Marlin_Firmware/Marlin/language_en.h
alexborro 9157cbd8f3 Add Travel Acceleration and change the M204 options
Added option to set Travel Acceleration (non printing moves).
The M204 options was a non sense (S for printing moves and T for retract
moves).

It has been changed to:
P = Printing moves
R = Retract only (no X, Y, Z) moves
T = Travel (non
printing) moves

I will add this info o G-Code wiki in reprap.org. I also advise to put
this info in Marlin next version changelog.
2015-03-11 13:19:02 -03:00

427 lines
12 KiB
C

/**
* English
*
* LCD Menu Messages
* Please note these are limited to 17 characters!
*
*/
#ifndef LANGUAGE_EN_H
#define LANGUAGE_EN_H
#ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME " ready."
#endif
#ifndef MSG_SD_INSERTED
#define MSG_SD_INSERTED "Card inserted"
#endif
#ifndef MSG_SD_REMOVED
#define MSG_SD_REMOVED "Card removed"
#endif
#ifndef MSG_MAIN
#define MSG_MAIN "Main"
#endif
#ifndef MSG_AUTOSTART
#define MSG_AUTOSTART "Autostart"
#endif
#ifndef MSG_DISABLE_STEPPERS
#define MSG_DISABLE_STEPPERS "Disable steppers"
#endif
#ifndef MSG_AUTO_HOME
#define MSG_AUTO_HOME "Auto home"
#endif
#ifndef MSG_SET_HOME_OFFSETS
#define MSG_SET_HOME_OFFSETS "Set home offsets"
#endif
#ifndef MSG_SET_ORIGIN
#define MSG_SET_ORIGIN "Set origin"
#endif
#ifndef MSG_PREHEAT_PLA
#define MSG_PREHEAT_PLA "Preheat PLA"
#endif
#ifndef MSG_PREHEAT_PLA_N
#define MSG_PREHEAT_PLA_N MSG_PREHEAT_PLA " "
#endif
#ifndef MSG_PREHEAT_PLA_ALL
#define MSG_PREHEAT_PLA_ALL MSG_PREHEAT_PLA " All"
#endif
#ifndef MSG_PREHEAT_PLA_BEDONLY
#define MSG_PREHEAT_PLA_BEDONLY MSG_PREHEAT_PLA " Bed"
#endif
#ifndef MSG_PREHEAT_PLA_SETTINGS
#define MSG_PREHEAT_PLA_SETTINGS MSG_PREHEAT_PLA " conf"
#endif
#ifndef MSG_PREHEAT_ABS
#define MSG_PREHEAT_ABS "Preheat ABS"
#endif
#ifndef MSG_PREHEAT_ABS_N
#define MSG_PREHEAT_ABS_N MSG_PREHEAT_ABS " "
#endif
#ifndef MSG_PREHEAT_ABS_ALL
#define MSG_PREHEAT_ABS_ALL MSG_PREHEAT_ABS " All"
#endif
#ifndef MSG_PREHEAT_ABS_BEDONLY
#define MSG_PREHEAT_ABS_BEDONLY MSG_PREHEAT_ABS " Bed"
#endif
#ifndef MSG_PREHEAT_ABS_SETTINGS
#define MSG_PREHEAT_ABS_SETTINGS MSG_PREHEAT_ABS " conf"
#endif
#ifndef MSG_H1
#define MSG_H1 "1"
#endif
#ifndef MSG_H2
#define MSG_H2 "2"
#endif
#ifndef MSG_H3
#define MSG_H3 "3"
#endif
#ifndef MSG_H4
#define MSG_H4 "4"
#endif
#ifndef MSG_COOLDOWN
#define MSG_COOLDOWN "Cooldown"
#endif
#ifndef MSG_SWITCH_PS_ON
#define MSG_SWITCH_PS_ON "Switch power on"
#endif
#ifndef MSG_SWITCH_PS_OFF
#define MSG_SWITCH_PS_OFF "Switch power off"
#endif
#ifndef MSG_EXTRUDE
#define MSG_EXTRUDE "Extrude"
#endif
#ifndef MSG_RETRACT
#define MSG_RETRACT "Retract"
#endif
#ifndef MSG_MOVE_AXIS
#define MSG_MOVE_AXIS "Move axis"
#endif
#ifndef MSG_MOVE_X
#define MSG_MOVE_X "Move X"
#endif
#ifndef MSG_MOVE_Y
#define MSG_MOVE_Y "Move Y"
#endif
#ifndef MSG_MOVE_Z
#define MSG_MOVE_Z "Move Z"
#endif
#ifndef MSG_MOVE_E
#define MSG_MOVE_E "Extruder"
#endif
#ifndef MSG_MOVE_01MM
#define MSG_MOVE_01MM "Move 0.1mm"
#endif
#ifndef MSG_MOVE_1MM
#define MSG_MOVE_1MM "Move 1mm"
#endif
#ifndef MSG_MOVE_10MM
#define MSG_MOVE_10MM "Move 10mm"
#endif
#ifndef MSG_SPEED
#define MSG_SPEED "Speed"
#endif
#ifndef MSG_NOZZLE
#define MSG_NOZZLE "Nozzle"
#endif
#ifndef MSG_N2
#define MSG_N2 " 2"
#endif
#ifndef MSG_N3
#define MSG_N3 " 3"
#endif
#ifndef MSG_N4
#define MSG_N4 " 4"
#endif
#ifndef MSG_BED
#define MSG_BED "Bed"
#endif
#ifndef MSG_FAN_SPEED
#define MSG_FAN_SPEED "Fan speed"
#endif
#ifndef MSG_FLOW
