")
|
|
#define MSG_IDEX_MENU _UxGT("Mode IDEX")
|
|
#define MSG_IDEX_MODE_AUTOPARK _UxGT("Auto-Park")
|
|
#define MSG_IDEX_MODE_DUPLICATE _UxGT("Duplication")
|
|
#define MSG_IDEX_MODE_MIRRORED_COPY _UxGT("Copie miroir")
|
|
#define MSG_IDEX_MODE_FULL_CTRL _UxGT("Contrôle complet")
|
|
#define MSG_OFFSETS_MENU _UxGT("Offsets Outil")
|
|
#define MSG_X_OFFSET _UxGT("Buse 2 X")
|
|
#define MSG_Y_OFFSET _UxGT("Buse 2 Y")
|
|
#define MSG_Z_OFFSET _UxGT("Buse 2 Z")
|
|
#define MSG_UBL_DOING_G29 _UxGT("G29 en cours")
|
|
#define MSG_UBL_UNHOMED _UxGT("Origine XYZ requise")
|
|
#define MSG_UBL_TOOLS _UxGT("Outils UBL")
|
|
#define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié")
|
|
#define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel")
|
|
#define MSG_UBL_BC_INSERT _UxGT("Poser câle & mesurer")
|
|
#define MSG_UBL_BC_INSERT2 _UxGT("Mesure")
|
|
#define MSG_UBL_BC_REMOVE _UxGT("ôter et mesurer lit")
|
|
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant")
|
|
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL")
|
|
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL")
|
|
#define MSG_UBL_SET_TEMP_BED _UxGT("Température lit")
|
|
#define MSG_UBL_BED_TEMP_CUSTOM MSG_UBL_SET_TEMP_BED
|
|
#define MSG_UBL_SET_TEMP_HOTEND _UxGT("Température buse")
|
|
#define MSG_UBL_HOTEND_TEMP_CUSTOM MSG_UBL_SET_TEMP_HOTEND
|
|
#define MSG_UBL_MESH_EDIT _UxGT("Editer maille")
|
|
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso")
|
|
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille")
|
|
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille")
|
|
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso")
|
|
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Créer maille")
|
|
#define MSG_UBL_BUILD_MESH_M1 _UxGT("Créer maille " PREHEAT_1_LABEL)
|
|
#define MSG_UBL_BUILD_MESH_M2 _UxGT("Créer maille " PREHEAT_2_LABEL)
|
|
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Créer maille froide")
|
|
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Ajuster haut. maille")
|
|
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Hauteur")
|
|
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Valider maille")
|
|
#define MSG_UBL_VALIDATE_MESH_M1 _UxGT("Valider maille " PREHEAT_1_LABEL)
|
|
#define MSG_UBL_VALIDATE_MESH_M2 _UxGT("Valider maille " PREHEAT_2_LABEL)
|
|
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso")
|
|
#define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille")
|
|
#define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille")
|
|
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau à 3 points")
|
|
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau grille")
|
|
#define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau")
|
|
#define MSG_UBL_SIDE_POINTS _UxGT("Point latéral")
|
|
#define MSG_UBL_MAP_TYPE _UxGT("Type de carte")
|
|
#define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille")
|
|
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hôte")
|
|
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Voir pour CSV")
|
|
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Voir pour sauveg.")
|
|
#define MSG_UBL_INFO_UBL _UxGT("Voir info UBL")
|
|
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Taux de remplissage")
|
|
#define MSG_UBL_MANUAL_FILLIN _UxGT("Remplissage manuel")
|
|
#define MSG_UBL_SMART_FILLIN _UxGT("Remplissage auto")
|
|
#define MSG_UBL_FILLIN_MESH _UxGT("Maille remplissage")
|
|
#define MSG_UBL_INVALIDATE_ALL _UxGT("Tout annuler")
|
|
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Annuler le plus près")
|
|
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Réglage fin (tous)")
|
|
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Réglage fin (proche)")
|
|
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Stockage maille")
|
|
#define MSG_UBL_STORAGE_SLOT _UxGT("Slot mémoire")
|
|
#define MSG_UBL_LOAD_MESH _UxGT("Charger maille")
|
|
#define MSG_UBL_SAVE_MESH _UxGT("Sauver maille")
|
|
#define MSG_MESH_LOADED _UxGT("Maille %i chargée")
|
|
#define MSG_MESH_SAVED _UxGT("Maille %i enreg.")
