3f15b7c7b8
Run avr-size with the --mcu=... -C option as well. That reports how much actual device program and data memory is used along with a percentage fullness. Signed-off-by: Ian Jackson <ijackson@chiark.greenend.org.uk>
299 lines
8.9 KiB
Makefile
299 lines
8.9 KiB
Makefile
# Sprinter Arduino Project Makefile
|
|
#
|
|
# Makefile Based on:
|
|
# Arduino 0011 Makefile
|
|
# Arduino adaptation by mellis, eighthave, oli.keller
|
|
#
|
|
# This has been tested with Arduino 0022.
|
|
#
|
|
# This makefile allows you to build sketches from the command line
|
|
# without the Arduino environment (or Java).
|
|
#
|
|
# Detailed instructions for using the makefile:
|
|
#
|
|
# 1. Modify the line containg "INSTALL_DIR" to point to the directory that
|
|
# contains the Arduino installation (for example, under Mac OS X, this
|
|
# might be /Applications/arduino-0012).
|
|
#
|
|
# 2. Modify the line containing "PORT" to refer to the filename
|
|
# representing the USB or serial connection to your Arduino board
|
|
# (e.g. PORT = /dev/tty.USB0). If the exact name of this file
|
|
# changes, you can use * as a wildcard (e.g. PORT = /dev/tty.usb*).
|
|
#
|
|
# 3. Set the line containing "MCU" to match your board's processor.
|
|
# Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
|
|
# or Diecimila have the atmega168. If you're using a LilyPad Arduino,
|
|
# change F_CPU to 8000000. If you are using Gen7 electronics, you
|
|
# probably need to use 20000000. Either way, you must regenerate
|
|
# the speed lookup table with create_speed_lookuptable.py.
|
|
#
|
|
# 4. Type "make" and press enter to compile/verify your program.
|
|
#
|
|
# 5. Type "make upload", reset your Arduino board, and press enter to
|
|
# upload your program to the Arduino board.
|
|
#
|
|
# $Id$
|
|
|
|
#For "old" Arduino Mega
|
|
#MCU = atmega1280
|
|
#For Arduino Mega2560
|
|
#MCU = atmega2560
|
|
#For Sanguinololu
|
|
MCU = atmega644p
|
|
|
|
# Here you select "arduino", "Sanguino", "Gen7", ...
|
|
HARDWARE_VARIANT = Sanguino
|
|
# This defined the board you are compiling for
|
|
HARDWARE_MOTHERBOARD = 91
|
|
|
|
# Arduino source install directory
|
|
INSTALL_DIR = ../../arduino-0022
|
|
|
|
# Arduino containd the main source code for the Arduino
|
|
# Libraries, the "hardware variant" are for boards
|
|
# that derives from that, and their source are present in
|
|
# the main Marlin source directory
|
|
ARDUINO = $(INSTALL_DIR)/hardware/arduino/cores/arduino
|
|
|
|
ifeq (${HARDWARE_VARIANT}, arduino)
|
|
HARDWARE_SRC= $(ARDUINO)
|
|
else
|
|
HARDWARE_SRC= $(HARDWARE_VARIANT)/cores/arduino
|
|
endif
|
|
|
|
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
|
|
# if you are setting this to something other than 16MHz
|
|
F_CPU = 16000000
|
|
|
|
UPLOAD_RATE = 115200
|
|
AVRDUDE_PROGRAMMER = arduino
|
|
PORT = /dev/arduino
|
|
|
|
TARGET = $(notdir $(CURDIR))
|
|
|
|
# VPATH tells make to look into these directory for source files,
|
|
# there is no need to specify explicit pathnames as long as the
|
|
# directory is added here
|
|
|
|
VPATH = .
|
|
VPATH += applet
|
|
VPATH += $(HARDWARE_SRC)
|
|
VPATH += $(ARDUINO)
