Marlin_Firmware/Marlin/language_en.h
Roxy-3D 824f71d503 LCD Panel Interactive Mesh Editing (#7045)
Original Mesh Bed Leveling replacement put at top of UBL Menu Options to
help facilitate the removal of the Original Mesh Bed Leveling.

Radar display (and control) of the UBL Interactive Mesh Editing.
2017-06-12 18:26:49 -05:00

899 lines
30 KiB
C

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* English
*
* LCD Menu Messages
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
*
*/
#ifndef LANGUAGE_EN_H
#define LANGUAGE_EN_H
#ifndef WELCOME_MSG
#define WELCOME_MSG MACHINE_NAME _UxGT(" ready.")
#endif
#ifndef MSG_BACK
#define MSG_BACK _UxGT("Back")
#endif
#ifndef MSG_SD_INSERTED
#define MSG_SD_INSERTED _UxGT("Card inserted")
#endif
#ifndef MSG_SD_REMOVED
#define MSG_SD_REMOVED _UxGT("Card removed")
#endif
#ifndef MSG_LCD_ENDSTOPS
#define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters
#endif
#ifndef MSG_MAIN
#define MSG_MAIN _UxGT("Main")
#endif
#ifndef MSG_AUTOSTART
#define MSG_AUTOSTART _UxGT("Autostart")
#endif
#ifndef MSG_DISABLE_STEPPERS
#define MSG_DISABLE_STEPPERS _UxGT("Disable steppers")
#endif
#ifndef MSG_DEBUG_MENU
#define MSG_DEBUG_MENU _UxGT("Debug Menu")
#endif
#ifndef MSG_PROGRESS_BAR_TEST
#define MSG_PROGRESS_BAR_TEST _UxGT("Progress Bar Test")
#endif
#ifndef MSG_AUTO_HOME
#define MSG_AUTO_HOME _UxGT("Auto home")
#endif
#ifndef MSG_AUTO_HOME_X
#define MSG_AUTO_HOME_X _UxGT("Home X")
#endif
#ifndef MSG_AUTO_HOME_Y
#define MSG_AUTO_HOME_Y _UxGT("Home Y")
#endif
#ifndef MSG_AUTO_HOME_Z
#define MSG_AUTO_HOME_Z _UxGT("Home Z")
#endif
#ifndef MSG_LEVEL_BED_HOMING
#define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ")
#endif
#ifndef MSG_LEVEL_BED_WAITING
#define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin")
#endif
#ifndef MSG_LEVEL_BED_NEXT_POINT
#define MSG_LEVEL_BED_NEXT_POINT _UxGT("Next Point")
#endif
#ifndef MSG_LEVEL_BED_DONE
#define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!")
#endif
#ifndef MSG_Z_FADE_HEIGHT
#define MSG_Z_FADE_HEIGHT _UxGT("Fade Height")
#endif
#ifndef MSG_SET_HOME_OFFSETS
#define MSG_SET_HOME_OFFSETS _UxGT("Set home offsets")
#endif
#ifndef MSG_HOME_OFFSETS_APPLIED
#define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets applied")
#endif
#ifndef MSG_SET_ORIGIN
#define MSG_SET_ORIGIN _UxGT("Set origin")
#endif
#ifndef MSG_PREHEAT_1
#define MSG_PREHEAT_1 _UxGT("Preheat PLA")
#endif
#ifndef MSG_PREHEAT_1_N
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ")
#endif
#ifndef MSG_PREHEAT_1_ALL
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" All")
#endif
#ifndef MSG_PREHEAT_1_END
#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" End")
#endif
#ifndef MSG_PREHEAT_1_BEDONLY
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed")
#endif
#ifndef MSG_PREHEAT_1_SETTINGS
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf")
#endif
#ifndef MSG_PREHEAT_2
