bissen21/Marlin_Firmware
1
0
Fork 0
Code Issues Pull Requests Projects Releases 4 Wiki Activity
Marlin_Firmware/Marlin/src/module
History
Bob Anthony f642d8b79e 🐛 Fix extra E move in toolchange with ..._NO_RETURN (#22504)
2021-08-09 00:12:53 -05:00
..
stepper
✨ Extruder with Dual Stepper Drivers (#21403)
2021-06-15 00:12:20 -05:00
thermistor
✨ More flexible redundant temp sensor (#22085)
2021-06-15 00:09:52 -05:00
delta.cpp
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-17 02:41:31 -05:00
delta.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
endstops.cpp
🔧 HAS_CUSTOM_PROBE_PIN => USES_Z_MIN_PROBE_PIN
2021-08-08 23:54:48 -05:00
endstops.h
🔧 HAS_CUSTOM_PROBE_PIN => USES_Z_MIN_PROBE_PIN
2021-08-08 23:54:48 -05:00
motion.cpp
🐛 Redundant Temp Sensor followup (#22196)
2021-07-17 02:41:31 -05:00
motion.h
⚡️ Home Z (and maybe XY) at the start of G35 (#22060)
2021-06-15 00:12:27 -05:00
planner_bezier.cpp
🏗️ Support for up to 6 linear axes (#19112)
2021-06-15 00:05:03 -05:00
planner_bezier.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
planner.cpp
🐛 Fix 5-axis no extruder compile
2021-07-30 02:41:02 -05:00
planner.h
⚡️ Improve Sensorless homing/probing for G28, G33 (#21899)
2021-07-17 02:41:31 -05:00
printcounter.cpp
Don't display service prompt unless needed (#21654)
2021-04-24 00:09:51 -05:00
printcounter.h
Configure / disable PRINTCOUNTER save interval (#20856)
2021-01-26 02:30:31 -06:00
probe.cpp
🐛 Fix PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED
2021-07-30 02:37:36 -05:00
probe.h
🔧 HAS_CUSTOM_PROBE_PIN => USES_Z_MIN_PROBE_PIN
2021-08-08 23:54:48 -05:00
scara.cpp
🎨 Flags for homing directions
2021-05-22 16:09:18 -05:00
scara.h
Replace 'const float &' with 'const_float_t' (#21505)
2021-04-01 17:59:57 -05:00
servo.cpp
More IntelliSense-friendly declarations
2021-03-24 05:50:47 -05:00
servo.h
Remove extraneous 'extern' hints (#21516)
2021-04-02 14:22:43 -05:00
settings.cpp
🎨 Adjust settings.cpp indent
2021-08-09 00:01:29 -05:00
settings.h
Optimize MarlinSettings with template methods (#21426)
2021-03-24 07:32:08 -05:00
speed_lookuptable.h
Fix links to secure sites (#18745)
2020-07-22 22:20:14 -05:00
stepper.cpp
🐛 Fix Z_MULTI_ENDSTOPS + NUM_Z_STEPPER_DRIVERS 4 compile (#22203)
2021-06-27 11:25:36 -05:00
stepper.h
🏗️ Support for up to 6 linear axes (#19112)
2021-06-15 00:05:03 -05:00
temperature.cpp
🐛 Ensure Software SPI pins for Max Thermocouple (#22389)
2021-07-20 23:54:10 -05:00
temperature.h
🐛 Redundant Temp Sensor followup (#22196)
2021-07-17 02:41:31 -05:00
tool_change.cpp
🐛 Fix extra E move in toolchange with ..._NO_RETURN (#22504)
2021-08-09 00:12:53 -05:00
tool_change.h
Tool sensors (#17239)
2021-04-16 08:02:31 -05:00