bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
33a6fc70e4
Marlin_Firmware/Marlin
History
etagle 33a6fc70e4 Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC)
2017-12-21 02:42:46 -03:00
..
lib Module updates 2017-09-21 16:26:42 -05:00
src Adding USB MSD implementation to the HAL: Now, when you plug the Native USB port of the Arduino DUE to your PC, it will be detected as a composite USB device: One of the devices is a USB CDC (Serial port over USB) with native USB handshake (no more overflows!!) (set SERIAL_PORT to -1 to use it as main serial port) and also, a MSD (USB Mass Storage Device) will be detected, and the SD card present on the socket will be reflected as a Removable disk on your PC) 2017-12-21 02:42:46 -03:00
Configuration_adv.h A single setting to validate filament width 2017-12-19 21:33:25 -06:00
Configuration.h [2.0.x] Adding support for using the MKS_12864OLED with the SSD1306 controller (#8814) 2017-12-16 18:47:04 -06:00
Marlin.ino [2.0.x] TMC driver update (#8769) 2017-12-15 15:03:14 -06:00
README.h Add a README.h file for Arduino IDE users 2017-10-11 18:10:15 -05:00

README.h 

/*
================================================================================

  Marlin Firmware

  (c) 2011-2017 MarlinFirmware
  Portions of Marlin are (c) by their respective authors.
  All code complies with GPLv2 and/or GPLv3

================================================================================

Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware.

To configure Marlin you must edit Configuration.h and Configuration_adv.h
located in the root 'Marlin' folder. Check the config/examples folder to see if
there's a more suitable starting-point for your specific hardware.

Before diving in, we recommend the following essential links:

Marlin Firmware Official Website

  - http://marlinfw.org/
    The official Marlin Firmware website contains the most up-to-date
    documentation. Contributions are always welcome!

Configuration

  - https://www.youtube.com/watch?v=3gwWVFtdg-4
    A good 20-minute overview of Marlin configuration by Tom Sanladerer.
    (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
    Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin

  - http://marlinfw.org/docs/configuration/configuration.html
    Marlin's configuration options are explained in more detail here.

Getting Help

  - http://forums.reprap.org/list.php?415
    The Marlin Discussion Forum is a great place to get help from other Marlin
    users who may have experienced similar issues to your own.

  - https://github.com/MarlinFirmware/Marlin/issues
    With a free GitHub account you can provide us with feedback, bug reports,
    and feature requests via the Marlin Issue Queue.

Contributing

  - http://marlinfw.org/docs/development/contributing.html
    If you'd like to contribute to Marlin, read this first!

  - http://marlinfw.org/docs/development/coding_standards.html
    Before submitting code get to know the Coding Standards.
*/