Marlin_Firmware/Marlin/src/pins/ramps/pins_ZRIB_V52.h
2022-06-05 23:11:32 -05:00

160 lines
4.8 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* ZRIB V5.2 Based on MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "ZRIB V5.2 supports up to 2 hotends / E steppers."
#endif
#define BOARD_INFO_NAME "ZRIB V5.2"
#define MKS_BASE_VERSION 14
//
// Heaters / Fans
//
#define HEATER_1_PIN 7
#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
#define FAN1_PIN 6
//
// Extra Extruder / Stepper for V5.2
//
#define E2_STEP_PIN 4
#define E2_DIR_PIN 5
#define E2_ENABLE_PIN 22
#include "pins_MKS_BASE_common.h" // ... RAMPS
/**
* Available connectors on MKS BASE v1.4 (Basically same as ZRIB V5.2)
*
* =======
* | GND |
* |-----| E0
* | 10 | (10) PB4 ** Pin23 ** PWM10
* |-----|
* | GND |
* |-----| E1
* | 7 | ( 7) PH4 ** Pin16 ** PWM7
* |-----|
* | GND |
* |-----| FAN
* | 9 | ( 9) PH6 ** Pin18 ** PWM9
* =======
*
* =======
* | GND |
* |-----| Heated Bed
* | 8 | ( 8) PH5 ** Pin17 ** PWM8
* =======
*
* ==========
* | 12-24V |
* |--------| Power
* | GND |
* ==========
*
* XS3 Connector
* =================
* | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
* |----|-----|----|
* | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
* =================
*
* Servos Connector
* =================
* | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
* |----|-----|----|
* | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
* =================
*
* ICSP
* =================
* | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
* |----|----|-----|
* | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
* ================= (52) PB1 ** Pin20 ** SPI_SCK
*
* XS6/AUX-1 Connector
* ======================
* | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
* |----|-----|----|----|
* | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
* ====================== (51) PB2 ** Pin21 ** SPI_MOSI
* (52) PB1 ** Pin20 ** SPI_SCK
* (21) PD0 ** Pin43 ** I2C_SCL
*
* Temperature
* ==================================
* | GND | 69 | GND | 68 | GND | 67 |
* ==================================
* (69) PK7 ** Pin82 ** A15
* (68) PK6 ** Pin83 ** A14
* (67) PK5 ** Pin84 ** A13
*
* Limit Switches
* ============
* | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
* |----|-----|
* | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
* |----|-----|
* | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
* |----|-----|
* | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
* |----|-----|
* | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
* |----|-----|
* | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
* ============
*
* EXP1
* ============
* | 37 | 35 | (37) PC0 ** Pin53 ** D37
* |-----|----| (35) PC2 ** Pin55 ** D35
* | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
* |-----|----| (16) PH1 ** Pin13 ** USART2_TX
* | 23 | 25 | (23) PA1 ** Pin77 ** D23
* |-----|----| (25) PA3 ** Pin75 ** D25
* | 27 | 29 | (27) PA5 ** Pin73 ** D27
* |-----|----| (29) PA7 ** Pin71 ** D29
* | GND | 5V |
* ============
*
* EXP2
* ============
* | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
* |-----|----| (52) PB1 ** Pin20 ** SPI_SCK
* | 31 | 53 | (31) PC6 ** Pin59 ** D31
* |-----|----| (53) PB0 ** Pin19 ** SPI_SS
* | 33 | 51 | (33) PC4 ** Pin57 ** D33
* |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
* | 49 | 41 | (49) PL0 ** Pin35 ** D49
* |-----|----| (41) PG0 ** Pin51 ** D41
* | GND | NC |
* ============
*/