#define MSG_PREHEAT_2 _UxGT("Preheat ABS")
#endif
#ifndef MSG_PREHEAT_2_N
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ")
#endif
#ifndef MSG_PREHEAT_2_ALL
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" All")
#endif
#ifndef MSG_PREHEAT_2_END
#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" End")
#endif
#ifndef MSG_PREHEAT_2_BEDONLY
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed")
#endif
#ifndef MSG_PREHEAT_2_SETTINGS
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf")
#endif
#ifndef MSG_COOLDOWN
#define MSG_COOLDOWN _UxGT("Cooldown")
#endif
#ifndef MSG_SWITCH_PS_ON
#define MSG_SWITCH_PS_ON _UxGT("Switch power on")
#endif
#ifndef MSG_SWITCH_PS_OFF
#define MSG_SWITCH_PS_OFF _UxGT("Switch power off")
#endif
#ifndef MSG_EXTRUDE
#define MSG_EXTRUDE _UxGT("Extrude")
#endif
#ifndef MSG_RETRACT
#define MSG_RETRACT _UxGT("Retract")
#endif
#ifndef MSG_MOVE_AXIS
#define MSG_MOVE_AXIS _UxGT("Move axis")
#endif
#ifndef MSG_BED_LEVELING
#define MSG_BED_LEVELING _UxGT("Bed Leveling")
#endif
#ifndef MSG_LEVEL_BED
#define MSG_LEVEL_BED _UxGT("Level bed")
#endif
#ifndef MSG_EDITING_STOPPED
#define MSG_EDITING_STOPPED _UxGT("Mesh Editing Stopped")
#endif
#ifndef MSG_USER_MENU
#define MSG_USER_MENU _UxGT("Custom Commands")
#endif
#ifndef MSG_UBL_DOING_G29
#define MSG_UBL_DOING_G29 _UxGT("Doing G29")
#endif
#ifndef MSG_UBL_UNHOMED
#define MSG_UBL_UNHOMED _UxGT("Home XYZ first")
#endif
#ifndef MSG_UBL_TOOLS
#define MSG_UBL_TOOLS _UxGT("UBL Tools")
#endif
#ifndef MSG_UBL_LEVEL_BED
#define MSG_UBL_LEVEL_BED _UxGT("Unified Bed Leveling")
#endif
#ifndef MSG_UBL_MANUAL_MESH
#define MSG_UBL_MANUAL_MESH _UxGT("Manually Build Mesh")
#endif
#ifndef MSG_UBL_BC_INSERT
#define MSG_UBL_BC_INSERT _UxGT("Place shim & measure")
#endif
#ifndef MSG_UBL_BC_INSERT2
#define MSG_UBL_BC_INSERT2 _UxGT("Measure")
#endif
#ifndef MSG_UBL_BC_REMOVE
#define MSG_UBL_BC_REMOVE _UxGT("Remove & measure bed")
#endif
#ifndef MSG_UBL_MOVING_TO_NEXT
#define MSG_UBL_MOVING_TO_NEXT _UxGT("Moving to next")
#endif
#ifndef MSG_UBL_ACTIVATE_MESH
#define MSG_UBL_ACTIVATE_MESH _UxGT("Activate UBL")
#endif
#ifndef MSG_UBL_DEACTIVATE_MESH
#define MSG_UBL_DEACTIVATE_MESH _UxGT("Deactivate UBL")
#endif
#ifndef MSG_UBL_SET_BED_TEMP
#define MSG_UBL_SET_BED_TEMP _UxGT("Bed Temp")
#endif
#ifndef MSG_UBL_CUSTOM_BED_TEMP
#define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP
#endif
#ifndef MSG_UBL_SET_HOTEND_TEMP
#define MSG_UBL_SET_HOTEND_TEMP _UxGT("Hotend Temp")
#endif
#ifndef MSG_UBL_CUSTOM_HOTEND_TEMP
#define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP
#endif
#ifndef MSG_UBL_EDIT_CUSTOM_MESH
#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Edit Custom Mesh")
#endif
#ifndef MSG_UBL_FINE_TUNE_MESH
#define MSG_UBL_FINE_TUNE_MESH _UxGT("Fine Tuning Mesh")
#endif
#ifndef MSG_UBL_DONE_EDITING_MESH
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Done Editing Mesh")