|
|
VPATH += $(INSTALL_DIR)/libraries/LiquidCrystal
|
|
|
|
############################################################################
|
|
# Below here nothing should be changed...
|
|
|
|
AVR_TOOLS_PATH =
|
|
SRC = pins_arduino.c wiring.c \
|
|
wiring_analog.c wiring_digital.c \
|
|
wiring_pulse.c \
|
|
wiring_shift.c WInterrupts.c
|
|
CXXSRC = WMath.cpp WString.cpp Print.cpp \
|
|
Marlin.cpp MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp \
|
|
SdFatUtil.cpp SdFile.cpp SdVolume.cpp motion_control.cpp \
|
|
planner.cpp stepper.cpp temperature.cpp cardreader.cpp
|
|
#CXXSRC += LiquidCrystal.cpp ultralcd.cpp
|
|
#CXXSRC += ultralcd.cpp
|
|
FORMAT = ihex
|
|
|
|
# Name of this Makefile (used for "make depend").
|
|
MAKEFILE = Makefile
|
|
|
|
# Debugging format.
|
|
# Native formats for AVR-GCC's -g are stabs [default], or dwarf-2.
|
|
# AVR (extended) COFF requires stabs, plus an avr-objcopy run.
|
|
DEBUG = stabs
|
|
|
|
OPT = s
|
|
|
|
# Place -D or -U options here
|
|
CDEFS = -DF_CPU=$(F_CPU)
|
|
CXXDEFS = -DF_CPU=$(F_CPU)
|
|
|
|
# Add all the source directories as include directories too
|
|
CINCS = ${addprefix -I ,${VPATH}}
|
|
CXXINCS = ${addprefix -I ,${VPATH}}
|
|
|
|
# Compiler flag to set the C Standard level.
|
|
# c89 - "ANSI" C
|
|
# gnu89 - c89 plus GCC extensions
|
|
# c99 - ISO C99 standard (not yet fully implemented)
|
|
# gnu99 - c99 plus GCC extensions
|
|
#CSTANDARD = -std=gnu99
|
|
CDEBUG = -g$(DEBUG)
|
|
CWARN = -Wall -Wstrict-prototypes
|
|
CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
|
|
-fshort-enums -w -ffunction-sections -fdata-sections \
|
|
-DARDUINO=22
|
|
ifneq (${HARDWARE_MOTHERBOARD},)
|
|
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
|
|
endif
|
|
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
|
|
|
|
CFLAGS = $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING)
|
|
CXXFLAGS = $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING)
|
|
#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
|
|
LDFLAGS = -lm
|
|
|
|
|
|
# Programming support using avrdude. Settings and variables.
|
|
AVRDUDE_PORT = $(PORT)
|
|
AVRDUDE_WRITE_FLASH = -U flash:w:applet/$(TARGET).hex:i
|
|
AVRDUDE_FLAGS = -D -C $(INSTALL_DIR)/hardware/tools/avrdude.conf \
|
|
-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
|
|
-b $(UPLOAD_RATE)
|
|
|
|
# Program settings
|
|
CC = $(AVR_TOOLS_PATH)avr-gcc
|
|
CXX = $(AVR_TOOLS_PATH)avr-g++
|
|
OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
|
|
OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
|
|
AR = $(AVR_TOOLS_PATH)avr-ar
|
|
SIZE = $(AVR_TOOLS_PATH)avr-size
|
|
NM = $(AVR_TOOLS_PATH)avr-nm
|
|
AVRDUDE = avrdude
|
|
REMOVE = rm -f
|
|
MV = mv -f
|
|
|
|
# Define all object files.
|
|
OBJ = ${patsubst %.c, applet/%.o, ${SRC}}
|
|
OBJ += ${patsubst %.cpp, applet/%.o, ${CXXSRC}}
|
|
OBJ += ${patsubst %.S, applet/%.o, ${ASRC}}
|
|
|
|
# Define all listing files.
|
|
LST = $(ASRC:.S=.lst) $(CXXSRC:.cpp=.lst) $(SRC:.c=.lst)
|
|
|
|
# Combine all necessary flags and optional flags.
|
|
# Add target processor to flags.
|
|
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
|
|
ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS)
|
|
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS)
|
|
|
|
# set V=1 (eg, "make V=1") to print the full commands etc.
|
|
ifneq ($V,1)
|
|
Pecho=@echo
|
|
P=@
|
|
else
|
|
Pecho=@:
|
|
P=
|
|
endif
|
|
|
|
# Default target.
|
|
all: sizeafter
|
|
|
|
build: applet elf hex
|
|
|
|
# Creates the object directory
|
|
applet:
|
|
$P mkdir -p applet
|
|
|
|
# the .cpp for Marlin depends on the .pde
|
|
#applet/$(TARGET).cpp: $(TARGET).pde
|
|
# ..and the .o depends from the .cpp
|
|
#applet/%.o: applet/%.cpp
|
|
|
|
applet/%.cpp: %.pde $(MAKEFILE)
