Marlin_Firmware/buildroot/share/tests/DUE-tests
2019-09-23 19:16:40 -05:00

59 lines
2.3 KiB
Bash
Executable File

#!/usr/bin/env bash
#
# Build tests for DUE (Atmel SAM3X8E ARM Cortex-M3)
#
# exit on first failure
set -e
backup_ramps # pins_set is used below...
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EFB
opt_set TEMP_SENSOR_0 -2
opt_set TEMP_SENSOR_BED 2
opt_set GRID_MAX_POINTS_X 16
opt_set FANMUX0_PIN 53
opt_enable S_CURVE_ACCELERATION EEPROM_SETTINGS GCODE_MACROS \
PIDTEMPBED FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING \
EEPROM_SETTINGS SDSUPPORT BINARY_FILE_TRANSFER \
BLINKM PCA9632 RGB_LED RGB_LED_R_PIN RGB_LED_G_PIN RGB_LED_B_PIN LED_CONTROL_MENU \
NEOPIXEL_LED CASE_LIGHT_ENABLE CASE_LIGHT_USE_NEOPIXEL CASE_LIGHT_MENU \
NOZZLE_PARK_FEATURE ADVANCED_PAUSE_FEATURE FILAMENT_RUNOUT_DISTANCE_MM FILAMENT_RUNOUT_SENSOR \
AUTO_BED_LEVELING_BILINEAR Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
SKEW_CORRECTION SKEW_CORRECTION_FOR_Z SKEW_CORRECTION_GCODE CALIBRATION_GCODE \
BACKLASH_COMPENSATION BACKLASH_GCODE BAUD_RATE_GCODE BEZIER_CURVE_SUPPORT \
FWRETRACT ARC_P_CIRCLES CNC_WORKSPACE_PLANES CNC_COORDINATE_SYSTEMS \
PSU_CONTROL AUTO_POWER_CONTROL \
SLOW_PWM_HEATERS THERMAL_PROTECTION_CHAMBER \
PINS_DEBUGGING MAX7219_DEBUG M114_DETAIL \
EXTENSIBLE_UI
opt_add EXTUI_EXAMPLE
opt_set E0_AUTO_FAN_PIN 8
opt_set EXTRUDER_AUTO_FAN_SPEED 100
opt_set TEMP_SENSOR_CHAMBER 3
opt_set HEATER_CHAMBER_PIN 45
exec_test $1 $2 "RAMPS4DUE_EFB with ABL (Bilinear), EXTENSIBLE_UI, S-Curve, many options."
restore_configs
opt_set MOTHERBOARD BOARD_RADDS
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG BLTOUCH AUTO_BED_LEVELING_BILINEAR \
Z_TRIPLE_STEPPER_DRIVERS Z_TRIPLE_ENDSTOPS Z_STEPPER_AUTO_ALIGN ENDSTOPPULLUPS
opt_add Z2_MAX_ENDSTOP_INVERTING false
opt_add Z3_MAX_ENDSTOP_INVERTING false
pins_set ramps/RAMPS X_MAX_PIN -1
pins_set ramps/RAMPS Y_MAX_PIN -1
opt_add Z2_MAX_PIN 2
opt_add Z3_MAX_PIN 3
exec_test $1 $2 "RADDS with ABL (Bilinear), Z_TRIPLE_STEPPER_DRIVERS and Z_STEPPER_AUTO_ALIGN"
#
# Test SWITCHING_EXTRUDER
#
restore_configs
opt_set MOTHERBOARD BOARD_RAMPS4DUE_EEF
opt_set EXTRUDERS 2
opt_set NUM_SERVOS 1
opt_enable SWITCHING_EXTRUDER ULTIMAKERCONTROLLER BEEP_ON_FEEDRATE_CHANGE POWER_LOSS_RECOVERY
exec_test $1 $2 "RAMPS4DUE_EEF with SWITCHING_EXTRUDER, POWER_LOSS_RECOVERY"