#endif
#ifndef MSG_UBL_BUILD_CUSTOM_MESH
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Build Custom Mesh")
#endif
#ifndef MSG_UBL_BUILD_MESH_MENU
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Build Mesh")
#endif
#ifndef MSG_UBL_BUILD_PLA_MESH
#define MSG_UBL_BUILD_PLA_MESH _UxGT("Build PLA Mesh")
#endif
#ifndef MSG_UBL_BUILD_ABS_MESH
#define MSG_UBL_BUILD_ABS_MESH _UxGT("Build ABS Mesh")
#endif
#ifndef MSG_UBL_BUILD_COLD_MESH
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Build Cold Mesh")
#endif
#ifndef MSG_UBL_MESH_HEIGHT_ADJUST
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Adjust Mesh Height")
#endif
#ifndef MSG_UBL_MESH_HEIGHT_AMOUNT
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Height Amount")
#endif
#ifndef MSG_UBL_VALIDATE_MESH_MENU
#define MSG_UBL_VALIDATE_MESH_MENU _UxGT("Validate Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_PLA_MESH
#define MSG_UBL_VALIDATE_PLA_MESH _UxGT("Validate PLA Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_ABS_MESH
#define MSG_UBL_VALIDATE_ABS_MESH _UxGT("Validate ABS Mesh")
#endif
#ifndef MSG_UBL_VALIDATE_CUSTOM_MESH
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Validate Custom Mesh")
#endif
#ifndef MSG_UBL_CONTINUE_MESH
#define MSG_UBL_CONTINUE_MESH _UxGT("Continue Bed Mesh")
#endif
#ifndef MSG_UBL_MESH_LEVELING
#define MSG_UBL_MESH_LEVELING _UxGT("Mesh Leveling")
#endif
#ifndef MSG_UBL_3POINT_MESH_LEVELING
#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-Point Leveling")
#endif
#ifndef MSG_UBL_GRID_MESH_LEVELING
#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Grid Mesh Leveling")
#endif
#ifndef MSG_UBL_MESH_LEVEL
#define MSG_UBL_MESH_LEVEL _UxGT("Level Mesh")
#endif
#ifndef MSG_UBL_SIDE_POINTS
#define MSG_UBL_SIDE_POINTS _UxGT("Side Points")
#endif
#ifndef MSG_UBL_MAP_TYPE
#define MSG_UBL_MAP_TYPE _UxGT("Map Type")
#endif
#ifndef MSG_UBL_OUTPUT_MAP
#define MSG_UBL_OUTPUT_MAP _UxGT("Output Mesh Map")
#endif
#ifndef MSG_UBL_OUTPUT_MAP_HOST
#define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Output for Host")
#endif
#ifndef MSG_UBL_OUTPUT_MAP_CSV
#define MSG_UBL_OUTPUT_MAP_CSV _UxGT("Output for CSV")
#endif
#ifndef MSG_UBL_OUTPUT_MAP_BACKUP
#define MSG_UBL_OUTPUT_MAP_BACKUP _UxGT("Off Printer Backup")
#endif
#ifndef MSG_UBL_INFO_UBL
#define MSG_UBL_INFO_UBL _UxGT("Output UBL Info")
#endif
#ifndef MSG_UBL_EDIT_MESH_MENU
#define MSG_UBL_EDIT_MESH_MENU _UxGT("Edit Mesh")
#endif
#ifndef MSG_UBL_FILLIN_AMOUNT
#define MSG_UBL_FILLIN_AMOUNT _UxGT("Fill-in Amount")
#endif
#ifndef MSG_UBL_MANUAL_FILLIN
#define MSG_UBL_MANUAL_FILLIN _UxGT("Manual Fill-in")
#endif
#ifndef MSG_UBL_SMART_FILLIN
#define MSG_UBL_SMART_FILLIN _UxGT("Smart Fill-in")
#endif
#ifndef MSG_UBL_FILLIN_MESH
#define MSG_UBL_FILLIN_MESH _UxGT("Fill-in Mesh")
#endif
#ifndef MSG_UBL_INVALIDATE_ALL
#define MSG_UBL_INVALIDATE_ALL _UxGT("Invalidate All")
