243 lines
13 KiB
C
243 lines
13 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Galician language (ISO "gl")
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_GL_H
|
|
#define LANGUAGE_GL_H
|
|
|
|
#define MAPPER_C2C3
|
|
#define DISPLAY_CHARSET_ISO10646_1
|
|
|
|
#define WELCOME_MSG MACHINE_NAME " lista."
|
|
#define MSG_SD_INSERTED "Tarxeta inserida"
|
|
#define MSG_SD_REMOVED "Tarxeta retirada"
|
|
#define MSG_LCD_ENDSTOPS "FinCarro"
|
|
#define MSG_MAIN "Menu principal"
|
|
#define MSG_AUTOSTART "Autoarranque"
|
|
#define MSG_DISABLE_STEPPERS "Apagar motores"
|
|
#define MSG_AUTO_HOME "Ir a orixe"
|
|
#define MSG_AUTO_HOME_X "Ir orixe X"
|
|
#define MSG_AUTO_HOME_Y "Ir orixe Y"
|
|
#define MSG_AUTO_HOME_Z "Ir orixe Z"
|
|
#define MSG_LEVEL_BED_HOMING "Ir orixes XYZ"
|
|
#define MSG_LEVEL_BED_WAITING "Prema pulsador"
|
|
#define MSG_LEVEL_BED_NEXT_POINT "Seguinte punto"
|
|
#define MSG_LEVEL_BED_DONE "Nivelado feito"
|
|
#define MSG_LEVEL_BED_CANCEL "Cancelar"
|
|
#define MSG_SET_HOME_OFFSETS "Offsets na orixe"
|
|
#define MSG_HOME_OFFSETS_APPLIED "Offsets fixados"
|
|
#define MSG_SET_ORIGIN "Fixar orixe"
|
|
#define MSG_PREHEAT_1 "Prequentar PLA"
|
|
#define MSG_PREHEAT_1_N "Prequentar PLA "
|
|
#define MSG_PREHEAT_1_ALL "Preque. PLA Todo"
|
|
#define MSG_PREHEAT_1_BEDONLY "Preque. PLA Cama"
|
|
#define MSG_PREHEAT_1_SETTINGS "Preque. PLA conf"
|
|
#define MSG_PREHEAT_2 "Prequentar ABS"
|
|
#define MSG_PREHEAT_2_N "Prequentar ABS "
|
|
#define MSG_PREHEAT_2_ALL "Preque. ABS Todo"
|
|
#define MSG_PREHEAT_2_BEDONLY "Preque. ABS Cama"
|
|
#define MSG_PREHEAT_2_SETTINGS "Preque. ABS conf"
|
|
#define MSG_COOLDOWN "Arrefriar"
|
|
#define MSG_SWITCH_PS_ON "Acender"
|
|
#define MSG_SWITCH_PS_OFF "Apagar"
|
|
#define MSG_EXTRUDE "Extrudir"
|
|
#define MSG_RETRACT "Retraer"
|
|
#define MSG_MOVE_AXIS "Mover eixe"
|
|
#define MSG_LEVEL_BED "Nivelar cama"
|
|
#define MSG_MOVE_X "Mover X"
|
|
#define MSG_MOVE_Y "Mover Y"
|
|
#define MSG_MOVE_Z "Mover Z"
|
|
#define MSG_MOVE_E "Extrusor"
|
|
#define MSG_MOVE_01MM "Mover 0.1mm"
|
|
#define MSG_MOVE_1MM "Mover 1mm"
|
|
#define MSG_MOVE_10MM "Mover 10mm"
|
|
#define MSG_SPEED "Velocidade"
|
|
#define MSG_BED_Z "Cama Z"
|
|
#define MSG_NOZZLE "Bico"
|
|
#define MSG_BED "Cama"
|
|
#define MSG_FAN_SPEED "Velocidade vent."
