Marlin_Firmware/Marlin/language_hr.h
Robert Marko b796a687ca Update Croatian to include missing strings
Added all missing strings according to English
2016-12-03 11:15:41 -06:00

236 lines
13 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Croatian (Hrvatski)
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_HR_H
#define LANGUAGE_HR_H
#define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays.
#define WELCOME_MSG MACHINE_NAME " spreman."
#define MSG_SD_INSERTED "SD kartica umetnuta"
#define MSG_SD_REMOVED "SD kartica uklonjena"
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
#define MSG_MAIN "Main"
#define MSG_AUTOSTART "Automatsko pokretanje"
#define MSG_DISABLE_STEPPERS "Ugasi steppere"
#define MSG_AUTO_HOME "Automatski homing"
#define MSG_AUTO_HOME_X "Home-aj X"
#define MSG_AUTO_HOME_Y "Home-aj Y"
#define MSG_AUTO_HOME_Z "Home-aj Z"
#define MSG_LEVEL_BED_HOMING "Home-aj XYZ"
#define MSG_LEVEL_BED_WAITING "Klikni za početak"
#define MSG_LEVEL_BED_NEXT_POINT "Sljedeća točka"
#define MSG_LEVEL_BED_DONE "Niveliranje gotovo!"
#define MSG_LEVEL_BED_CANCEL "Otkaži"
#define MSG_SET_HOME_OFFSETS "Postavi home offsete"
#define MSG_HOME_OFFSETS_APPLIED "Offsets postavljeni"
#define MSG_SET_ORIGIN "Postavi ishodište"
#define MSG_PREHEAT_1 "Predgrij PLA"
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " Sve"
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed"
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf"
#define MSG_PREHEAT_2 "Predgrij ABS"
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " Sve"
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed"
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf"
#define MSG_COOLDOWN "Hlađenje"
#define MSG_SWITCH_PS_ON "Uključi napajanje"
#define MSG_SWITCH_PS_OFF "Isključi napajanje"
#define MSG_EXTRUDE "Extrude"
#define MSG_RETRACT "Retract"
#define MSG_MOVE_AXIS "Miči os"
#define MSG_LEVEL_BED "Niveliraj bed"
#define MSG_MOVE_X "Miči X"
#define MSG_MOVE_Y "Miči Y"
#define MSG_MOVE_Z "Miči Z"
#define MSG_MOVE_E "Extruder"
#define MSG_MOVE_01MM "Miči 0.1mm"
#define MSG_MOVE_1MM "Miči 1mm"
#define MSG_MOVE_10MM "Miči 10mm"
#define MSG_SPEED "Brzina"
#define MSG_BED_Z "Bed Z"
#define MSG_NOZZLE "Dizna"
#define MSG_BED "Bed"
#define MSG_FAN_SPEED "Brzina ventilatora"
#define MSG_FLOW "Flow"
#define MSG_CONTROL "Control"
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact"
#define MSG_AUTOTEMP "Autotemp"
#define MSG_ON "On "
#define MSG_OFF "Off"
#define MSG_PID_P "PID-P"
#define MSG_PID_I "PID-I"
#define MSG_PID_D "PID-D"
#define MSG_PID_C "PID-C"
#define MSG_ACC "Accel"
#define MSG_VX_JERK "Vx-jerk"
#define MSG_VY_JERK "Vy-jerk"
#define MSG_VZ_JERK "Vz-jerk"
#define MSG_VE_JERK "Ve-jerk"
#define MSG_VMAX "Vmax "
#define MSG_VMIN "Vmin"
#define MSG_VTRAV_MIN "VTrav min"
#define MSG_AMAX "Amax "
#define MSG_A_RETRACT "A-retract"
#define MSG_A_TRAVEL "A-travel"
#define MSG_XSTEPS "Xsteps/mm"
#define MSG_YSTEPS "Ysteps/mm"
#define MSG_ZSTEPS "Zsteps/mm"
#define MSG_ESTEPS "Esteps/mm"
#define MSG_TEMPERATURE "Temperature"
#define MSG_MOTION "Gibanje"
#define MSG_VOLUMETRIC "Filament"
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
#define MSG_FILAMENT_DIAM "Fil. Dia."
#define MSG_CONTRAST "Kontrast LCD-a"
#define MSG_STORE_EPROM "Pohrani u memoriju"
#define MSG_LOAD_EPROM "Učitaj memoriju"
#define MSG_RESTORE_FAILSAFE "Učitaj failsafe"
#define MSG_REFRESH "Osvježi"
#define MSG_WATCH "Info screen"
#define MSG_PREPARE "Pripremi"
#define MSG_TUNE "Tune"
#define MSG_PAUSE_PRINT "Pauziraj print"
#define MSG_RESUME_PRINT "Nastavi print"
#define MSG_STOP_PRINT "Zaustavi print"
#define MSG_CARD_MENU "Printaj s SD kartice"
#define MSG_NO_CARD "Nema SD kartice"
#define MSG_DWELL "Sleep..."
#define MSG_USERWAIT "Čekaj korisnika..."
#define MSG_RESUMING "Nastavljam print"
#define MSG_PRINT_ABORTED "Print otkazan"
#define MSG_NO_MOVE "No move."
