Marlin_Firmware/Marlin/language_bg.h
2017-05-28 14:32:07 -05:00

144 lines
8.9 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Bulgarian
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_BG_H
#define LANGUAGE_BG_H
#define MAPPER_D0D1 // For Cyrillic
#define DISPLAY_CHARSET_ISO10646_5
#define WELCOME_MSG MACHINE_NAME _UxGT(" Готов.")
#define MSG_SD_INSERTED _UxGT("Картата е поставена")
#define MSG_SD_REMOVED _UxGT("Картата е извадена")
#define MSG_MAIN _UxGT("Меню")
#define MSG_AUTOSTART _UxGT("Автостарт")
#define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели")
#define MSG_AUTO_HOME _UxGT("Паркиране")
#define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало")
#define MSG_SET_ORIGIN _UxGT("Изходна точка")
#define MSG_PREHEAT_1 _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_N _UxGT("Подгряване PLA")
#define MSG_PREHEAT_1_ALL _UxGT("Подгр. PLA Всички")
#define MSG_PREHEAT_1_BEDONLY _UxGT("Подгр. PLA Легло")
#define MSG_PREHEAT_1_SETTINGS _UxGT("Настройки PLA")
#define MSG_PREHEAT_2 _UxGT("Подгряване ABS")
#define MSG_PREHEAT_2_N _UxGT("Подгряване ABS")
#define MSG_PREHEAT_2_ALL _UxGT("Подгр. ABS Всички")
#define MSG_PREHEAT_2_BEDONLY _UxGT("Подгр. ABS Легло")
#define MSG_PREHEAT_2_SETTINGS _UxGT("Настройки ABS")
#define MSG_COOLDOWN _UxGT("Охлаждане")
#define MSG_SWITCH_PS_ON _UxGT("Вкл. захранване")
#define MSG_SWITCH_PS_OFF _UxGT("Изкл. захранване")
#define MSG_EXTRUDE _UxGT("Екструзия")
#define MSG_RETRACT _UxGT("Откат")
#define MSG_MOVE_AXIS _UxGT("Движение по ос")
#define MSG_BED_LEVELING _UxGT("Нивелиране")
#define MSG_LEVEL_BED _UxGT("Нивелиране")
#define MSG_MOVE_X _UxGT("Движение по X")
#define MSG_MOVE_Y _UxGT("Движение по Y")
#define MSG_MOVE_Z _UxGT("Движение по Z")
#define MSG_MOVE_E _UxGT("Екструдер")
#define MSG_MOVE_01MM _UxGT("Премести с 0.1mm")
#define MSG_MOVE_1MM _UxGT("Премести с 1mm")
#define MSG_MOVE_10MM _UxGT("Премести с 10mm")
#define MSG_SPEED _UxGT("Скорост")
#define MSG_BED_Z _UxGT("Bed Z")
#define MSG_NOZZLE LCD_STR_THERMOMETER _UxGT(" Дюза")
#define MSG_BED LCD_STR_THERMOMETER _UxGT(" Легло")
#define MSG_FAN_SPEED _UxGT("Вентилатор")
#define MSG_FLOW _UxGT("Поток")
#define MSG_CONTROL _UxGT("Управление")
#define MSG_MIN LCD_STR_THERMOMETER _UxGT(" Минимум")
#define MSG_MAX LCD_STR_THERMOMETER _UxGT(" Максимум")
#define MSG_FACTOR LCD_STR_THERMOMETER _UxGT(" Фактор")
#define MSG_AUTOTEMP _UxGT("Авто-темп.")
#define MSG_ON _UxGT("Вкл. ")
#define MSG_OFF _UxGT("Изкл. ")
#define MSG_A_RETRACT _UxGT("A-откат")
#define MSG_A_TRAVEL _UxGT("A-travel")
#define MSG_STEPS_PER_MM _UxGT("Стъпки/mm")
#define MSG_XSTEPS _UxGT("X стъпки/mm")
#define MSG_YSTEPS _UxGT("Y стъпки/mm")
#define MSG_ZSTEPS _UxGT("Z стъпки/mm")
#define MSG_ESTEPS _UxGT("E стъпки/mm")
#define MSG_E1STEPS _UxGT("E1 стъпки/mm")
#define MSG_E2STEPS _UxGT("E2 стъпки/mm")
#define MSG_E3STEPS _UxGT("E3 стъпки/mm")
#define MSG_E4STEPS _UxGT("E4 стъпки/mm")
#define MSG_E5STEPS _UxGT("E5 стъпки/mm")
#define MSG_TEMPERATURE _UxGT("Температура")
#define MSG_MOTION _UxGT("Движение")
#define MSG_FILAMENT _UxGT("Нишка")
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#define MSG_FILAMENT_DIAM _UxGT("Диам. нишка")
#define MSG_CONTRAST _UxGT("LCD контраст")
#define MSG_STORE_EEPROM _UxGT("Запази в EPROM")
#define MSG_LOAD_EEPROM _UxGT("Зареди от EPROM")
#define MSG_RESTORE_FAILSAFE _UxGT("Фабрични настройки")
#define MSG_REFRESH LCD_STR_REFRESH _UxGT("Обнови")
#define MSG_WATCH _UxGT("Преглед")
#define MSG_PREPARE _UxGT("Действия")
#define MSG_TUNE _UxGT("Настройка")
#define MSG_PAUSE_PRINT _UxGT("Пауза")
#define MSG_RESUME_PRINT _UxGT("Възобнови печата")
#define MSG_STOP_PRINT _UxGT("Спри печата")
#define MSG_CARD_MENU _UxGT("Меню карта")
#define MSG_NO_CARD _UxGT("Няма карта")
#define MSG_DWELL _UxGT("Почивка...")
#define MSG_USERWAIT _UxGT("Изчакване")
#define MSG_RESUMING _UxGT("Продълж. печата")
#define MSG_PRINT_ABORTED _UxGT("Печатът е прекъснат")
#define MSG_NO_MOVE _UxGT("Няма движение")
#define MSG_KILLED _UxGT("УБИТО.")
#define MSG_STOPPED _UxGT("СПРЯНО.")
#define MSG_CONTROL_RETRACT _UxGT("Откат mm")
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Смяна Откат mm")
#define MSG_CONTROL_RETRACTF _UxGT("Откат V")
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Скок mm")
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("Възврат mm")
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Смяна Възврат mm")
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("Възврат V")
#define MSG_AUTORETRACT _UxGT("Автоoткат")
#define MSG_FILAMENTCHANGE _UxGT("Смяна нишка")
#define MSG_INIT_SDCARD _UxGT("Иниц. SD-Карта")
#define MSG_CNG_SDCARD _UxGT("Смяна SD-Карта")
#define MSG_ZPROBE_OUT _UxGT("Z-сондата е извадена")
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Отстояние")
#define MSG_BABYSTEP_X _UxGT("Министъпка X")
#define MSG_BABYSTEP_Y _UxGT("Министъпка Y")
#define MSG_BABYSTEP_Z _UxGT("Министъпка Z")
#define MSG_ENDSTOP_ABORT _UxGT("Стоп Кр.Изключватели")
#define MSG_DELTA_CALIBRATE _UxGT("Делта Калибровка")
#define MSG_DELTA_CALIBRATE_X _UxGT("Калибровка X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Калибровка Y")
#define MSG_DELTA_CALIBRATE_Z _UxGT("Калибровка Z")
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Калибровка Център")
#endif // LANGUAGE_BG_H