|
|
#define MSG_FLOW "Fluxo"
|
|
#define MSG_CONTROL "Control"
|
|
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
|
|
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
|
|
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact"
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#define MSG_ON "On "
|
|
#define MSG_OFF "Off"
|
|
#define MSG_PID_P "PID-P"
|
|
#define MSG_PID_I "PID-I"
|
|
#define MSG_PID_D "PID-D"
|
|
#define MSG_PID_C "PID-C"
|
|
#define MSG_SELECT "Escolla"
|
|
#define MSG_ACC "Acel"
|
|
#define MSG_VX_JERK "Vx-jerk"
|
|
#define MSG_VY_JERK "Vy-jerk"
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#define MSG_VMAX "Vmax "
|
|
#define MSG_VMIN "Vmin"
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#define MSG_AMAX "Amax "
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#define MSG_A_TRAVEL "A-travel"
|
|
#define MSG_XSTEPS "Xpasos/mm"
|
|
#define MSG_YSTEPS "Ypasos/mm"
|
|
#define MSG_ZSTEPS "Zpasos/mm"
|
|
#define MSG_ESTEPS "Epasos/mm"
|
|
#define MSG_TEMPERATURE "Temperatura"
|
|
#define MSG_MOTION "Movemento"
|
|
#define MSG_VOLUMETRIC "Filamento"
|
|
#define MSG_VOLUMETRIC_ENABLED "E en mm3"
|
|
#define MSG_FILAMENT_DIAM "Diam. fil."
|
|
#define MSG_CONTRAST "Constraste LCD"
|
|
#define MSG_STORE_EPROM "Gardar en memo."
|
|
#define MSG_LOAD_EPROM "Cargar de memo."
|
|
#define MSG_RESTORE_FAILSAFE "Cargar de firm."
|
|
#define MSG_REFRESH "Volver a cargar"
|
|
#define MSG_WATCH "Monitorizacion"
|
|
#define MSG_PREPARE "Preparar"
|
|
#define MSG_TUNE "Axustar"
|
|
#define MSG_PAUSE_PRINT "Pausar impres."
|
|
#define MSG_RESUME_PRINT "Seguir impres."
|
|
#define MSG_STOP_PRINT "Deter impres."
|
|
#define MSG_CARD_MENU "Tarxeta SD"
|
|
#define MSG_NO_CARD "Sen tarxeta SD"
|
|
#define MSG_DWELL "En repouso..."
|
|
#define MSG_USERWAIT "A espera..."
|
|
#define MSG_RESUMING "Imprimindo..."
|
|
#define MSG_PRINT_ABORTED "Impre. cancelada"
|
|
#define MSG_NO_MOVE "Sen movemento."
|
|
#define MSG_KILLED "PROGRAMA MORTO"
|
|
#define MSG_STOPPED "PROGRAMA PARADO"
|
|
#define MSG_CONTROL_RETRACT "Retraccion mm"
|
|
#define MSG_CONTROL_RETRACT_SWAP "Cambio retra. mm"
|
|
#define MSG_CONTROL_RETRACTF "Retraccion V"
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Alzar Z mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER "Recup. retra. mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "Cambio recup. mm"
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "Recuperacion V"
|
|
#define MSG_AUTORETRACT "Retraccion auto."
|
|
#define MSG_FILAMENTCHANGE "Cambiar filamen."
|
|
#define MSG_INIT_SDCARD "Iniciando SD"
|
|
#define MSG_CNG_SDCARD "Cambiar SD"
|
|
#define MSG_ZPROBE_OUT "Sonda-Z sen cama"
|
|
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#define MSG_BLTOUCH_SELFTEST "Comprobar BLTouch"
|
|
#define MSG_BLTOUCH_RESET "Iniciar BLTouch"
|
|
#define MSG_FIRST "first"
|
|
#define MSG_ZPROBE_ZOFFSET "Offset Z"
|
|
#define MSG_BABYSTEP_X "Micropaso X"
|
|
#define MSG_BABYSTEP_Y "Micropaso Y"
|
|
#define MSG_BABYSTEP_Z "Micropaso Z"
|
|
#define MSG_ENDSTOP_ABORT "Erro fin carro"
|
|
#define MSG_HEATING_FAILED_LCD "Fallo quentando"
|
|
#define MSG_ERR_REDUNDANT_TEMP "Erro temperatura"
|
|
#define MSG_THERMAL_RUNAWAY "Temp. excesiva"
|
|
#define MSG_ERR_MAXTEMP "Err: temp. max."
|
|
#define MSG_ERR_MINTEMP "Err: temp. min."