#define MSG_KILLED "KILLED. "
#define MSG_STOPPED "ZAUSTAVLJEN. "
#define MSG_CONTROL_RETRACT "Retract mm"
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
#define MSG_CONTROL_RETRACTF "Retract V"
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#define MSG_AUTORETRACT "AutoRetr."
#define MSG_FILAMENTCHANGE "Promijeni filament"
#define MSG_INIT_SDCARD "Init. SD karticu"
#define MSG_CNG_SDCARD "Promijeni SD karticu"
#define MSG_ZPROBE_OUT "Z probe out. bed"
#define MSG_BLTOUCH_SELFTEST "BLTouch Self-Test"
#define MSG_BLTOUCH_RESET "Reset BLTouch"
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#define MSG_FIRST "first"
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#define MSG_BABYSTEP_X "Babystep X"
#define MSG_BABYSTEP_Y "Babystep Y"
#define MSG_BABYSTEP_Z "Babystep Z"
#define MSG_ENDSTOP_ABORT "Endstop abort"
#define MSG_HEATING_FAILED_LCD "Grijanje neuspješno"
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP"
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
#define MSG_ERR_Z_HOMING "G28 Z Forbidden"
#define MSG_HALTED "PRINTER HALTED"
#define MSG_PLEASE_RESET "Please reset"
#define MSG_SHORT_DAY "d" // One character only
#define MSG_SHORT_HOUR "h" // One character only
#define MSG_SHORT_MINUTE "m" // One character only
#define MSG_HEATING "Grijanje..."
#define MSG_HEATING_COMPLETE "Grijanje gotovo."
#define MSG_BED_HEATING "Grijanje Bed-a."
#define MSG_BED_DONE "Bed gotov."
#define MSG_DELTA_CALIBRATE "Delta Kalibracija"
#define MSG_DELTA_CALIBRATE_X "Kalibriraj X"
#define MSG_DELTA_CALIBRATE_Y "Kalibriraj Y"
#define MSG_DELTA_CALIBRATE_Z "Kalibriraj Z"
#define MSG_DELTA_CALIBRATE_CENTER "Kalibriraj Središte"
#define MSG_INFO_MENU "O printeru"
#define MSG_INFO_PRINTER_MENU "Podaci o printeru"
#define MSG_INFO_STATS_MENU "Statistika printera"
#define MSG_INFO_BOARD_MENU "Podaci o elektronici"
#define MSG_INFO_THERMISTOR_MENU "Termistori"
#define MSG_INFO_EXTRUDERS "Extruderi"
#define MSG_INFO_BAUDRATE "Baud"
#define MSG_INFO_PROTOCOL "Protokol"
#define MSG_LIGHTS_ON "Upali osvjetljenje"
#define MSG_LIGHTS_OFF "Ugasi osvjetljenje"
#if LCD_WIDTH >= 20
#define MSG_INFO_PRINT_COUNT "Broj printova"
#define MSG_INFO_COMPLETED_PRINTS "Završeni"
#define MSG_INFO_PRINT_TIME "Ukupno vrijeme printanja"
#define MSG_INFO_PRINT_LONGEST "Trajanje najdužeg printa"
#define MSG_INFO_PRINT_FILAMENT "Extrudirano ukupno"
#else
#define MSG_INFO_PRINT_COUNT "Printovi"
#define MSG_INFO_COMPLETED_PRINTS "Završeni"
#define MSG_INFO_PRINT_TIME "Ukupno"
#define MSG_INFO_PRINT_LONGEST "Najduži"
#define MSG_INFO_PRINT_FILAMENT "Extrudirano"
#endif
#define MSG_INFO_MIN_TEMP "Min Temp"
#define MSG_INFO_MAX_TEMP "Max Temp"
#define MSG_INFO_PSU "Napajanje"
#define MSG_DRIVE_STRENGTH "Drive Strength"
#define MSG_DAC_PERCENT "Driver %"
#define MSG_DAC_EEPROM_WRITE "DAC EEPROM Write"
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT"
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:"
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrudiraj više"
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Nastavi print"
#if LCD_HEIGHT >= 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Čekaj početak"
#define MSG_FILAMENT_CHANGE_INIT_2 "filamenta"
#define MSG_FILAMENT_CHANGE_INIT_3 "promijeni"
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Čekaj"
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload"
#define MSG_FILAMENT_CHANGE_INSERT_1 "Umetni filament"
#define MSG_FILAMENT_CHANGE_INSERT_2 "i pritisni tipku"
#define MSG_FILAMENT_CHANGE_INSERT_3 "za nastavak..."
#define MSG_FILAMENT_CHANGE_LOAD_1 "Pričekaj"
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament load"
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Pričekaj"
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude"
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print"
#define MSG_FILAMENT_CHANGE_RESUME_2 "to resume"
#else // LCD_HEIGHT < 4
#define MSG_FILAMENT_CHANGE_INIT_1 "Pričekaj..."
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..."
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click"
#define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..."
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extrudiranje..."
#define MSG_FILAMENT_CHANGE_RESUME_1 "Nastavljam..."
#endif
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_HR_H