72d8adfd1e
- Add `axis_t`, `extruder_t`, `heater_t`, and `fan_t` to eliminate ambiguity, improve type safety. - Regularized getter/setter argument order and naming. - `setAxisPosition` no longer stacks moves in the buffer, allowing it to be called repeatedly on each touch ui tap. - Implement better manual moves for `EXTENSIBLE_UI` (#12205) - Calling `setAxisPosition_mm` no longer buffers the entire move to the new position, but instead causes small moves towards it to be made during the idle loop. This allows the user to adjust the destination even after the move has started and makes the UI feel much more responsive. - As suggested by @ejtagle, the new code keeps the planner buffer full to ensure smooth motion without stops and starts. - Change `En`, `Hn` and `FANn` to zero-based indices. - Labels consistent with the rest of Marlin code.
265 lines
8.9 KiB
C++
265 lines
8.9 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/************
|
|
* ui_api.h *
|
|
************/
|
|
|
|
/****************************************************************************
|
|
* Written By Marcio Teixeira 2018 - Aleph Objects, Inc. *
|
|
* *
|
|
* This program is free software: you can redistribute it and/or modify *
|
|
* it under the terms of the GNU General Public License as published by *
|
|
* the Free Software Foundation, either version 3 of the License, or *
|
|
* (at your option) any later version. *
|
|
* *
|
|
* This program is distributed in the hope that it will be useful, *
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
|
|
* GNU General Public License for more details. *
|
|
* *
|
|
* To view a copy of the GNU General Public License, go to the following *
|
|
* location: <http://www.gnu.org/licenses/>. *
|
|
****************************************************************************/
|
|
|
|
#pragma once
|
|
|
|
#include "../../inc/MarlinConfig.h"
|
|
|
|
typedef const __FlashStringHelper *progmem_str;
|
|
|
|
namespace UI {
|
|
|
|
enum axis_t : uint8_t { X, Y, Z };
|
|
enum extruder_t : uint8_t { E0, E1, E2, E3, E4, E5 };
|
|
enum heater_t : uint8_t { H0, H1, H2, H3, H4, H5, BED };
|
|
enum fan_t : uint8_t { FAN0, FAN1, FAN2, FAN3, FAN4, FAN5 };
|
|
|
|
constexpr uint8_t extruderCount = EXTRUDERS;
|
|
constexpr uint8_t hotendCount = HOTENDS;
|
|
constexpr uint8_t fanCount = FAN_COUNT;
|
|
|
|
bool isMoving();
|
|
bool isAxisPositionKnown(const axis_t);
|
|
bool canMove(const axis_t);
|
|
bool canMove(const extruder_t);
|
|
void enqueueCommands(progmem_str);
|
|
|
|
/**
|
|
* Getters and setters
|
|
* Should be used by the EXTENSIBLE_UI to query or change Marlin's state.
|
|
*/
|
|
progmem_str getFirmwareName_str();
|
|
|
|
float getActualTemp_celsius(const heater_t);
|
|
float getActualTemp_celsius(const extruder_t);
|
|
float getTargetTemp_celsius(const heater_t);
|
|
float getTargetTemp_celsius(const extruder_t);
|
|
float getFan_percent(const fan_t);
|
|
float getAxisPosition_mm(const axis_t);
|
|
float getAxisPosition_mm(const extruder_t);
|
|
float getAxisSteps_per_mm(const axis_t);
|
|
float getAxisSteps_per_mm(const extruder_t);
|
|
float getAxisMaxFeedrate_mm_s(const axis_t);
|
|
float getAxisMaxFeedrate_mm_s(const extruder_t);
|
|
float getAxisMaxAcceleration_mm_s2(const axis_t);
|
|
float getAxisMaxAcceleration_mm_s2(const extruder_t);
|
|
float getMinFeedrate_mm_s();
|
|
float getMinTravelFeedrate_mm_s();
|
|
float getPrintingAcceleration_mm_s2();
|
|
float getRetractAcceleration_mm_s2();
|
|
float getTravelAcceleration_mm_s2();
|
|
float getFeedrate_percent();
|
|
uint8_t getProgress_percent();
|
|
uint32_t getProgress_seconds_elapsed();
|
|
|
|
#if ENABLED(PRINTCOUNTER)
|
|
char* getTotalPrints_str(char buffer[21]);
|
|
char* getFinishedPrints_str(char buffer[21]);
|
|
char* getTotalPrintTime_str(char buffer[21]);
|
|
char* getLongestPrint_str(char buffer[21]);
|
|
char* getFilamentUsed_str(char buffer[21]);
|
|
#endif
|
|
|
|
void setTargetTemp_celsius(const float, const heater_t);
|
|
void setTargetTemp_celsius(const float, const extruder_t);
|
|
void setFan_percent(const float, const fan_t);
|
|
void setAxisPosition_mm(const float, const axis_t);
|
|
void setAxisPosition_mm(const float, const extruder_t);
|
|
void setAxisSteps_per_mm(const float, const axis_t);
|
|
void setAxisSteps_per_mm(const float, const extruder_t);
|
|
void setAxisMaxFeedrate_mm_s(const float, const axis_t);
|
|
void setAxisMaxFeedrate_mm_s(const float, const extruder_t);
|
|
void setAxisMaxAcceleration_mm_s2(const float, const axis_t);
|
|
void setAxisMaxAcceleration_mm_s2(const float, const extruder_t);
