87 lines
2.6 KiB
C
87 lines
2.6 KiB
C
/*
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Brainwave Pro pin assignments (AT90USB1286)
|
|
*
|
|
* Requires hardware bundle for Arduino:
|
|
* https://github.com/unrepentantgeek/brainwave-arduino
|
|
*/
|
|
|
|
#ifndef __AVR_AT90USB1286__
|
|
#error Oops! Make sure you have 'Brainwave Pro' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
|
|
#include "fastio.h"
|
|
|
|
#ifndef AT90USBxx_TEENSYPP_ASSIGNMENTS // use Teensyduino Teensy++2.0 pin assignments instead of Marlin alphabetical.
|
|
#error Uncomment #define AT90USBxx_TEENSYPP_ASSIGNMENTS in fastio.h for this config
|
|
#endif
|
|
|
|
#define LARGE_FLASH true
|
|
|
|
#define X_STEP_PIN 33
|
|
#define X_DIR_PIN 32
|
|
#define X_ENABLE_PIN 11
|
|
#define X_STOP_PIN 47
|
|
|
|
#define Y_STEP_PIN 31
|
|
#define Y_DIR_PIN 30
|
|
#define Y_ENABLE_PIN 8
|
|
#define Y_STOP_PIN 18
|
|
|
|
#define Z_STEP_PIN 29
|
|
#define Z_DIR_PIN 28
|
|
#define Z_ENABLE_PIN 37
|
|
#define Z_MAX_PIN 36
|
|
#define Z_MIN_PROBE_PIN 17 // Bed Z probe
|
|
|
|
#define E0_STEP_PIN 35
|
|
#define E0_DIR_PIN 34
|
|
#define E0_ENABLE_PIN 13
|
|
|
|
#define HEATER_0_PIN 15
|
|
#define HEATER_1_PIN -1
|
|
#define HEATER_2_PIN -1
|
|
#define HEATER_BED_PIN 14 // Bed
|
|
#define FAN_PIN 16 // Fan, PWM
|
|
|
|
#define TEMP_0_PIN 2 // Extruder / Analog pin numbering
|
|
#define TEMP_1_PIN 1 // Spare / Analog pin numbering
|
|
#define TEMP_2_PIN -1
|
|
#define TEMP_BED_PIN 0 // Bed / Analog pin numbering
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 20
|
|
#define LED_PIN 19
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define SD_DETECT_PIN 12
|
|
|
|
#if DISABLED(SDSUPPORT)
|
|
// these pins are defined in the SD library if building with SD support
|
|
#define SCK_PIN 21
|
|
#define MISO_PIN 23
|
|
#define MOSI_PIN 22
|
|
#endif
|
|
|