337 lines
10 KiB
C++
337 lines
10 KiB
C++
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* Software SPI functions originally from Arduino Sd2Card Library
|
|
* Copyright (C) 2009 by William Greiman
|
|
*/
|
|
|
|
/**
|
|
* Description: HAL for Arduino Due and compatible (SAM3X8E)
|
|
*
|
|
* For ARDUINO_ARCH_SAM
|
|
*/
|
|
|
|
#ifdef ARDUINO_ARCH_SAM
|
|
|
|
// --------------------------------------------------------------------------
|
|
// Includes
|
|
// --------------------------------------------------------------------------
|
|
|
|
#include "../../../MarlinConfig.h"
|
|
|
|
// --------------------------------------------------------------------------
|
|
// Public Variables
|
|
// --------------------------------------------------------------------------
|
|
|
|
|
|
// --------------------------------------------------------------------------
|
|
// Public functions
|
|
// --------------------------------------------------------------------------
|
|
|
|
#if ENABLED(SOFTWARE_SPI)
|
|
// --------------------------------------------------------------------------
|
|
// software SPI
|
|
// --------------------------------------------------------------------------
|
|
// bitbanging transfer
|
|
// run at ~100KHz (necessary for init)
|
|
static uint8_t spiTransfer(uint8_t b) { // using Mode 0
|
|
for (int bits = 0; bits < 8; bits++) {
|
|
if (b & 0x80) {
|
|
WRITE(MOSI_PIN, HIGH);
|
|
}
|
|
else {
|
|
WRITE(MOSI_PIN, LOW);
|
|
}
|
|
b <<= 1;
|
|
|
|
WRITE(SCK_PIN, HIGH);
|
|
delayMicroseconds(5U);
|
|
|
|
if (READ(MISO_PIN)) {
|
|
b |= 1;
|
|
}
|
|
WRITE(SCK_PIN, LOW);
|
|
delayMicroseconds(5U);
|
|
}
|
|
return b;
|
|
}
|
|
|
|
void spiBegin() {
|
|
SET_OUTPUT(SS_PIN);
|
|
WRITE(SS_PIN, HIGH);
|
|
SET_OUTPUT(SCK_PIN);
|
|
SET_INPUT(MISO_PIN);
|
|
SET_OUTPUT(MOSI_PIN);
|
|
}
|
|
|
|
void spiInit(uint8_t spiRate) {
|
|
UNUSED(spiRate);
|
|
WRITE(SS_PIN, HIGH);
|
|
WRITE(MOSI_PIN, HIGH);
|
|
WRITE(SCK_PIN, LOW);
|
|
}
|
|
|
|
uint8_t spiRec() {
|
|
WRITE(SS_PIN, LOW);
|
|
uint8_t b = spiTransfer(0xff);
|
|
WRITE(SS_PIN, HIGH);
|
|
return b;
|
|
}
|
|
|
|
void spiRead(uint8_t*buf, uint16_t nbyte) {
|
|
if (nbyte == 0) return;
|
|
WRITE(SS_PIN, LOW);
|
|
for (int i = 0; i < nbyte; i++) {
|
|
buf[i] = spiTransfer(0xff);
|
|
}
|
|
WRITE(SS_PIN, HIGH);
|
|
}
|
|
|
|
void spiSend(uint8_t b) {
|
|
WRITE(SS_PIN, LOW);
|
|
uint8_t response = spiTransfer(b);
|
|
UNUSED(response);
|
|
WRITE(SS_PIN, HIGH);
|
|
}
|
|
|
|
static void spiSend(const uint8_t* buf, size_t n) {
|
|
uint8_t response;
|
|
if (n == 0) return;
|
|
WRITE(SS_PIN, LOW);
|
|
for (uint16_t i = 0; i < n; i++) {
|
|
response = spiTransfer(buf[i]);
|
|
}
|
|
UNUSED(response);
|
|
WRITE(SS_PIN, HIGH);
|
|
}
|
|
|
|
void spiSendBlock(uint8_t token, const uint8_t* buf) {
|
|
uint8_t response;
|
|
|
|
WRITE(SS_PIN, LOW);
|
|
response = spiTransfer(token);
|
|
|
|
for (uint16_t i = 0; i < 512; i++) {
|
|
response = spiTransfer(buf[i]);
|
|
}
|
|
UNUSED(response);
|
|
WRITE(SS_PIN, HIGH);
|
|
}
|
|
#else
|
|
// --------------------------------------------------------------------------