|
|
#define MSG_UBL_NO_STORAGE _UxGT("Pas de mémoire")
|
|
#define MSG_UBL_SAVE_ERROR _UxGT("Err: Enreg. UBL")
|
|
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Ouvrir UBL")
|
|
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Décal. Z arrêté")
|
|
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Pas à pas")
|
|
|
|
#define MSG_LED_CONTROL _UxGT("Contrôle LED")
|
|
#define MSG_LEDS _UxGT("Lumière")
|
|
#define MSG_LED_PRESETS _UxGT("Préregl. LED")
|
|
#define MSG_SET_LEDS_RED _UxGT("Rouge")
|
|
#define MSG_SET_LEDS_ORANGE _UxGT("Orange")
|
|
#define MSG_SET_LEDS_YELLOW _UxGT("Jaune")
|
|
#define MSG_SET_LEDS_GREEN _UxGT("Vert")
|
|
#define MSG_SET_LEDS_BLUE _UxGT("Bleu")
|
|
#define MSG_SET_LEDS_INDIGO _UxGT("Indigo")
|
|
#define MSG_SET_LEDS_VIOLET _UxGT("Violet")
|
|
#define MSG_SET_LEDS_WHITE _UxGT("Blanc")
|
|
#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut")
|
|
#define MSG_CUSTOM_LEDS _UxGT("LEDs perso.")
|
|
#define MSG_INTENSITY_R _UxGT("Intensité rouge")
|
|
#define MSG_INTENSITY_G _UxGT("Intensité vert")
|
|
#define MSG_INTENSITY_B _UxGT("Intensité bleu")
|
|
#define MSG_INTENSITY_W _UxGT("Intensité blanc")
|
|
#define MSG_LED_BRIGHTNESS _UxGT("Luminosité")
|
|
|
|
#define MSG_MOVING _UxGT("Déplacement...")
|
|
#define MSG_FREE_XY _UxGT("Débloquer XY")
|
|
#define MSG_MOVE_X _UxGT("Déplacer X")
|
|
#define MSG_MOVE_Y _UxGT("Déplacer Y")
|
|
#define MSG_MOVE_Z _UxGT("Déplacer Z")
|
|
#define MSG_MOVE_E _UxGT("Extrudeur")
|
|
#define MSG_HOTEND_TOO_COLD _UxGT("Buse trop froide")
|
|
#define MSG_MOVE_Z_DIST _UxGT("Déplacer %smm")
|
|
#define MSG_MOVE_01MM _UxGT("Déplacer 0.1mm")
|
|
#define MSG_MOVE_1MM _UxGT("Déplacer 1mm")
|
|
#define MSG_MOVE_10MM _UxGT("Déplacer 10mm")
|
|
#define MSG_SPEED _UxGT("Vitesse")
|
|
#define MSG_BED_Z _UxGT("Lit Z")
|
|
#define MSG_NOZZLE _UxGT("Buse")
|
|
#define MSG_BED _UxGT("Lit")
|
|
#define MSG_CHAMBER _UxGT("Caisson")
|
|
#define MSG_FAN_SPEED _UxGT("Vitesse ventil.")
|
|
#define MSG_EXTRA_FAN_SPEED _UxGT("Extra V ventil.")
