Marlin_Firmware/Marlin/pinsDebug_Teensyduino.h
2017-03-18 03:17:39 -05:00

111 lines
2.9 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
//
// some of the pin mapping functions of the Teensduino extension to the Arduino IDE
// do not function the same as the other Arduino extensions
//
#define TEENSYDUINO_IDE
//digitalPinToTimer(pin) function works like Arduino but Timers are not defined
#define TIMER0B 1
#define TIMER1A 7
#define TIMER1B 8
#define TIMER1C 9
#define TIMER2A 6
#define TIMER2B 2
#define TIMER3A 5
#define TIMER3B 4
#define TIMER3C 3
// digitalPinToPort function just returns the pin number so need to create our own
#define PA 1
#define PB 2
#define PC 3
#define PD 4
#define PE 5
#define PF 6
#undef digitalPinToPort
const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
PD, // 0 - PD0 - INT0 - PWM
PD, // 1 - PD1 - INT1 - PWM
PD, // 2 - PD2 - INT2 - RX
PD, // 3 - PD3 - INT3 - TX
PD, // 4 - PD4
PD, // 5 - PD5
PD, // 6 - PD6
PD, // 7 - PD7
PE, // 8 - PE0
PE, // 9 - PE1
PC, // 10 - PC0
PC, // 11 - PC1
PC, // 12 - PC2
PC, // 13 - PC3
PC, // 14 - PC4 - PWM
PC, // 15 - PC5 - PWM
PC, // 16 - PC6 - PWM
PC, // 17 - PC7
PE, // 18 - PE6 - INT6
PE, // 19 - PE7 - INT7
PB, // 20 - PB0
PB, // 21 - PB1
PB, // 22 - PB2
PB, // 23 - PB3
PB, // 24 - PB4 - PWM
PB, // 25 - PB5 - PWM
PB, // 26 - PB6 - PWM
PB, // 27 - PB7 - PWM
PA, // 28 - PA0
PA, // 29 - PA1
PA, // 30 - PA2
PA, // 31 - PA3
PA, // 32 - PA4
PA, // 33 - PA5
PA, // 34 - PA6
PA, // 35 - PA7
PE, // 36 - PE4 - INT4
PE, // 37 - PE5 - INT5
PF, // 38 - PF0 - A0
PF, // 39 - PF1 - A1
PF, // 40 - PF2 - A2
PF, // 41 - PF3 - A3
PF, // 42 - PF4 - A4
PF, // 43 - PF5 - A5
PF, // 44 - PF6 - A6
PF, // 45 - PF7 - A7
PE, // 46 - PE2 (not defined in teensyduino)
PE, // 47 - PE3 (not defined in teensyduino)
};
#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )
// digitalPinToBitMask(pin) is OK
#define digitalRead_mod(p) digitalRead(p) // Teensyduino's version of digitalRead doesn't
// disable the PWMs so we can use it as is
// portModeRegister(pin) is OK