77 lines
2.6 KiB
C
77 lines
2.6 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Leapfrog Driver board pin assignments
|
|
*/
|
|
|
|
#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
|
|
#error Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu.
|
|
#endif
|
|
|
|
#define X_STEP_PIN 28
|
|
#define X_DIR_PIN 63
|
|
#define X_ENABLE_PIN 29
|
|
#define X_MIN_PIN 47
|
|
#define X_MAX_PIN 2 //Max endstops default to disabled "-1", set to commented value to enable.
|
|
|
|
#define Y_STEP_PIN 14 // A6
|
|
#define Y_DIR_PIN 15 // A0
|
|
#define Y_ENABLE_PIN 39
|
|
#define Y_MIN_PIN 48
|
|
#define Y_MAX_PIN 15
|
|
|
|
#define Z_STEP_PIN 31 // A2
|
|
#define Z_DIR_PIN 32 // A6
|
|
#define Z_ENABLE_PIN 30 // A1
|
|
#define Z_MIN_PIN 49
|
|
#define Z_MAX_PIN -1
|
|
|
|
#define E0_STEP_PIN 34 //34
|
|
#define E0_DIR_PIN 35 //35
|
|
#define E0_ENABLE_PIN 33 //33
|
|
|
|
#define E1_STEP_PIN 37 //37
|
|
#define E1_DIR_PIN 40 //40
|
|
#define E1_ENABLE_PIN 36 //36
|
|
|
|
#define SDPOWER -1
|
|
#define SDSS 11
|
|
#define SD_DETECT_PIN -1 // 10 optional also used as mode pin
|
|
#define LED_PIN 13
|
|
#define FAN_PIN 7
|
|
#define PS_ON_PIN -1
|
|
#define KILL_PIN -1
|
|
#define SOL1_PIN 16
|
|
#define SOL2_PIN 17
|
|
|
|
#define HEATER_0_PIN 9
|
|
#define HEATER_1_PIN 8 // 12
|
|
#define HEATER_2_PIN 11 //-1 // 13
|
|
#define TEMP_0_PIN 13 //D27 // MUST USE ANALOG INPUT NUMBERING NOT DIGITAL OUTPUT NUMBERING!!!!!!!!!
|
|
#define TEMP_1_PIN 15 // 1
|
|
#define TEMP_2_PIN -1 // 2
|
|
#define HEATER_BED_PIN 10 // 14/15
|
|
#define TEMP_BED_PIN 14 // 1,2 or I2C
|
|
/* Unused (1) (2) (3) 4 5 6 7 8 9 10 11 12 13 (14) (15) (16) 17 (18) (19) (20) (21) (22) (23) 24 (25) (26) (27) 28 (29) (30) (31) */
|
|
|