|
|
|
|
#define MSG_FLOW _UxGT("Flux")
|
|
#define MSG_CONTROL _UxGT("Contrôler")
|
|
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Min")
|
|
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Max")
|
|
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Facteur")
|
|
#define MSG_AUTOTEMP _UxGT("Temp. Auto.")
|
|
#define MSG_LCD_ON _UxGT("Marche")
|
|
#define MSG_LCD_OFF _UxGT("Arrêt")
|
|
#define MSG_PID_P _UxGT("PID-P")
|
|
#define MSG_PID_I _UxGT("PID-I")
|
|
#define MSG_PID_D _UxGT("PID-D")
|
|
#define MSG_PID_C _UxGT("PID-C")
|
|
#define MSG_SELECT _UxGT("Sélectionner")
|
|
#define MSG_ACC _UxGT("Accélération")
|
|
#define MSG_JERK _UxGT("Jerk")
|
|
#if IS_KINEMATIC
|
|
#define MSG_VA_JERK _UxGT("Va jerk")
|
|
#define MSG_VB_JERK _UxGT("Vb jerk")
|
|
#define MSG_VC_JERK _UxGT("Vc jerk")
|
|
#else
|
|
#define MSG_VA_JERK _UxGT("Vx jerk")
|
|
#define MSG_VB_JERK _UxGT("Vy jerk")
|
|
#define MSG_VC_JERK _UxGT("Vz jerk")
|
|
#endif
|
|
#define MSG_VE_JERK _UxGT("Ve jerk")
|
|
#define MSG_VELOCITY _UxGT("Vélocité")
|
|
#define MSG_JUNCTION_DEVIATION _UxGT("Déviat. jonct.")
|
|
#define MSG_VMAX _UxGT("Vmax ")
|
|
#define MSG_VMIN _UxGT("Vmin ")
|
|
#define MSG_VTRAV_MIN _UxGT("V dépl. min")
|
|
#define MSG_ACCELERATION _UxGT("Accélération")
|
|
#define MSG_AMAX _UxGT("Amax ")
|
|
#define MSG_A_RETRACT _UxGT("A retrait")
|
|
#define MSG_A_TRAVEL _UxGT("A dépl.")
|
|
#define MSG_STEPS_PER_MM _UxGT("Pas/mm")
|
|
#if IS_KINEMATIC
|
|
#define MSG_ASTEPS _UxGT("A pas/mm")
|
|
#define MSG_BSTEPS _UxGT("B pas/mm")
|
|
#define MSG_CSTEPS _UxGT("C pas/mm")
|
|
#else
|
|
#define MSG_ASTEPS _UxGT("X pas/mm")
|
|
#define MSG_BSTEPS _UxGT("Y pas/mm")
|
|
#define MSG_CSTEPS _UxGT("Z pas/mm")
|
|
#endif
|
|
#define MSG_ESTEPS _UxGT("E pas/mm")
|
|
#define MSG_E1STEPS _UxGT("E1 pas/mm")
|
|
#define MSG_E2STEPS _UxGT("E2 pas/mm")
|
|
#define MSG_E3STEPS _UxGT("E3 pas/mm")
|
|
#define MSG_E4STEPS _UxGT("E4 pas/mm")
|
|
#define MSG_E5STEPS _UxGT("E5 pas/mm")
|
|
#define MSG_E6STEPS _UxGT("E6 pas/mm")
|
|
#define MSG_TEMPERATURE _UxGT("Température")
|
|
#define MSG_MOTION _UxGT("Mouvement")
|
|
#define MSG_FILAMENT _UxGT("Filament")
|
|
#define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3")
|
|
#define MSG_FILAMENT_DIAM _UxGT("Diamètre fil.")
|
|
#define MSG_FILAMENT_UNLOAD _UxGT("Retrait mm")
|
|
#define MSG_FILAMENT_LOAD _UxGT("Charger mm")
|
|
#define MSG_ADVANCE_K _UxGT("Avance K")
|
|
#define MSG_CONTRAST _UxGT("Contraste LCD")
|
|
#define MSG_STORE_EEPROM _UxGT("Enregistrer config.")
