Marlin_Firmware

History

Scott Lahteine 49cf92dc36 Extended condition macros (#13419 ) Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add: - Alias `ANY(...)` for `!DISABLED(...)` - Alias `ANY_PIN(...)` for `PIN_EXISTS(a) \|\| PIN_EXISTS(b) ...` - Alias `EITHER(A,B)` for `ANY(...)` - Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)` - `NONE(...)` for `DISABLED(...)`	2019-03-16 23:43:06 -05:00
..
Configuration.h	Extended condition macros (#13419 )	2019-03-16 23:43:06 -05:00
README.txt	Relocate configs above Marlin/src folder (#13299 )	2019-03-03 16:50:56 -06:00

Allow `ENABLED`, `DISABLED`, `PIN_EXISTS`, and `BUTTON_EXISTS` to take multiple arguments. Also add:
- Alias `ANY(...)` for `!DISABLED(...)`
- Alias `ANY_PIN(...)` for `PIN_EXISTS(a) || PIN_EXISTS(b) ...`
- Alias `EITHER(A,B)` for `ANY(...)`
- Alias `ALL(...)` and `BOTH(A,B)` for `ENABLED(...)`
- `NONE(...)` for `DISABLED(...)`

2019-03-16 23:43:06 -05:00

Configuration.h

Extended condition macros (#13419 )

2019-03-16 23:43:06 -05:00

README.txt

Relocate configs above Marlin/src folder (#13299 )

2019-03-03 16:50:56 -06:00

README.txt

This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.

(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)

The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.

The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...

Have fun!
--
tobi