57 lines
2.3 KiB
C
57 lines
2.3 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Test Arduino Due specific configuration values for errors at compile-time.
|
|
*/
|
|
|
|
/**
|
|
* HARDWARE VS. SOFTWARE SPI COMPATIBILITY
|
|
*
|
|
* DUE selects hardware vs. software SPI depending on whether one of the hardware-controllable SDSS pins is in use.
|
|
*
|
|
* The hardware SPI controller doesn't allow software SPIs to control any shared pins.
|
|
*
|
|
* When DUE software SPI is used then Trinamic drivers must use the TMC softSPI.
|
|
*
|
|
* When DUE hardware SPI is used then a Trinamic driver can use either its hardware SPI or, if there are no shared
|
|
* pins, its software SPI.
|
|
*
|
|
* Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
|
|
* as the TMC2130 soft SPI the most common setup.
|
|
*/
|
|
#define _IS_HW_SPI(P) (defined(TMC_SW_##P) && (TMC_SW_##P == MOSI_PIN || TMC_SW_##P == MISO_PIN || TMC_SW_##P == SCK_PIN))
|
|
|
|
#if ENABLED(SDSUPPORT) && HAS_DRIVER(TMC2130)
|
|
#if ENABLED(TMC_USE_SW_SPI)
|
|
#if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
|
|
#error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
|
|
#endif
|
|
#elif ENABLED(DUE_SOFTWARE_SPI)
|
|
#error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(FAST_PWM_FAN)
|
|
#error "FAST_PWM_FAN is not yet implemented for this platform."
|
|
#endif
|