|
|
#define MSG_LOAD_EEPROM _UxGT("Charger config.")
|
|
#define MSG_RESTORE_FAILSAFE _UxGT("Restaurer défauts")
|
|
#define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM")
|
|
#define MSG_MEDIA_UPDATE _UxGT("MaJ Firmware SD")
|
|
#define MSG_RESET_PRINTER _UxGT("RaZ imprimante")
|
|
#define MSG_REFRESH _UxGT("Actualiser")
|
|
#define MSG_WATCH _UxGT("Surveiller")
|
|
#define MSG_PREPARE _UxGT("Préparer")
|
|
#define MSG_TUNE _UxGT("Régler")
|
|
#define MSG_START_PRINT _UxGT("Démarrer impression")
|
|
#define MSG_BUTTON_NEXT _UxGT("Suivant")
|
|
#define MSG_BUTTON_INIT _UxGT("Init.")
|
|
#define MSG_BUTTON_STOP _UxGT("Stop")
|
|
#define MSG_BUTTON_PRINT _UxGT("Imprimer")
|
|
#define MSG_BUTTON_RESET _UxGT("Reset")
|
|
#define MSG_BUTTON_CANCEL _UxGT("Annuler")
|
|
#define MSG_BUTTON_DONE _UxGT("Terminé")
|
|
#define MSG_PAUSE_PRINT _UxGT("Pause impression")
|
|
#define MSG_RESUME_PRINT _UxGT("Reprendre impr.")
|
|
#define MSG_STOP_PRINT _UxGT("Arrêter impr.")
|
|
#define MSG_OUTAGE_RECOVERY _UxGT("Récupér. coupure")
|
|
#define MSG_MEDIA_MENU _UxGT("Impression SD")
|
|
#define MSG_NO_MEDIA _UxGT("Pas de carte")
|
|
#define MSG_DWELL _UxGT("Repos...")
|
|
#define MSG_USERWAIT _UxGT("Attente utilis.")
|
|
#define MSG_PRINT_PAUSED _UxGT("Impr. en pause")
|
|
#define MSG_PRINTING _UxGT("Impression")
|
|
#define MSG_PRINT_ABORTED _UxGT("Impr. annulée")
|
|
#define MSG_NO_MOVE _UxGT("Moteurs bloqués")
|
|
#define MSG_KILLED _UxGT("KILLED")
|
|
#define MSG_STOPPED _UxGT("STOPPÉ")
|
|
#define MSG_CONTROL_RETRACT _UxGT("Retrait mm")
|
|
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Ech. Retr. mm")
|
|
#define MSG_CONTROL_RETRACTF _UxGT("Retrait V")
|
|
#define MSG_CONTROL_RETRACT_ZHOP _UxGT("Saut Z mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Rappel mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Ech. Rappel mm")
|
|
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Rappel V")
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAPF _UxGT("Ech. Rappel V")
|
|
#define MSG_AUTORETRACT _UxGT("Retrait auto")
|
|
#define MSG_TOOL_CHANGE _UxGT("Changement outil")
|
|
#define MSG_TOOL_CHANGE_ZLIFT _UxGT("Augmenter Z")
|
|
#define MSG_SINGLENOZZLE_PRIME_SPD _UxGT("Vitesse primaire")
|
|
#define MSG_SINGLENOZZLE_RETRACT_SPD _UxGT("Vitesse retrait")
|
|
#define MSG_NOZZLE_STANDBY _UxGT("Attente buse")
|
|
#define MSG_FILAMENT_SWAP_LENGTH _UxGT("Distance retrait")
|
|
#define MSG_FILAMENT_PURGE_LENGTH _UxGT("Longueur de purge")
|
|
#define MSG_FILAMENTCHANGE _UxGT("Changer filament")
|
|
#define MSG_FILAMENTLOAD _UxGT("Charger filament")
|
|
#define MSG_FILAMENTUNLOAD _UxGT("Retrait filament")
|
|
#define MSG_FILAMENTUNLOAD_ALL _UxGT("Décharger tout")
|
|
#define MSG_INIT_MEDIA _UxGT("Init. la carte SD")
|
|
#define MSG_CHANGE_MEDIA _UxGT("Actualiser carte SD")
|
|