#endif
#ifndef MSG_UBL_INVALIDATE_CLOSEST
#define MSG_UBL_INVALIDATE_CLOSEST _UxGT("Invalidate Closest")
#endif
#ifndef MSG_UBL_FINE_TUNE_ALL
#define MSG_UBL_FINE_TUNE_ALL _UxGT("Fine Tune All")
#endif
#ifndef MSG_UBL_FINE_TUNE_CLOSEST
#define MSG_UBL_FINE_TUNE_CLOSEST _UxGT("Fine Tune Closest")
#endif
#ifndef MSG_UBL_STORAGE_MESH_MENU
#define MSG_UBL_STORAGE_MESH_MENU _UxGT("Mesh Storage")
#endif
#ifndef MSG_UBL_STORAGE_SLOT
#define MSG_UBL_STORAGE_SLOT _UxGT("Memory Slot")
#endif
#ifndef MSG_UBL_LOAD_MESH
#define MSG_UBL_LOAD_MESH _UxGT("Load Bed Mesh")
#endif
#ifndef MSG_UBL_SAVE_MESH
#define MSG_UBL_SAVE_MESH _UxGT("Save Bed Mesh")
#endif
#ifndef MSG_UBL_SAVE_ERROR
#define MSG_UBL_SAVE_ERROR _UxGT("Err: UBL Save")
#endif
#ifndef MSG_UBL_RESTORE_ERROR
#define MSG_UBL_RESTORE_ERROR _UxGT("Err: UBL Restore")
#endif
#ifndef MSG_UBL_Z_OFFSET_STOPPED
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Z-Offset Stopped")
#endif
#ifndef MSG_MOVING
#define MSG_MOVING _UxGT("Moving...")
#endif
#ifndef MSG_FREE_XY
#define MSG_FREE_XY _UxGT("Free XY")
#endif
#ifndef MSG_MOVE_X
#define MSG_MOVE_X _UxGT("Move X")
#endif
#ifndef MSG_MOVE_Y
#define MSG_MOVE_Y _UxGT("Move Y")
#endif
#ifndef MSG_MOVE_Z
#define MSG_MOVE_Z _UxGT("Move Z")
#endif
#ifndef MSG_MOVE_E
#define MSG_MOVE_E _UxGT("Extruder")
#endif
#ifndef MSG_MOVE_01MM
#define MSG_MOVE_01MM _UxGT("Move 0.1mm")
#endif
#ifndef MSG_MOVE_1MM
#define MSG_MOVE_1MM _UxGT("Move 1mm")
#endif
#ifndef MSG_MOVE_10MM
#define MSG_MOVE_10MM _UxGT("Move 10mm")
#endif
#ifndef MSG_SPEED
#define MSG_SPEED _UxGT("Speed")
#endif
#ifndef MSG_BED_Z
#define MSG_BED_Z _UxGT("Bed Z")
#endif
#ifndef MSG_NOZZLE
#define MSG_NOZZLE _UxGT("Nozzle")
#endif
#ifndef MSG_BED
#define MSG_BED _UxGT("Bed")
#endif
#ifndef MSG_FAN_SPEED
#define MSG_FAN_SPEED _UxGT("Fan speed")
#endif
#ifndef MSG_FLOW
#define MSG_FLOW _UxGT("Flow")
#endif
#ifndef MSG_CONTROL
#define MSG_CONTROL _UxGT("Control")
#endif
#ifndef MSG_MIN
#define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min")
#endif
#ifndef MSG_MAX
#define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max")
#endif
#ifndef MSG_FACTOR
#define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact")
#endif
#ifndef MSG_AUTOTEMP
#define MSG_AUTOTEMP _UxGT("Autotemp")
#endif
#ifndef MSG_ON
#define MSG_ON _UxGT("On ")
#endif
#ifndef MSG_OFF
#define MSG_OFF _UxGT("Off")
#endif
#ifndef MSG_PID_P
#define MSG_PID_P _UxGT("PID-P")
#endif
#ifndef MSG_PID_I
#define MSG_PID_I _UxGT("PID-I")
#endif
#ifndef MSG_PID_D
#define MSG_PID_D _UxGT("PID-D")
#endif
#ifndef MSG_PID_C
#define MSG_PID_C _UxGT("PID-C")
#endif
#ifndef MSG_SELECT
#define MSG_SELECT _UxGT("Select")
#endif
#ifndef MSG_ACC
#define MSG_ACC _UxGT("Accel")
#endif
#ifndef MSG_JERK
#define MSG_JERK _UxGT("Jerk")
#endif
#ifndef MSG_VX_JERK
#define MSG_VX_JERK _UxGT("Vx-jerk")
#endif
#ifndef MSG_VY_JERK
