bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin/src/feature
History
Scott Lahteine 78c2eb6876 🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
..
bedlevel
🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
dac
🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
digipot
MCP4451 Digipot Support for Azteeg X5 GT (#21680)
2021-04-24 00:59:31 -05:00
leds
🐛 Fix dual Neopixels (#22174)
2021-06-21 16:26:38 -05:00
mmu
🐛 Fix MMU compile with >5 EXTRUDERS (#22036)
2021-06-14 23:51:17 -05:00
password
Fix password menu stickiness before first auth (#21295)
2021-03-10 16:02:35 -06:00
ammeter.cpp
🎨 Laser Ammeter followup (#22079)
2021-06-15 00:09:52 -05:00
ammeter.h
🎨 Laser Ammeter followup (#22079)
2021-06-15 00:09:52 -05:00
babystep.cpp
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
babystep.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
backlash.cpp
♻️ Refactor axis counts and loops
2021-05-22 16:08:08 -05:00
backlash.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
baricuda.cpp
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
baricuda.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
binary_stream.cpp
Optimize G-code / feature dependencies (#18919)
2020-08-06 08:14:00 -05:00
binary_stream.h
🚑️ Prevent BFT unaligned compressed data corruption (#22134)
2021-06-15 00:12:23 -05:00
bltouch.cpp
Serial refactor. Default 8-bit ECHO to int, not char (#20985)
2021-02-08 00:37:24 -06:00
bltouch.h
Optimize BLTouch code for size (#21477)
2021-03-29 20:56:44 -05:00
cancel_object.cpp
Make Cancel Objects reporting optional (#21698)
2021-04-26 18:32:13 -05:00
cancel_object.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
caselight.cpp
♻️ LEDs refactor and extend (#21962)
2021-05-29 15:11:32 -05:00
caselight.h
Patches for CASE_LIGHT_USE_RGB_LED (#21811)
2021-05-15 15:05:53 -05:00
closedloop.cpp
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
closedloop.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
controllerfan.cpp
Fix Arduino DUE compilation (#20058)
2020-11-10 03:32:08 -06:00
controllerfan.h
Fix Arduino DUE compilation (#20058)
2020-11-10 03:32:08 -06:00
cooler.cpp
Laser Coolant Flow Meter / Safety Shutdown (#21431)
2021-03-29 01:41:56 -05:00
cooler.h
🐛 Fix flowmeter calculation (#21959)
2021-05-24 01:54:39 -05:00
direct_stepping.cpp
Fix some serial char, echo
2021-02-04 19:20:28 -06:00
direct_stepping.h
General cleanup, use _BV
2021-01-16 22:53:50 -06:00
e_parser.cpp
Handle M410 in the main task (#19752)
2020-10-16 16:11:00 -05:00
e_parser.h
Soft Reset via Serial or post-kill button click (#21652)
2021-04-24 02:53:52 -05:00
encoder_i2c.cpp
♻️ Refactor Linear / Logical / Distinct Axes (#21953)
2021-06-15 00:03:55 -05:00
encoder_i2c.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
ethernet.cpp
Number serial from 1 to match settings
2021-03-10 13:45:53 -06:00
ethernet.h
Teensy 4.1 Ethernet support (#19801)
2020-10-20 14:35:29 -05:00
fanmux.cpp
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
fanmux.h
Remove extraneous 'extern' hints (#21516)
2021-04-02 14:22:43 -05:00
filwidth.cpp
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
filwidth.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
fwretract.cpp
🎨 Macros for optional arguments (#21969)
2021-05-29 15:09:07 -05:00
fwretract.h
🎨 Macros for optional arguments (#21969)
2021-05-29 15:09:07 -05:00
host_actions.cpp
Enable Purge More / Resume with EP + Host Prompt (#21671)
2021-04-22 18:43:28 -05:00
host_actions.h
Tweak a host prompt call
2020-10-19 20:39:36 -05:00
hotend_idle.cpp
Clean up formatting, wrap macros
2021-04-23 19:21:39 -05:00
hotend_idle.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
joystick.cpp
♻️ Refactor axis counts and loops
2021-05-22 16:08:08 -05:00
joystick.h
🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
max7219.cpp
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
max7219.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
meatpack.cpp
Apply pointer formatting
2021-03-29 20:36:37 -05:00
meatpack.h
Followup to "no status for serial::write" (#21577)
2021-04-10 15:35:45 -05:00
mixing.cpp
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
mixing.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
pause.cpp
Fix and improve Power-Loss Recovery (#21779, #21894)
2021-05-15 15:05:53 -05:00
pause.h
Pause and PLR refinements
2021-05-05 07:31:48 -05:00
power_monitor.cpp
Fix and improve Power Monitor (#21551)
2021-04-13 15:17:52 -05:00
power_monitor.h
Fix and improve Power Monitor (#21551)
2021-04-13 15:17:52 -05:00
power.cpp
🐛 No HOTEND_LOOP with EXTRUDERS 0 (#22245)
2021-06-28 19:50:00 -05:00
power.h
Add POWER_OFF_DELAY option (#19987)
2020-11-08 18:37:41 -06:00
powerloss.cpp
🎨 Move HAS_EXTRUDERS
2021-05-22 16:18:42 -05:00
powerloss.h
🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
probe_temp_comp.cpp
Add whole-degree accessors, simplify some temperature-related features (#21685)
2021-04-23 20:19:23 -05:00
probe_temp_comp.h
🐛 Use whole PROBE_TEMP_COMPENSATION values (#22130)
2021-06-15 00:11:34 -05:00
repeat.cpp
Serial refactor. Default 8-bit ECHO to int, not char (#20985)
2021-02-08 00:37:24 -06:00
repeat.h
Add "End Repeat Loops" menu item
2020-12-23 20:24:34 -06:00
runout.cpp
Filament Runout handling for Mixing Extruder (#20327)
2021-02-28 20:16:22 -06:00
runout.h
Add and apply REPEAT_1 macro
2021-05-15 15:05:53 -05:00
solenoid.cpp
Don't apply hotend_offset.z to Z soft endstops (#20675)
2021-01-04 23:48:42 -06:00
solenoid.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
spindle_laser_types.h
Laser Test Fire (#20452)
2021-01-10 06:01:25 -06:00
spindle_laser.cpp
🎨 Laser Ammeter followup (#22079)
2021-06-15 00:09:52 -05:00
spindle_laser.h
Laser Cutter Air Assist (#21753)
2021-05-02 02:19:42 -05:00
stepper_driver_safety.cpp
BTT SKR V2.0 / Stepper Driver Anti-Reverse Protection (#21503)
2021-04-27 02:22:09 -05:00
stepper_driver_safety.h
BTT SKR V2.0 / Stepper Driver Anti-Reverse Protection (#21503)
2021-04-27 02:22:09 -05:00
tmc_util.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-15 00:05:03 -05:00
tmc_util.h
🎨 Check flags without ENABLED
2021-07-17 01:54:27 -05:00
tramming.cpp
Up to 6 Tramming points (#20720)
2021-01-08 18:42:08 -06:00
tramming.h
Up to 6 Tramming points (#20720)
2021-01-08 18:42:08 -06:00
twibus.cpp
Serial macros cleanup
2021-02-28 20:02:24 -06:00
twibus.h
Move some MarlinCore and MarlinUI code (#20832)
2021-01-21 03:40:07 -06:00
z_stepper_align.cpp
Document, adjust some homing code
2021-01-02 03:41:06 -06:00
z_stepper_align.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00