Marlin_Firmware/Marlin/pins_BQ_ZUM_MEGA_3D.h
Anthony Birkett 7a377c1d75 Add "About Printer" information menu.
Includes:
  *firmware version / branch / date.
  *extruder count
  *board information (name, serial details, power supply type)
  *thermistors (names, min/max temperatures)
  *printer statistics (PRINTCOUNTER details)

Thanks to @thinkyhead for contributions.
2016-07-02 15:22:26 -07:00

70 lines
1.8 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* bq ZUM Mega 3D board definition
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Make sure you have 'Arduino Mega 2560' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "ZUM Mega 3D"
#include "pins_RAMPS_13.h"
#undef X_MAX_PIN
#define X_MAX_PIN 79 // 2
#undef Z_ENABLE_PIN
#define Z_ENABLE_PIN 77 // 62
#undef FAN_PIN
#define FAN_PIN 12 // 4
#undef HEATER_0_PIN
#define HEATER_0_PIN 9 // 10
#undef HEATER_1_PIN
#define HEATER_1_PIN 10 // 9
#undef TEMP_1_PIN
#define TEMP_1_PIN 14 // 15
#undef TEMP_BED_PIN
#define TEMP_BED_PIN 15 // 14
#define DIGIPOTSS_PIN 22
#define DIGIPOT_CHANNELS { 4, 5, 3, 0, 1 }
#define FAN1_PIN 7
#undef PS_ON_PIN // 12
#define PS_ON_PIN 81 // External Power Supply
#if ENABLED(AUTO_BED_LEVELING_FEATURE)
#undef Z_MIN_PIN
#undef Z_MAX_PIN
#define Z_MIN_PIN 19 // IND_S_5V
#define Z_MAX_PIN 18 // Z-MIN Label
#endif