Marlin_Firmware/Marlin/example_configurations/Velleman/K8400
C. Scott Ananian 890e7a16a9 Add support for Printrbot Neopixel RGBW strip.
Connected as described at http://printrbot.com/shop/led-strip/

Based on patch by Kelly Anderson <kelly@xilka.com> at
http://www.xilka.com/printrbot/marlin/1.1.4/20170707/
2017-07-22 16:07:55 -05:00
..
Dual-head Add support for Printrbot Neopixel RGBW strip. 2017-07-22 16:07:55 -05:00
Configuration_adv.h Improve FWRETRACT config options and commentary 2017-07-20 22:57:50 -05:00
Configuration.h Add support for Printrbot Neopixel RGBW strip. 2017-07-22 16:07:55 -05:00
README.md Arrange example configurations by vendor 2017-07-07 04:48:23 -05:00

Configuration for Velleman K8400 Vertex

http://www.k8400.eu/

Configuration files for the K8400, ported upstream from the official Velleman firmware. Like its predecessor, (K8200), the K8400 is a 3Drag clone. There are some minor differences, documented in pins_K8400.h.

Single and dual head configurations provided. Copy the correct Configuration.h and Configuration_adv.h to the /Marlin/ directory.

NOTE: This configuration includes the community sourced feed rate fix. Use 100% feed rate in Repetier!

For implementation and updated K8400 firmware, see https://github.com/birkett/Velleman-K8400-Firmware

Original Sources

Credit to Velleman for the original 1.0.x based code:
http://www.vertex3dprinter.eu/downloads/files/vertex/firmware/vertex-m1-v1.4-h2.zip