Marlin_Firmware

arduino_due_x.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

compiler.h

add USEABLE_HARDWARE_PWM & clear up some compiler warnings

2018-01-24 21:42:36 -06:00

conf_access.h

[2.0.x]DUE: Fix includes for SDSUPPORT (#9112 )

2018-01-10 00:46:34 -06:00

conf_clock.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

conf_usb.h

can't type

2018-03-17 13:07:49 -05:00

ctrl_access.c

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

ctrl_access.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

genclk.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

mrepeat.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

osc.h

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

pll.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

preprocessor.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

sbc_protocol.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

sd_mmc_spi_mem.cpp

Use serial macro in sd_mmc_spi_mem.cpp for Due

2018-02-16 17:57:24 -06:00

sd_mmc_spi_mem.h

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

spc_protocol.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

stringz.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

sysclk.c

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

sysclk.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

tpaste.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

udc_desc.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

udc.c

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

udc.h

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

udd.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

udi_cdc.c

DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin

2018-03-15 00:56:28 -03:00

udi_cdc.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

udi_composite_desc.c

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

udi_msc.c

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

udi_msc.h

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

udi.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

uotghs_device_due.c

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

uotghs_device_due.h

Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)

2017-12-21 02:42:46 -03:00

uotghs_otg.h

Trailing whitespace clean

2018-01-05 10:11:31 -06:00

usb_protocol_cdc.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

usb_protocol_msc.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

usb_protocol.h

Fix DUE incompatible enum type specification (#10017 )

2018-03-09 02:17:57 -06:00

usb_task.c

DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin

2018-03-15 00:56:28 -03:00

usb_task.h

DUE USB CDC: Do not send any character if no program on the PC is listening to them. This avoids Marlin waiting until the user actually opens a program that is able to consume the output of Marlin

2018-03-15 00:56:28 -03:00