|
|
void setFeedrate_mm_s(const float);
|
|
void setMinFeedrate_mm_s(const float);
|
|
void setMinTravelFeedrate_mm_s(const float);
|
|
void setPrintingAcceleration_mm_s2(const float);
|
|
void setRetractAcceleration_mm_s2(const float);
|
|
void setTravelAcceleration_mm_s2(const float);
|
|
void setFeedrate_percent(const float);
|
|
|
|
#if ENABLED(LIN_ADVANCE)
|
|
float getLinearAdvance_mm_mm_s(const extruder_t);
|
|
void setLinearAdvance_mm_mm_s(const float, const extruder_t);
|
|
#endif
|
|
|
|
#if ENABLED(JUNCTION_DEVIATION)
|
|
float getJunctionDeviation_mm();
|
|
void setJunctionDeviation_mm(const float);
|
|
#else
|
|
float getAxisMaxJerk_mm_s(const axis_t);
|
|
float getAxisMaxJerk_mm_s(const extruder_t);
|
|
void setAxisMaxJerk_mm_s(const float, const axis_t);
|
|
void setAxisMaxJerk_mm_s(const float, const extruder_t);
|
|
#endif
|
|
|
|
extruder_t getActiveTool();
|
|
void setActiveTool(const extruder_t, bool no_move);
|
|
|
|
|
|
#if HOTENDS > 1
|
|
float getNozzleOffset_mm(const axis_t, const extruder_t);
|
|
void setNozzleOffset_mm(const float, const axis_t, const extruder_t);
|
|
#endif
|
|
|
|
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
|
float getZOffset_mm();
|
|
void setZOffset_mm(const float);
|
|
void addZOffset_steps(const int16_t);
|
|
#endif
|
|
|
|
#if ENABLED(BACKLASH_GCODE)
|
|
float getAxisBacklash_mm(const axis_t);
|
|
void setAxisBacklash_mm(const float, const axis_t);
|
|
|
|
float getBacklashCorrection_percent();
|
|
void setBacklashCorrection_percent(const float);
|
|
|
|
#ifdef BACKLASH_SMOOTHING_MM
|
|
float getBacklashSmoothing_mm();
|
|
void setBacklashSmoothing_mm(const float);
|
|
#endif
|
|
#endif
|
|
|
|
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
|
bool getFilamentRunoutEnabled();
|
|
void setFilamentRunoutEnabled(const bool);
|
|
|
|
#if FILAMENT_RUNOUT_DISTANCE_MM > 0
|
|
float getFilamentRunoutDistance_mm();
|
|
void setFilamentRunoutDistance_mm(const float);
|
|
#endif
|
|
#endif
|
|
|
|
/**
|
|
* Delay and timing routines
|
|
* Should be used by the EXTENSIBLE_UI to safely pause or measure time
|
|
* safe_millis must be called at least every 1 sec to guarantee time
|
|
* yield should be called within lengthy loops
|
|
*/
|
|
uint32_t safe_millis();
|
|
void delay_us(unsigned long us);
|
|
void delay_ms(unsigned long ms);
|
|
void yield();
|
|
|
|
/**
|
|
* Media access routines
|
|
*
|
|
* Should be used by the EXTENSIBLE_UI to operate on files
|
|
*/
|
|
bool isMediaInserted();
|
|
bool isPrintingFromMediaPaused();
|
|
bool isPrintingFromMedia();
|
|
bool isPrinting();
|
|
|
|
void printFile(const char *filename);
|
|
void stopPrint();
|
|
void pausePrint();
|
|
void resumePrint();
|
|
|
|
class FileList {
|
|
private:
|
|
uint16_t num_files;
|
|
|
|
public:
|
|
FileList();
|
|
void refresh();
|
|
bool seek(uint16_t, bool skip_range_check = false);
|
|
|
|
const char *longFilename();
|
|
const char *shortFilename();
|
|
const char *filename();
|
|
bool isDir();
|
|
|
|
void changeDir(const char *dirname);
|
|
void upDir();
|
|
bool isAtRootDir();
|
|
uint16_t count();
|
|
};
|
|
|
|
/**
|
|
* Event callback routines
|
|
*
|
|
* Should be declared by EXTENSIBLE_UI and will be called by Marlin
|
|
*/
|
|
void onStartup();
|
|
void onIdle();
|
|
void onMediaInserted();
|
|
void onMediaError();
|
|
void onMediaRemoved();
|
|
void onPlayTone(const uint16_t frequency, const uint16_t duration);
|
|
void onPrinterKilled(const char* msg);
|
|
void onPrintTimerStarted();
|
|
void onPrintTimerPaused();
|
|
void onPrintTimerStopped();
|
|
void onFilamentRunout();
|
|
void onStatusChanged(const char* msg);
|
|
void onStatusChanged(progmem_str msg);
|
|
void onFactoryReset();
|
|
void onStoreSettings();
|
|
void onLoadSettings();
|
|
};
|
|
|
|
/**
|
|
* Helper macros to increment or decrement a value. For example:
|
|
*
|
|
* UI_INCREMENT_BY(TargetTemp_celsius, 10, E0)
|
|
*
|
|
* Expands to:
|
|
*
|
|
* setTargetTemp_celsius(getTargetTemp_celsius(E0) + 10, E0);
|
|
*
|
|
* Or, in the case where a constant increment is desired:
|
|
*
|
|
* constexpr float increment = 10;
|
|
*
|
|
* UI_INCREMENT(TargetTemp_celsius, E0)
|
|
*
|
|
*/
|
|
#define UI_INCREMENT_BY(method, inc, ...) UI::set ## method(UI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__)
|
|
#define UI_DECREMENT_BY(method, inc, ...) UI::set ## method(UI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__)
|
|
|
|
#define UI_INCREMENT(method, ...) UI_INCREMENT_BY(method, increment, ##__VA_ARGS__)
|
|
#define UI_DECREMENT(method, ...) UI_DECREMENT_BY(method, increment, ##__VA_ARGS__)
|