#define MSG_RELEASE_MEDIA _UxGT("Retirer carte SD")
|
|
#define MSG_ZPROBE_OUT _UxGT("Sonde Z hors lit")
|
|
#define MSG_SKEW_FACTOR _UxGT("Facteur écart")
|
|
#define MSG_BLTOUCH _UxGT("BLTouch")
|
|
#define MSG_BLTOUCH_SELFTEST _UxGT("Cmd: Self-Test")
|
|
#define MSG_BLTOUCH_RESET _UxGT("Cmd: Reset")
|
|
#define MSG_BLTOUCH_STOW _UxGT("Cmd: Ranger")
|
|
#define MSG_BLTOUCH_DEPLOY _UxGT("Cmd: Déployer")
|
|
#define MSG_BLTOUCH_SW_MODE _UxGT("Cmd: Mode SW")
|
|
#define MSG_BLTOUCH_5V_MODE _UxGT("Cmd: Mode 5V")
|
|
#define MSG_BLTOUCH_OD_MODE _UxGT("Cmd: Mode OD")
|
|
#define MSG_BLTOUCH_MODE_STORE _UxGT("Appliquer Mode")
|
|
#define MSG_BLTOUCH_MODE_STORE_5V _UxGT("Mise en 5V")
|
|
#define MSG_BLTOUCH_MODE_STORE_OD _UxGT("Mise en OD")
|
|
#define MSG_BLTOUCH_MODE_ECHO _UxGT("Afficher Mode")
|
|
#define MSG_TOUCHMI_PROBE _UxGT("TouchMI")
|
|
#define MSG_TOUCHMI_INIT _UxGT("Init. TouchMI")
|
|
#define MSG_TOUCHMI_ZTEST _UxGT("Test décalage Z")
|
|
#define MSG_TOUCHMI_SAVE _UxGT("Sauvegarde")
|
|
#define MSG_MANUAL_DEPLOY_TOUCHMI _UxGT("Déployer TouchMI")
|
|
#define MSG_MANUAL_DEPLOY _UxGT("Déployer Sonde Z")
|
|
#define MSG_MANUAL_STOW _UxGT("Ranger Sonde Z")
|
|
#define MSG_HOME _UxGT("Origine") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#define MSG_FIRST _UxGT("Premier")
|
|
#define MSG_ZPROBE_ZOFFSET _UxGT("Décalage Z")
|
|
#define MSG_BABYSTEP_X _UxGT("Babystep X")
|
|
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
|
|
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
|
|
#define MSG_BABYSTEP_TOTAL _UxGT("Total")
|
|
#define MSG_ENDSTOP_ABORT _UxGT("Butée abandon")
|
|
#define MSG_HEATING_FAILED_LCD _UxGT("Err de chauffe")
|
|
#define MSG_HEATING_FAILED_LCD_BED _UxGT("Err de chauffe lit")
|
|
#define MSG_HEATING_FAILED_LCD_CHAMBER _UxGT("Err chauffe caisson")
|
|
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err TEMP. REDONDANTE")
|
|
#define MSG_THERMAL_RUNAWAY _UxGT("Err THERMIQUE")
|
|
#define MSG_THERMAL_RUNAWAY_BED _UxGT("Err THERMIQUE LIT")
|
|
#define MSG_THERMAL_RUNAWAY_CHAMBER _UxGT("Err THERMIQUE CAISSON")
|
|
#define MSG_ERR_MAXTEMP _UxGT("Err TEMP. MAX")
|
|
#define MSG_ERR_MINTEMP _UxGT("Err TEMP. MIN")
|
|
#define MSG_ERR_MAXTEMP_BED _UxGT("Err TEMP. MAX LIT")
|
|
#define MSG_ERR_MINTEMP_BED _UxGT("Err TEMP. MIN LIT")
|
|
#define MSG_ERR_MAXTEMP_CHAMBER _UxGT("Err MAXTEMP CAISSON")
|
|
#define MSG_ERR_MINTEMP_CHAMBER _UxGT("Err MINTEMP CAISSON")
|
|
#define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST
|
|
|
|
#define MSG_HALTED _UxGT("IMPR. STOPPÉE")
|
|
#define MSG_PLEASE_RESET _UxGT("Redémarrer SVP")
|
|
#define MSG_SHORT_DAY _UxGT("j") // One character only
|
|
#define MSG_SHORT_HOUR _UxGT("h") // One character only
|
|
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
|
|
|
|
#define MSG_HEATING _UxGT("En chauffe...")