|
|
# Here is the "preprocessing".
|
|
# It creates a .cpp file based with the same name as the .pde file.
|
|
# On top of the new .cpp file comes the WProgram.h header.
|
|
$(Pecho) " WR $@"
|
|
$P echo '#include "WProgram.h"' > $@
|
|
$P echo '#include "$<"' >>$@
|
|
$P echo '#include "$(ARDUINO)/main.cpp"' >> $@
|
|
|
|
elf: applet/$(TARGET).elf
|
|
hex: applet/$(TARGET).hex
|
|
eep: applet/$(TARGET).eep
|
|
lss: applet/$(TARGET).lss
|
|
sym: applet/$(TARGET).sym
|
|
|
|
# Program the device.
|
|
# Do not try to reset an arduino if it's not one
|
|
upload: applet/$(TARGET).hex
|
|
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
|
stty hup < $(PORT); true
|
|
endif
|
|
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH)
|
|
ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
|
stty -hup < $(PORT); true
|
|
endif
|
|
|
|
# Display size of file.
|
|
HEXSIZE = $(SIZE) --target=$(FORMAT) applet/$(TARGET).hex
|
|
ELFSIZE = $(SIZE) --mcu=$(MCU) -C applet/$(TARGET).elf; \
|
|
$(SIZE) applet/$(TARGET).elf
|
|
sizebefore:
|
|
$P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
|
|
|
|
sizeafter: build
|
|
$P if [ -f applet/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); echo; fi
|
|
|
|
|
|
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
|
COFFCONVERT=$(OBJCOPY) --debugging \
|
|
--change-section-address .data-0x800000 \
|
|
--change-section-address .bss-0x800000 \
|
|
--change-section-address .noinit-0x800000 \
|
|
--change-section-address .eeprom-0x810000
|
|
|
|
|
|
coff: applet/$(TARGET).elf
|
|
$(COFFCONVERT) -O coff-avr applet/$(TARGET).elf $(TARGET).cof
|
|
|
|
|
|
extcoff: $(TARGET).elf
|
|
$(COFFCONVERT) -O coff-ext-avr applet/$(TARGET).elf $(TARGET).cof
|
|
|
|
|
|
.SUFFIXES: .elf .hex .eep .lss .sym
|
|
.PRECIOUS: .o
|
|
|
|
.elf.hex:
|
|
$(Pecho) " COPY $@"
|
|
$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
|
|
|
.elf.eep:
|
|
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
|
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
|
|
|
# Create extended listing file from ELF output file.
|
|
.elf.lss:
|
|
$(OBJDUMP) -h -S $< > $@
|
|
|
|
# Create a symbol table from ELF output file.
|
|
.elf.sym:
|
|
$(NM) -n $< > $@
|
|
|
|
# Link: create ELF output file from library.
|
|
applet/$(TARGET).elf: applet/$(TARGET).cpp applet/core.a Configuration.h
|
|
$(Pecho) " CXX $@"
|
|
$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ applet/$(TARGET).cpp -L. applet/core.a $(LDFLAGS)
|
|
|
|
applet/core.a: $(OBJ)
|
|
$P for i in $(OBJ); do echo " AR $$i"; $(AR) rcs applet/core.a $$i; done
|
|
|
|
applet/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
|
$(Pecho) " CC $@"
|
|
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
|
|
|
|
applet/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
|
$(Pecho) " CXX $@"
|
|
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
|
|
|
|
|
# Target: clean project.
|
|
clean:
|
|
$(Pecho) " RM applet/*"
|
|
$P $(REMOVE) applet/$(TARGET).hex applet/$(TARGET).eep applet/$(TARGET).cof applet/$(TARGET).elf \
|
|
applet/$(TARGET).map applet/$(TARGET).sym applet/$(TARGET).lss applet/$(TARGET).cpp applet/core.a \
|
|
$(OBJ) $(LST) $(SRC:.c=.s) $(SRC:.c=.d) $(CXXSRC:.cpp=.s) $(CXXSRC:.cpp=.d)
|
|
$(Pecho) " RMDIR applet/"
|
|
$P rm -rf applet
|
|
|
|
|
|
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend applet_files sizebefore sizeafter
|
|
|
|
# Automaticaly include the dependency files created by gcc
|
|
-include ${wildcard applet/*.d}
|