|
|
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
|
|
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
|
|
#define MSG_ERR_Z_HOMING "G28 Z impedido"
|
|
#define MSG_HALTED "SISTEMA MORTO"
|
|
#define MSG_PLEASE_RESET "Debe reiniciar!"
|
|
#define MSG_SHORT_DAY "d" // One character only
|
|
#define MSG_SHORT_HOUR "h" // One character only
|
|
#define MSG_SHORT_MINUTE "m" // One character only
|
|
#define MSG_HEATING "Quentando..."
|
|
#define MSG_HEATING_COMPLETE "Xa esta quente"
|
|
#define MSG_BED_HEATING "Quentando cama"
|
|
#define MSG_BED_DONE "Cama esta quente"
|
|
#define MSG_DELTA_CALIBRATE "Calibracion Delta"
|
|
#define MSG_DELTA_CALIBRATE_X "Calibrar X"
|
|
#define MSG_DELTA_CALIBRATE_Y "Calibrar Y"
|
|
#define MSG_DELTA_CALIBRATE_Z "Calibrar Z"
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Calibrar Centro"
|
|
#define MSG_INFO_MENU "Acerca de..."
|
|
#define MSG_INFO_PRINTER_MENU "Informacion"
|
|
#define MSG_INFO_STATS_MENU "Estadisticas"
|
|
#define MSG_INFO_BOARD_MENU "Placa nai"
|
|
#define MSG_INFO_THERMISTOR_MENU "Termistores"
|
|
#define MSG_INFO_EXTRUDERS "Extrusores"
|
|
#define MSG_INFO_BAUDRATE "Baudios"
|
|
#define MSG_INFO_PROTOCOL "Protocolo"
|
|
#define MSG_LIGHTS_ON "Acender a luz"
|
|
#define MSG_LIGHTS_OFF "Apagar a luz"
|
|
#if LCD_WIDTH >= 20
|
|
#define MSG_INFO_PRINT_COUNT "Total traballos"
|
|
#define MSG_INFO_COMPLETED_PRINTS "Total completos"
|
|
#define MSG_INFO_PRINT_TIME "Tempo impresion"
|
|
#define MSG_INFO_PRINT_LONGEST "Traballo +longo"
|
|
#define MSG_INFO_PRINT_FILAMENT "Total extruido"
|
|
#else
|
|
#define MSG_INFO_PRINT_COUNT "Traballos"
|
|
#define MSG_INFO_COMPLETED_PRINTS "Completos"
|
|
#define MSG_INFO_PRINT_TIME "Tempo"
|
|
#define MSG_INFO_PRINT_LONGEST "O +longo"
|
|
#define MSG_INFO_PRINT_FILAMENT "Extruido"
|
|
#endif
|
|
#define MSG_INFO_MIN_TEMP "Min Temp"
|
|
#define MSG_INFO_MAX_TEMP "Max Temp"
|
|
#define MSG_INFO_PSU "Fonte alime."
|
|
#define MSG_DRIVE_STRENGTH "Potencia motor"
|
|
#define MSG_DAC_PERCENT "Motor %"
|
|
#define MSG_DAC_EEPROM_WRITE "Garda DAC EEPROM"
|
|
#define MSG_FILAMENT_CHANGE_HEADER "TROCO FILAMENTO"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "OPCIONS TROCO:"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extruir mais"
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Segue traballo"
|
|
#if LCD_HEIGHT >= 4
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Agarde para"
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 "iniciar troco"
|
|
#define MSG_FILAMENT_CHANGE_INIT_3 "de filamento"
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Agarde pola"
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "descarga do"
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_3 "filamento"
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Introduza o"
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 "filamento e"
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 "faga click"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Agarde pola"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 "carga do"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_3 "filamento"
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Agarde pola"
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "extrusion do"
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 "filamento"
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Agarde para"
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 "seguir co"
|
|
#define MSG_FILAMENT_CHANGE_RESUME_3 "traballo"
|
|
#else // LCD_HEIGHT < 4
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Agarde..."
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Descargando..."
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Introduza e click"
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Cargando..."
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruindo..."
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Seguindo..."
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#endif // LANGUAGE_GL_H
|
|
|