#define MSG_FLOW "Flow"
#endif
#ifndef MSG_F0
#define MSG_F0 " 0"
#endif
#ifndef MSG_F1
#define MSG_F1 " 1"
#endif
#ifndef MSG_F2
#define MSG_F2 " 2"
#endif
#ifndef MSG_F3
#define MSG_F3 " 3"
#endif
#ifndef MSG_CONTROL
#define MSG_CONTROL "Control"
#endif
#ifndef MSG_MIN
#define MSG_MIN " " STR_THERMOMETER " Min"
#endif
#ifndef MSG_MAX
#define MSG_MAX " " STR_THERMOMETER " Max"
#endif
#ifndef MSG_FACTOR
#define MSG_FACTOR " " STR_THERMOMETER " Fact"
#endif
#ifndef MSG_AUTOTEMP
#define MSG_AUTOTEMP "Autotemp"
#endif
#ifndef MSG_ON
#define MSG_ON "On "
#endif
#ifndef MSG_OFF
#define MSG_OFF "Off"
#endif
#ifndef MSG_PID_P
#define MSG_PID_P "PID-P"
#endif
#ifndef MSG_PID_I
#define MSG_PID_I "PID-I"
#endif
#ifndef MSG_PID_D
#define MSG_PID_D "PID-D"
#endif
#ifndef MSG_PID_C
#define MSG_PID_C "PID-C"
#endif
#ifndef MSG_E2
#define MSG_E2 " E2"
#endif
#ifndef MSG_E3
#define MSG_E3 " E3"
#endif
#ifndef MSG_E4
#define MSG_E4 " E4"
#endif
#ifndef MSG_ACC
#define MSG_ACC "Accel"
#endif
#ifndef MSG_VXY_JERK
#define MSG_VXY_JERK "Vxy-jerk"
#endif
#ifndef MSG_VZ_JERK
#define MSG_VZ_JERK "Vz-jerk"
#endif
#ifndef MSG_VE_JERK
#define MSG_VE_JERK "Ve-jerk"
#endif
#ifndef MSG_VMAX
#define MSG_VMAX "Vmax "
#endif
#ifndef MSG_X
#define MSG_X "x"
#endif
#ifndef MSG_Y
#define MSG_Y "y"
#endif
#ifndef MSG_Z
#define MSG_Z "z"
#endif
#ifndef MSG_E
#define MSG_E "e"
#endif
#ifndef MSG_VMIN
#define MSG_VMIN "Vmin"
#endif
#ifndef MSG_VTRAV_MIN
#define MSG_VTRAV_MIN "VTrav min"
#endif
#ifndef MSG_AMAX
#define MSG_AMAX "Amax "
#endif
#ifndef MSG_A_RETRACT
#define MSG_A_RETRACT "A-retract"
#endif
#ifndef MSG_A_TRAVEL
#define MSG_A_TRAVEL "A-travel"
#endif
#ifndef MSG_XSTEPS
#define MSG_XSTEPS "Xsteps/mm"
#endif
#ifndef MSG_YSTEPS
#define MSG_YSTEPS "Ysteps/mm"
#endif
#ifndef MSG_ZSTEPS
#define MSG_ZSTEPS "Zsteps/mm"
#endif
#ifndef MSG_ESTEPS
#define MSG_ESTEPS "Esteps/mm"
#endif
#ifndef MSG_TEMPERATURE
#define MSG_TEMPERATURE "Temperature"
#endif
#ifndef MSG_MOTION
#define MSG_MOTION "Motion"
#endif
#ifndef MSG_VOLUMETRIC
#define MSG_VOLUMETRIC "Filament"
#endif
#ifndef MSG_VOLUMETRIC_ENABLED
#define MSG_VOLUMETRIC_ENABLED "E in mm" STR_h3
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_0
#define MSG_FILAMENT_SIZE_EXTRUDER_0 "Fil. Dia. 1"
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_1
#define MSG_FILAMENT_SIZE_EXTRUDER_1 "Fil. Dia. 2"
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_2
#define MSG_FILAMENT_SIZE_EXTRUDER_2 "Fil. Dia. 3"
#endif
#ifndef MSG_FILAMENT_SIZE_EXTRUDER_3
#define MSG_FILAMENT_SIZE_EXTRUDER_3 "Fil. Dia. 4"
#endif
#ifndef MSG_CONTRAST
#define MSG_CONTRAST "LCD contrast"
#endif
#ifndef MSG_STORE_EPROM
#define MSG_STORE_EPROM "Store memory"
#endif
#ifndef MSG_LOAD_EPROM
#define MSG_LOAD_EPROM "Load memory"
#endif
#ifndef MSG_RESTORE_FAILSAFE
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
#endif
#ifndef MSG_REFRESH
#define MSG_REFRESH "Refresh"
#endif
#ifndef MSG_WATCH
#define MSG_WATCH "Info screen"
#endif
#ifndef MSG_PREPARE
#define MSG_PREPARE "Prepare"
#endif
#ifndef MSG_TUNE
#define MSG_TUNE "Tune"
#endif
#ifndef MSG_PAUSE_PRINT
#define MSG_PAUSE_PRINT "Pause print"
#endif
#ifndef MSG_RESUME_PRINT
#define MSG_RESUME_PRINT "Resume print"
#endif
#ifndef MSG_STOP_PRINT
#define MSG_STOP_PRINT "Stop print"
#endif
#ifndef MSG_CARD_MENU
#define MSG_CARD_MENU "Print from SD"
#endif
#ifndef MSG_NO_CARD
#define MSG_NO_CARD "No SD card"
#endif
#ifndef MSG_DWELL
#define MSG_DWELL "Sleep..."