|
|
#define MSG_COOLING _UxGT("Refroidissement")
|
|
#define MSG_BED_HEATING _UxGT("Lit en chauffe...")
|
|
#define MSG_BED_COOLING _UxGT("Refroid. du lit...")
|
|
#define MSG_CHAMBER_HEATING _UxGT("Chauffe caisson...")
|
|
#define MSG_CHAMBER_COOLING _UxGT("Refroid. caisson...")
|
|
#define MSG_DELTA_CALIBRATE _UxGT("Calibration Delta")
|
|
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrer X")
|
|
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrer Y")
|
|
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrer Z")
|
|
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrer centre")
|
|
#define MSG_DELTA_SETTINGS _UxGT("Réglages Delta")
|
|
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Calibration Auto")
|
|
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Hauteur Delta")
|
|
#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Delta Z sonde")
|
|
#define MSG_DELTA_DIAG_ROD _UxGT("Diagonale")
|
|
#define MSG_DELTA_HEIGHT _UxGT("Hauteur")
|
|
#define MSG_DELTA_RADIUS _UxGT("Rayon")
|
|
|
|
#define MSG_INFO_MENU _UxGT("Infos imprimante")
|
|
#define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante")
|
|
#define MSG_3POINT_LEVELING _UxGT("Niveau à 3 points")
|
|
#define MSG_LINEAR_LEVELING _UxGT("Niveau linéaire")
|
|
#define MSG_BILINEAR_LEVELING _UxGT("Niveau bilinéaire")
|
|
#define MSG_UBL_LEVELING _UxGT("Niveau lit unifié")
|
|
#define MSG_MESH_LEVELING _UxGT("Niveau maillage")
|
|
#define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante")
|
|
#define MSG_INFO_BOARD_MENU _UxGT("Infos carte")
|
|
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistances")
|
|
#define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs")
|
|
#define MSG_INFO_BAUDRATE _UxGT("Bauds")
|
|
#define MSG_INFO_PROTOCOL _UxGT("Protocole")
|
|
#define MSG_CASE_LIGHT _UxGT("Lumière caisson")
|
|
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Luminosité")
|
|
|
|
#define MSG_EXPECTED_PRINTER _UxGT("Imprimante incorrecte")
|
|
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Nbre impressions")
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées")
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Tps impr. total")
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("Impr. la + longue")
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Total filament")
|
|
#else
|
|
#define MSG_INFO_PRINT_COUNT _UxGT("Impressions")
|
|
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Terminées")
|
|
#define MSG_INFO_PRINT_TIME _UxGT("Total")
|
|
#define MSG_INFO_PRINT_LONGEST _UxGT("+ long")
|
|
#define MSG_INFO_PRINT_FILAMENT _UxGT("Filament")
|
|
#endif
|
|
|
|
#define MSG_INFO_MIN_TEMP _UxGT("Temp Min")
|
|
#define MSG_INFO_MAX_TEMP _UxGT("Temp Max")
|
|
#define MSG_INFO_PSU _UxGT("Alimentation")
|
|
#define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ")
|
|
#define MSG_DAC_PERCENT _UxGT("Driver %")
|
|
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.")
