bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
69961dbba3
Marlin_Firmware/Marlin
History
stohn 69961dbba3 fixed incorrect menu messages from last commit... 
- removed several multiple definitions of same message
- fixed definition of missing messages in german and spanish
- tweaked german translation (a lot)
- added note about changing and testing this file
2012-08-21 14:44:20 +02:00
..
Gen7 Fix cast warning in Gen7 2012-02-23 18:50:05 +01:00
hardware/tools/avr/etc ATMega1284P support for Arduino IDE 2012-02-17 11:41:47 +01:00
Sanguino Fixed compiler warning for Sanguino compile 2012-02-26 17:35:01 +01:00
cardreader.cpp made prepare->autostart independent of current folder. 2012-03-19 20:24:40 +01:00
cardreader.h __ header file replace 2012-06-02 20:44:17 +02:00
Configuration_adv.h Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
Configuration.h Disable FAST_PWM by default. On some systems it does not work ok. 2012-08-11 15:51:04 +02:00
COPYING first commit 2011-08-12 22:28:35 +02:00
create_speed_lookuptable.py Added 20MHz support. 2012-03-11 12:25:04 +01:00
createTemperatureLookup.py first commit 2011-08-12 22:28:35 +02:00
EEPROMwrite.h Enable M503 also when eeprom is disabled 2012-08-11 15:49:40 +02:00
fastio.h Merge remote-tracking branch 'upstream/Marlin_v1' into Marlin_v1 2012-02-13 13:07:55 +01:00
language.h fixed incorrect menu messages from last commit... 2012-08-21 14:44:20 +02:00
Makefile Makefile: Better display of size (device memory usage) 2012-08-10 19:36:30 +01:00
Marlin.h Merge pull request #208 from Enchiridion/Marlin_v1 2012-08-11 01:42:49 -07:00
Marlin.pde Do not use feedrate multiiply on Z and E only moves. 2012-08-12 18:13:34 +02:00
MarlinSerial.cpp Teensylu support. 2012-02-09 19:27:45 +01:00
MarlinSerial.h Teensylu support. 2012-02-09 19:27:45 +01:00
motion_control.cpp software_endstops: use *_MIN_POS and *_MAX_POS for arcs 2012-08-10 19:36:30 +01:00
motion_control.h Removed interrupt nesting in the stepper ISR. 2011-11-27 21:12:55 +01:00
pins.h Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
planner.cpp Fixed AD595 define 2012-06-11 17:33:42 +02:00
planner.h Residual in the comments: there are no more mm/minutes but only mm/sec in the planner buffer. 2012-05-09 08:05:13 +03:00
Sd2Card.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
Sd2Card.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
Sd2PinMap.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdBaseFile.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
SdBaseFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFatConfig.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFatStructs.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFatUtil.cpp Updated SERIAL define to MYSERIAL, because Arduino 1.0 defines SERIAL as 0. 2012-02-11 16:02:47 +01:00
SdFatUtil.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFile.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdFile.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdInfo.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.cpp made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
SdVolume.h made sd code only compile with SDSUPPORT defined. safes 10k of codespace 2011-12-26 09:28:51 +01:00
speed_lookuptable.h Added 20MHz support. 2012-03-11 12:25:04 +01:00
stepper.cpp Added support for dual Z axis stepper drivers 2012-08-04 00:32:26 -06:00
stepper.h merging 2011-12-12 20:35:46 +01:00
temperature.cpp Add Duty Cycling to the Heater Bed 2012-08-11 09:17:47 +03:00
temperature.h Added support for 2nd extruder temperature to UltraLCD 2012-04-27 14:51:32 +02:00
thermistortables.h Merge pull request #170 from linagee/Marlin_v1 2012-06-02 03:46:56 -07:00
ultralcd.h __ header file replace 2012-06-02 20:44:17 +02:00
ultralcd.pde The pre-heat ABS and PLA options in the LCD Menu were broken a while back. The pre-heat worked fine, but the cooling fans were not switching on as intended. This is now fixed. 2012-08-20 21:49:37 +01:00
watchdog.h __ header file replace 2012-06-02 20:44:17 +02:00
watchdog.pde simplified the includes, makefile now works with arduino23 2011-12-22 14:55:45 +01:00
wiring.h add wiring.h, that can be used to overwrite: 2011-12-22 14:57:28 +01:00