#define MSG_VY_JERK _UxGT("Vy-jerk")
#endif
#ifndef MSG_VZ_JERK
#define MSG_VZ_JERK _UxGT("Vz-jerk")
#endif
#ifndef MSG_VE_JERK
#define MSG_VE_JERK _UxGT("Ve-jerk")
#endif
#ifndef MSG_VELOCITY
#define MSG_VELOCITY _UxGT("Velocity")
#endif
#ifndef MSG_VMAX
#define MSG_VMAX _UxGT("Vmax ")
#endif
#ifndef MSG_VMIN
#define MSG_VMIN _UxGT("Vmin")
#endif
#ifndef MSG_VTRAV_MIN
#define MSG_VTRAV_MIN _UxGT("VTrav min")
#endif
#ifndef MSG_ACCELERATION
#define MSG_ACCELERATION _UxGT("Acceleration")
#endif
#ifndef MSG_AMAX
#define MSG_AMAX _UxGT("Amax ")
#endif
#ifndef MSG_A_RETRACT
#define MSG_A_RETRACT _UxGT("A-retract")
#endif
#ifndef MSG_A_TRAVEL
#define MSG_A_TRAVEL _UxGT("A-travel")
#endif
#ifndef MSG_STEPS_PER_MM
#define MSG_STEPS_PER_MM _UxGT("Steps/mm")
#endif
#ifndef MSG_XSTEPS
#define MSG_XSTEPS _UxGT("Xsteps/mm")
#endif
#ifndef MSG_YSTEPS
#define MSG_YSTEPS _UxGT("Ysteps/mm")
#endif
#ifndef MSG_ZSTEPS
#define MSG_ZSTEPS _UxGT("Zsteps/mm")
#endif
#ifndef MSG_ESTEPS
#define MSG_ESTEPS _UxGT("Esteps/mm")
#endif
#ifndef MSG_E1STEPS
#define MSG_E1STEPS _UxGT("E1steps/mm")
#endif
#ifndef MSG_E2STEPS
#define MSG_E2STEPS _UxGT("E2steps/mm")
#endif
#ifndef MSG_E3STEPS
#define MSG_E3STEPS _UxGT("E3steps/mm")
#endif
#ifndef MSG_E4STEPS
#define MSG_E4STEPS _UxGT("E4steps/mm")
#endif
#ifndef MSG_E5STEPS
#define MSG_E5STEPS _UxGT("E5steps/mm")
#endif
#ifndef MSG_TEMPERATURE
#define MSG_TEMPERATURE _UxGT("Temperature")
#endif
#ifndef MSG_MOTION
#define MSG_MOTION _UxGT("Motion")
#endif
#ifndef MSG_FILAMENT
#define MSG_FILAMENT _UxGT("Filament")
#endif
#ifndef MSG_VOLUMETRIC_ENABLED
#define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3")
#endif
#ifndef MSG_FILAMENT_DIAM
#define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.")
#endif
#ifndef MSG_ADVANCE_K
#define MSG_ADVANCE_K _UxGT("Advance K")
#endif
#ifndef MSG_CONTRAST
#define MSG_CONTRAST _UxGT("LCD contrast")
#endif
#ifndef MSG_STORE_EEPROM
#define MSG_STORE_EEPROM _UxGT("Store settings")
#endif
#ifndef MSG_LOAD_EEPROM
#define MSG_LOAD_EEPROM _UxGT("Load settings")
#endif
#ifndef MSG_RESTORE_FAILSAFE
#define MSG_RESTORE_FAILSAFE _UxGT("Restore failsafe")
#endif
#ifndef MSG_INIT_EEPROM
#define MSG_INIT_EEPROM _UxGT("Initialize EEPROM")
#endif
#ifndef MSG_REFRESH
#define MSG_REFRESH _UxGT("Refresh")
#endif
#ifndef MSG_WATCH
#define MSG_WATCH _UxGT("Info screen")
#endif
#ifndef MSG_PREPARE
#define MSG_PREPARE _UxGT("Prepare")
#endif
#ifndef MSG_TUNE
#define MSG_TUNE _UxGT("Tune")
#endif
#ifndef MSG_PAUSE_PRINT
#define MSG_PAUSE_PRINT _UxGT("Pause print")
#endif
#ifndef MSG_RESUME_PRINT
#define MSG_RESUME_PRINT _UxGT("Resume print")
#endif
#ifndef MSG_STOP_PRINT
#define MSG_STOP_PRINT _UxGT("Stop print")
#endif
#ifndef MSG_CARD_MENU
#define MSG_CARD_MENU _UxGT("Print from SD")
#endif
#ifndef MSG_NO_CARD
#define MSG_NO_CARD _UxGT("No SD card")
#endif
#ifndef MSG_DWELL
#define MSG_DWELL _UxGT("Sleep...")