|
|
// hardware SPI
|
|
// --------------------------------------------------------------------------
|
|
// 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz
|
|
int spiDueDividors[] = { 10, 21, 42, 84, 168, 255, 255 };
|
|
bool spiInitMaded = false;
|
|
|
|
void spiBegin() {
|
|
if(spiInitMaded == false) {
|
|
// Configure SPI pins
|
|
PIO_Configure(
|
|
g_APinDescription[SCK_PIN].pPort,
|
|
g_APinDescription[SCK_PIN].ulPinType,
|
|
g_APinDescription[SCK_PIN].ulPin,
|
|
g_APinDescription[SCK_PIN].ulPinConfiguration);
|
|
PIO_Configure(
|
|
g_APinDescription[MOSI_PIN].pPort,
|
|
g_APinDescription[MOSI_PIN].ulPinType,
|
|
g_APinDescription[MOSI_PIN].ulPin,
|
|
g_APinDescription[MOSI_PIN].ulPinConfiguration);
|
|
PIO_Configure(
|
|
g_APinDescription[MISO_PIN].pPort,
|
|
g_APinDescription[MISO_PIN].ulPinType,
|
|
g_APinDescription[MISO_PIN].ulPin,
|
|
g_APinDescription[MISO_PIN].ulPinConfiguration);
|
|
|
|
// set master mode, peripheral select, fault detection
|
|
SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS);
|
|
SPI_Enable(SPI0);
|
|
|
|
#if MB(ALLIGATOR)
|
|
SET_OUTPUT(DAC0_SYNC);
|
|
#if EXTRUDERS > 1
|
|
SET_OUTPUT(DAC1_SYNC);
|
|
WRITE(DAC1_SYNC, HIGH);
|
|
#endif
|
|
SET_OUTPUT(SPI_EEPROM1_CS);
|
|
SET_OUTPUT(SPI_EEPROM2_CS);
|
|
SET_OUTPUT(SPI_FLASH_CS);
|
|
WRITE(DAC0_SYNC, HIGH);
|
|
WRITE(SPI_EEPROM1_CS, HIGH );
|
|
WRITE(SPI_EEPROM2_CS, HIGH );
|
|
WRITE(SPI_FLASH_CS, HIGH );
|
|
WRITE(SS_PIN, HIGH );
|
|
#endif // MB(ALLIGATOR)
|
|
|
|
PIO_Configure(
|
|
g_APinDescription[SPI_PIN].pPort,
|
|
g_APinDescription[SPI_PIN].ulPinType,
|
|
g_APinDescription[SPI_PIN].ulPin,
|
|
g_APinDescription[SPI_PIN].ulPinConfiguration);
|
|
spiInit(1);
|
|
spiInitMaded = true;
|
|
}
|
|
}
|
|
|
|
void spiInit(uint8_t spiRate) {
|
|
if(spiInitMaded == false) {
|
|
if(spiRate > 6) spiRate = 1;
|
|
|
|
#if MB(ALLIGATOR)
|
|
// Set SPI mode 1, clock, select not active after transfer, with delay between transfers
|
|
SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC,
|
|
SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
|
|
SPI_CSR_DLYBCT(1));
|
|
// Set SPI mode 0, clock, select not active after transfer, with delay between transfers
|
|
SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA |
|
|
SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
|
|
SPI_CSR_DLYBCT(1));
|
|
#endif//MB(ALLIGATOR)
|
|
|
|
// Set SPI mode 0, clock, select not active after transfer, with delay between transfers
|
|
SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA |
|
|
SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDueDividors[spiRate]) |
|
|
SPI_CSR_DLYBCT(1));
|
|
SPI_Enable(SPI0);
|
|
spiInitMaded = true;
|
|
}
|
|
}
|
|
|
|
// Write single byte to SPI
|
|
void spiSend(byte b) {
|
|
// write byte with address and end transmission flag
|
|
SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
|
|
// wait for transmit register empty
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
// wait for receive register
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
// clear status
|
|
SPI0->SPI_RDR;