|
|
|
|
#define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE")
|
|
#define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL")
|
|
#define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore")
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.")
|
|
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ")
|
|
#define MSG_RUNOUT_SENSOR _UxGT("Capteur fil.")
|
|
#define MSG_ERR_HOMING_FAILED _UxGT("Echec origine")
|
|
#define MSG_ERR_PROBING_FAILED _UxGT("Echec sonde")
|
|
#define MSG_M600_TOO_COLD _UxGT("M600: Trop froid")
|
|
#define MSG_MMU2_FILAMENT_CHANGE_HEADER _UxGT("CHANGER FILAMENT")
|
|
#define MSG_MMU2_CHOOSE_FILAMENT_HEADER _UxGT("CHOISIR FILAMENT")
|
|
#define MSG_MMU2_MENU _UxGT("MMU")
|
|
#define MSG_MMU2_WRONG_FIRMWARE _UxGT("Update MMU firmware!")
|
|
#define MSG_MMU2_NOT_RESPONDING _UxGT("MMU ne répond plus")
|
|
#define MSG_MMU2_RESUME _UxGT("Continuer impr.")
|
|
#define MSG_MMU2_RESUMING _UxGT("Reprise...")
|
|
#define MSG_MMU2_LOAD_FILAMENT _UxGT("Charger filament")
|
|
#define MSG_MMU2_LOAD_ALL _UxGT("Charger tous")
|
|
#define MSG_MMU2_LOAD_TO_NOZZLE _UxGT("Charger dans buse")
|
|
#define MSG_MMU2_EJECT_FILAMENT _UxGT("Ejecter filament")
|
|
#define MSG_MMU2_EJECT_FILAMENT0 _UxGT("Ejecter fil. 1")
|
|
#define MSG_MMU2_EJECT_FILAMENT1 _UxGT("Ejecter fil. 2")
|
|
#define MSG_MMU2_EJECT_FILAMENT2 _UxGT("Ejecter fil. 3")
|
|
#define MSG_MMU2_EJECT_FILAMENT3 _UxGT("Ejecter fil. 4")
|
|
#define MSG_MMU2_EJECT_FILAMENT4 _UxGT("Ejecter fil. 5")
|
|
#define MSG_MMU2_UNLOAD_FILAMENT _UxGT("Retrait filament")
|
|
#define MSG_MMU2_LOADING_FILAMENT _UxGT("Chargem. fil. %i...")
|
|
#define MSG_MMU2_EJECTING_FILAMENT _UxGT("Ejection fil...")
|
|
#define MSG_MMU2_UNLOADING_FILAMENT _UxGT("Retrait fil....")
|
|
#define MSG_MMU2_ALL _UxGT("Tous")
|
|
#define MSG_MMU2_FILAMENT0 _UxGT("Filament 1")
|
|
#define MSG_MMU2_FILAMENT1 _UxGT("Filament 2")
|
|
#define MSG_MMU2_FILAMENT2 _UxGT("Filament 3")
|
|
#define MSG_MMU2_FILAMENT3 _UxGT("Filament 4")
|
|
#define MSG_MMU2_FILAMENT4 _UxGT("Filament 5")
|
|
#define MSG_MMU2_RESET _UxGT("Réinit. MMU")
|
|
#define MSG_MMU2_RESETTING _UxGT("Réinit. MMU...")