#endif
#ifndef MSG_USERWAIT
#define MSG_USERWAIT _UxGT("Click to resume...")
#endif
#ifndef MSG_PRINT_PAUSED
#define MSG_PRINT_PAUSED _UxGT("Print paused")
#endif
#ifndef MSG_RESUMING
#define MSG_RESUMING _UxGT("Resuming print")
#endif
#ifndef MSG_PRINT_ABORTED
#define MSG_PRINT_ABORTED _UxGT("Print aborted")
#endif
#ifndef MSG_NO_MOVE
#define MSG_NO_MOVE _UxGT("No move.")
#endif
#ifndef MSG_KILLED
#define MSG_KILLED _UxGT("KILLED. ")
#endif
#ifndef MSG_STOPPED
#define MSG_STOPPED _UxGT("STOPPED. ")
#endif
#ifndef MSG_CONTROL_RETRACT
#define MSG_CONTROL_RETRACT _UxGT("Retract mm")
#endif
#ifndef MSG_CONTROL_RETRACT_SWAP
#define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm")
#endif
#ifndef MSG_CONTROL_RETRACTF
#define MSG_CONTROL_RETRACTF _UxGT("Retract V")
#endif
#ifndef MSG_CONTROL_RETRACT_ZLIFT
#define MSG_CONTROL_RETRACT_ZLIFT _UxGT("Hop mm")
#endif
#ifndef MSG_CONTROL_RETRACT_RECOVER
#define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm")
#endif
#ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP
#define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm")
#endif
#ifndef MSG_CONTROL_RETRACT_RECOVERF
#define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V")
#endif
#ifndef MSG_AUTORETRACT
#define MSG_AUTORETRACT _UxGT("AutoRetr.")
#endif
#ifndef MSG_FILAMENTCHANGE
#define MSG_FILAMENTCHANGE _UxGT("Change filament")
#endif
#ifndef MSG_INIT_SDCARD
#define MSG_INIT_SDCARD _UxGT("Init. SD card")
#endif
#ifndef MSG_CNG_SDCARD
#define MSG_CNG_SDCARD _UxGT("Change SD card")
#endif
#ifndef MSG_ZPROBE_OUT
#define MSG_ZPROBE_OUT _UxGT("Z probe out. bed")
#endif
#ifndef MSG_BLTOUCH
#define MSG_BLTOUCH _UxGT("BLTouch")
#endif
#ifndef MSG_BLTOUCH_SELFTEST
#define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test")
#endif
#ifndef MSG_BLTOUCH_RESET
#define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch")
#endif
#ifndef MSG_BLTOUCH_DEPLOY
#define MSG_BLTOUCH_DEPLOY _UxGT("Deploy BLTouch")
#endif
#ifndef MSG_BLTOUCH_STOW
#define MSG_BLTOUCH_STOW _UxGT("Stow BLTouch")
#endif
#ifndef MSG_HOME
#define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
#endif
#ifndef MSG_FIRST
#define MSG_FIRST _UxGT("first")
#endif
#ifndef MSG_ZPROBE_ZOFFSET
#define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset")
#endif
#ifndef MSG_BABYSTEP_X
#define MSG_BABYSTEP_X _UxGT("Babystep X")
#endif
#ifndef MSG_BABYSTEP_Y
#define MSG_BABYSTEP_Y _UxGT("Babystep Y")
#endif
#ifndef MSG_BABYSTEP_Z
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#endif
#ifndef MSG_ENDSTOP_ABORT
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#endif
#ifndef MSG_HEATING_FAILED_LCD
#define MSG_HEATING_FAILED_LCD _UxGT("Heating failed")
#endif
#ifndef MSG_ERR_REDUNDANT_TEMP
#define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP")
#endif
#ifndef MSG_THERMAL_RUNAWAY
#define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY")
#endif
#ifndef MSG_ERR_MAXTEMP
#define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP")
#endif
#ifndef MSG_ERR_MINTEMP
#define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP")
#endif
#ifndef MSG_ERR_MAXTEMP_BED
#define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED")
#endif
#ifndef MSG_ERR_MINTEMP_BED
#define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED")
#endif
#ifndef MSG_ERR_Z_HOMING
#define MSG_ERR_Z_HOMING _UxGT("G28 Z Forbidden")
#endif
#ifndef MSG_HALTED
#define MSG_HALTED _UxGT("PRINTER HALTED")
#endif
#ifndef MSG_PLEASE_RESET
#define MSG_PLEASE_RESET _UxGT("Please reset")