#endif
#ifndef MSG_USERWAIT
#define MSG_USERWAIT "Wait for user..."
#endif
#ifndef MSG_RESUMING
#define MSG_RESUMING "Resuming print"
#endif
#ifndef MSG_PRINT_ABORTED
#define MSG_PRINT_ABORTED "Print aborted"
#endif
#ifndef MSG_NO_MOVE
#define MSG_NO_MOVE "No move."
#endif
#ifndef MSG_KILLED
#define MSG_KILLED "KILLED. "
#endif
#ifndef MSG_STOPPED
#define MSG_STOPPED "STOPPED. "
#endif
#ifndef MSG_CONTROL_RETRACT
#define MSG_CONTROL_RETRACT "Retract mm"
#endif
#ifndef MSG_CONTROL_RETRACT_SWAP
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
#endif
#ifndef MSG_CONTROL_RETRACTF
#define MSG_CONTROL_RETRACTF "Retract V"
#endif
#ifndef MSG_CONTROL_RETRACT_ZLIFT
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
#endif
#ifndef MSG_CONTROL_RETRACT_RECOVER
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
#endif
#ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
#endif
#ifndef MSG_CONTROL_RETRACT_RECOVERF
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
#endif
#ifndef MSG_AUTORETRACT
#define MSG_AUTORETRACT "AutoRetr."
#endif
#ifndef MSG_FILAMENTCHANGE
#define MSG_FILAMENTCHANGE "Change filament"
#endif
#ifndef MSG_INIT_SDCARD
#define MSG_INIT_SDCARD "Init. SD card"
#endif
#ifndef MSG_CNG_SDCARD
#define MSG_CNG_SDCARD "Change SD card"
#endif
#ifndef MSG_ZPROBE_OUT
#define MSG_ZPROBE_OUT "Z probe out. bed"
#endif
#ifndef MSG_POSITION_UNKNOWN
#define MSG_POSITION_UNKNOWN "Home X/Y before Z"
#endif
#ifndef MSG_ZPROBE_ZOFFSET
#define MSG_ZPROBE_ZOFFSET "Z Offset"
#endif
#ifndef MSG_BABYSTEP_X
#define MSG_BABYSTEP_X "Babystep X"
#endif
#ifndef MSG_BABYSTEP_Y
#define MSG_BABYSTEP_Y "Babystep Y"
#endif
#ifndef MSG_BABYSTEP_Z
#define MSG_BABYSTEP_Z "Babystep Z"
#endif
#ifndef MSG_ENDSTOP_ABORT
#define MSG_ENDSTOP_ABORT "Endstop abort"
#endif
#ifndef MSG_HEATING_FAILED_LCD
#define MSG_HEATING_FAILED_LCD "Heating failed"
#endif
#ifndef MSG_ERR_REDUNDANT_TEMP
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP ERROR"
#endif
#ifndef MSG_THERMAL_RUNAWAY
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
#endif
#ifndef MSG_ERR_MAXTEMP
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
#endif
#ifndef MSG_ERR_MINTEMP
#define MSG_ERR_MINTEMP "Err: MINTEMP"
#endif
#ifndef MSG_ERR_MAXTEMP_BED
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
#endif
#ifdef DELTA_CALIBRATION_MENU
#ifndef MSG_DELTA_CALIBRATE
#define MSG_DELTA_CALIBRATE "Delta Calibration"
#endif
#ifndef MSG_DELTA_CALIBRATE_X
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
#endif
#ifndef MSG_DELTA_CALIBRATE_Y
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
#endif
#ifndef MSG_DELTA_CALIBRATE_Z
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
#endif
#ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
#endif
#endif // DELTA_CALIBRATION_MENU
#endif // LANGUAGE_EN_H