|
|
#define MSG_MMU2_EJECT_RECOVER _UxGT("Retrait, click")
|
|
|
|
#define MSG_MIX _UxGT("Mix")
|
|
#define MSG_MIX_COMPONENT _UxGT("Composante")
|
|
#define MSG_MIXER _UxGT("Mixeur")
|
|
#define MSG_GRADIENT _UxGT("Dégradé")
|
|
#define MSG_FULL_GRADIENT _UxGT("Dégradé complet")
|
|
#define MSG_TOGGLE_MIX _UxGT("Toggle mix")
|
|
#define MSG_CYCLE_MIX _UxGT("Cycle mix")
|
|
#define MSG_GRADIENT_MIX _UxGT("Mix dégradé")
|
|
#define MSG_REVERSE_GRADIENT _UxGT("Inverser dégradé")
|
|
#define MSG_ACTIVE_VTOOL _UxGT("Active V-tool")
|
|
#define MSG_START_VTOOL _UxGT("Début V-tool")
|
|
#define MSG_END_VTOOL _UxGT(" Fin V-tool")
|
|
#define MSG_GRADIENT_ALIAS _UxGT("Alias V-tool")
|
|
#define MSG_RESET_VTOOLS _UxGT("Réinit. V-tools")
|
|
#define MSG_COMMIT_VTOOL _UxGT("Valider Mix V-tool")
|
|
#define MSG_VTOOLS_RESET _UxGT("V-tools réinit. ok")
|
|
#define MSG_START_Z _UxGT("Début Z")
|
|
#define MSG_END_Z _UxGT(" Fin Z")
|
|
#define MSG_GAMES _UxGT("Jeux")
|
|
#define MSG_BRICKOUT _UxGT("Casse-briques")
|
|
#define MSG_INVADERS _UxGT("Invaders")
|
|
#define MSG_SNAKE _UxGT("Sn4k3")
|
|
#define MSG_MAZE _UxGT("Labyrinthe")
|
|
|
|
#if LCD_HEIGHT >= 4
|
|
// Up to 3 lines allowed
|
|
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Presser bouton")
|
|
#define MSG_ADVANCED_PAUSE_WAITING_2 _UxGT("pour reprendre")
|
|
#define MSG_PAUSE_PRINT_INIT_1 _UxGT("Parking...")
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente filament")
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("pour démarrer")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer filament")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("pr chauffer la buse")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Buse en chauffe")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Patienter SVP...")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("retrait du filament")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Attente")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("chargement filament")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Attente")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("Purge filament")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Presser pour finir")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_2 _UxGT("la purge du filament")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Attente reprise")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("impression")
|
|
#else // LCD_HEIGHT < 4
|
|
// Up to 2 lines allowed
|
|
#define MSG_ADVANCED_PAUSE_WAITING_1 _UxGT("Presser pr continuer")
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Patience...")
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insérer fil.")
|
|
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Chauffer ?")
|
|
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Chauffage...")
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Retrait fil...")
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Chargement...")
|
|
#define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Purge...")
|
|
#define MSG_FILAMENT_CHANGE_CONT_PURGE_1 _UxGT("Terminer ?")
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Reprise...")
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#define MSG_TMC_DRIVERS _UxGT("Drivers TMC")
|
|
#define MSG_TMC_CURRENT _UxGT("Courant driver")
|
|
#define MSG_TMC_HYBRID_THRS _UxGT("Seuil hybride")
|
|
#define MSG_TMC_HOMING_THRS _UxGT("Home sans capteur")
|
|
#define MSG_TMC_STEPPING_MODE _UxGT("Mode pas à pas")
|
|
#define MSG_TMC_STEALTH_ENABLED _UxGT("StealthChop activé")
|
|
#define MSG_SERVICE_RESET _UxGT("Réinit.")
|
|
#define MSG_SERVICE_IN _UxGT(" dans:")
|
|
#define MSG_BACKLASH _UxGT("Backlash")
|
|
#define MSG_BACKLASH_CORRECTION _UxGT("Correction")
|
|
#define MSG_BACKLASH_SMOOTHING _UxGT("Lissage")
|