#endif
#ifndef MSG_SHORT_DAY
#define MSG_SHORT_DAY _UxGT("d") // One character only
#endif
#ifndef MSG_SHORT_HOUR
#define MSG_SHORT_HOUR _UxGT("h") // One character only
#endif
#ifndef MSG_SHORT_MINUTE
#define MSG_SHORT_MINUTE _UxGT("m") // One character only
#endif
#ifndef MSG_HEATING
#define MSG_HEATING _UxGT("Heating...")
#endif
#ifndef MSG_HEATING_COMPLETE
#define MSG_HEATING_COMPLETE _UxGT("Heating done.")
#endif
#ifndef MSG_BED_HEATING
#define MSG_BED_HEATING _UxGT("Bed Heating.")
#endif
#ifndef MSG_BED_DONE
#define MSG_BED_DONE _UxGT("Bed done.")
#endif
#ifndef MSG_DELTA_CALIBRATE
#define MSG_DELTA_CALIBRATE _UxGT("Delta Calibration")
#endif
#ifndef MSG_DELTA_CALIBRATE_X
#define MSG_DELTA_CALIBRATE_X _UxGT("Calibrate X")
#endif
#ifndef MSG_DELTA_CALIBRATE_Y
#define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrate Y")
#endif
#ifndef MSG_DELTA_CALIBRATE_Z
#define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrate Z")
#endif
#ifndef MSG_DELTA_CALIBRATE_CENTER
#define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrate Center")
#endif
#ifndef MSG_DELTA_AUTO_CALIBRATE
#define MSG_DELTA_AUTO_CALIBRATE _UxGT("Auto Calibration")
#endif
#ifndef MSG_DELTA_HEIGHT_CALIBRATE
#define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Set Delta Height")
#endif
#ifndef MSG_INFO_MENU
#define MSG_INFO_MENU _UxGT("About Printer")
#endif
#ifndef MSG_INFO_PRINTER_MENU
#define MSG_INFO_PRINTER_MENU _UxGT("Printer Info")
#endif
#ifndef MSG_3POINT_LEVELING
#define MSG_3POINT_LEVELING _UxGT("3-Point Leveling")
#endif
#ifndef MSG_LINEAR_LEVELING
#define MSG_LINEAR_LEVELING _UxGT("Linear Leveling")
#endif
#ifndef MSG_BILINEAR_LEVELING
#define MSG_BILINEAR_LEVELING _UxGT("Bilinear Leveling")
#endif
#ifndef MSG_UBL_LEVELING
#define MSG_UBL_LEVELING _UxGT("Unified Bed Leveling")
#endif
#ifndef MSG_MESH_LEVELING
#define MSG_MESH_LEVELING _UxGT("Mesh Leveling")
#endif
#ifndef MSG_INFO_STATS_MENU
#define MSG_INFO_STATS_MENU _UxGT("Printer Stats")
#endif
#ifndef MSG_INFO_BOARD_MENU
#define MSG_INFO_BOARD_MENU _UxGT("Board Info")
#endif
#ifndef MSG_INFO_THERMISTOR_MENU
#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors")
#endif
#ifndef MSG_INFO_EXTRUDERS
#define MSG_INFO_EXTRUDERS _UxGT("Extruders")
#endif
#ifndef MSG_INFO_BAUDRATE
#define MSG_INFO_BAUDRATE _UxGT("Baud")
#endif
#ifndef MSG_INFO_PROTOCOL
#define MSG_INFO_PROTOCOL _UxGT("Protocol")
#endif
#ifndef MSG_CASE_LIGHT
#define MSG_CASE_LIGHT _UxGT("Case light")
#endif
#ifndef MSG_CASE_LIGHT_BRIGHTNESS
#define MSG_CASE_LIGHT_BRIGHTNESS _UxGT("Light BRIGHTNESS")
#endif
#if LCD_WIDTH >= 20
#ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT _UxGT("Print Count")
#endif
#ifndef MSG_INFO_COMPLETED_PRINTS
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#endif
#ifndef MSG_INFO_PRINT_TIME
#define MSG_INFO_PRINT_TIME _UxGT("Total print time")
#endif
#ifndef MSG_INFO_PRINT_LONGEST
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest job time")
#endif
#ifndef MSG_INFO_PRINT_FILAMENT
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded total")
#endif
#else
#ifndef MSG_INFO_PRINT_COUNT
#define MSG_INFO_PRINT_COUNT _UxGT("Prints")
#endif
#ifndef MSG_INFO_COMPLETED_PRINTS
#define MSG_INFO_COMPLETED_PRINTS _UxGT("Completed")
#endif
#ifndef MSG_INFO_PRINT_TIME
#define MSG_INFO_PRINT_TIME _UxGT("Total")
#endif
#ifndef MSG_INFO_PRINT_LONGEST
#define MSG_INFO_PRINT_LONGEST _UxGT("Longest")
#endif
#ifndef MSG_INFO_PRINT_FILAMENT