|
|
//delayMicroseconds(1U);
|
|
}
|
|
|
|
void spiSend(const uint8_t* buf, size_t n) {
|
|
if (n == 0) return;
|
|
for (size_t i = 0; i < n - 1; i++) {
|
|
SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
SPI0->SPI_RDR;
|
|
//delayMicroseconds(1U);
|
|
}
|
|
spiSend(buf[n - 1]);
|
|
}
|
|
|
|
void spiSend(uint32_t chan, byte b) {
|
|
uint8_t dummy_read = 0;
|
|
// wait for transmit register empty
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
// write byte with address and end transmission flag
|
|
SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER;
|
|
// wait for receive register
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
// clear status
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
|
|
dummy_read = SPI0->SPI_RDR;
|
|
UNUSED(dummy_read);
|
|
}
|
|
|
|
void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
|
|
uint8_t dummy_read = 0;
|
|
if (n == 0) return;
|
|
for (int i = 0; i < (int)n - 1; i++) {
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan);
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
|
|
dummy_read = SPI0->SPI_RDR;
|
|
UNUSED(dummy_read);
|
|
}
|
|
spiSend(chan, buf[n - 1]);
|
|
}
|
|
|
|
// Read single byte from SPI
|
|
uint8_t spiRec() {
|
|
// write dummy byte with address and end transmission flag
|
|
SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER;
|
|
// wait for transmit register empty
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
|
|
// wait for receive register
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
// get byte from receive register
|
|
//delayMicroseconds(1U);
|
|
return SPI0->SPI_RDR;
|
|
}
|
|
|
|
uint8_t spiRec(uint32_t chan) {
|
|
uint8_t spirec_tmp;
|
|
// wait for transmit register empty
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 1)
|
|
spirec_tmp = SPI0->SPI_RDR;
|
|
UNUSED(spirec_tmp);
|
|
|
|
// write dummy byte with address and end transmission flag
|
|
SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER;
|
|
|
|
// wait for receive register
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
// get byte from receive register
|
|
return SPI0->SPI_RDR;
|
|
}
|
|
|
|
// Read from SPI into buffer
|
|
void spiRead(uint8_t*buf, uint16_t nbyte) {
|
|
if (nbyte-- == 0) return;
|
|
|
|
for (int i = 0; i < nbyte; i++) {
|
|
//while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN);
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
buf[i] = SPI0->SPI_RDR;
|
|
//delayMicroseconds(1U);
|
|
}
|
|
buf[nbyte] = spiRec();
|
|
}
|
|
|
|
// Write from buffer to SPI
|
|
void spiSendBlock(uint8_t token, const uint8_t* buf) {
|
|
SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
//while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
//SPI0->SPI_RDR;
|
|
for (int i = 0; i < 511; i++) {
|
|
SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN);
|
|
while ((SPI0->SPI_SR & SPI_SR_TDRE) == 0);
|
|
while ((SPI0->SPI_SR & SPI_SR_RDRF) == 0);
|
|
SPI0->SPI_RDR;
|
|
//delayMicroseconds(1U);
|
|
}
|
|
spiSend(buf[511]);
|
|
}
|
|
#endif // ENABLED(SOFTWARE_SPI)
|
|
|
|
#endif // ARDUINO_ARCH_SAM
|