#define MSG_INFO_PRINT_FILAMENT _UxGT("Extruded")
#endif
#endif
#ifndef MSG_INFO_MIN_TEMP
#define MSG_INFO_MIN_TEMP _UxGT("Min Temp")
#endif
#ifndef MSG_INFO_MAX_TEMP
#define MSG_INFO_MAX_TEMP _UxGT("Max Temp")
#endif
#ifndef MSG_INFO_PSU
#define MSG_INFO_PSU _UxGT("Power Supply")
#endif
#ifndef MSG_DRIVE_STRENGTH
#define MSG_DRIVE_STRENGTH _UxGT("Drive Strength")
#endif
#ifndef MSG_DAC_PERCENT
#define MSG_DAC_PERCENT _UxGT("Driver %")
#endif
#ifndef MSG_DAC_EEPROM_WRITE
#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEADER
#define MSG_FILAMENT_CHANGE_HEADER _UxGT("PRINT PAUSED")
#endif
#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER
#define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("RESUME OPTIONS:")
#endif
#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE _UxGT("Extrude more")
#endif
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
#define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resume print")
#endif
#ifndef MSG_FILAMENT_CHANGE_MINTEMP
#define MSG_FILAMENT_CHANGE_MINTEMP _UxGT("Minimum Temp is ")
#endif
#ifndef MSG_FILAMENT_CHANGE_NOZZLE
#define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Nozzle: ")
#endif
//
// Filament Change screens show up to 3 lines on a 4-line display
// ...or up to 2 lines on a 3-line display
//
#if LCD_HEIGHT >= 4
#ifndef MSG_FILAMENT_CHANGE_INIT_1
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Wait for start")
#define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("of the filament")
#define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("change")
#endif
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload")
#endif
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert filament")
#define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("and press button")
#define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("to continue...")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEAT_1
#define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Press button to")
#define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("heat nozzle.")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating nozzle")
#define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("Please wait...")
#endif
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load")
#endif
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Wait for")
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 _UxGT("filament extrude")
#endif
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print")
#define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume")
#endif
#else // LCD_HEIGHT < 4
#ifndef MSG_FILAMENT_CHANGE_INIT_1
#define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Please wait...")
#endif
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1
#define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...")
#endif
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
#define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click")
#endif
#ifndef MSG_FILAMENT_CHANGE_HEATING_1
#define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...")
#endif
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
#define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...")
#endif
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 _UxGT("Extruding...")
#endif
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
#define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Resuming...")
#endif
#endif // LCD_HEIGHT < 4
#endif // LANGUAGE_EN_H