Marlin_Firmware/Marlin/pins_BRAINWAVE_PRO.h
Dave Johnson 4718c09c48 Remove extraneous USBCON defines for AT90USB boards
USBCON is definied by serial.h pullikng in MarlinConfig.h which in turn pulls in Arduino.h.  Defining in later includes has shown to cause compile issues so removing all extraneous calls for and potentially easier future linker troubleshooting.
more USBCON unification
2017-07-23 16:41:48 -07:00

138 lines
4.1 KiB
C
Executable File

/**
* Marlin 3D Printer Firmware
* Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Brainwave Pro pin assignments (AT90USB1286)
*
* Requires hardware bundle for Arduino:
* https://github.com/unrepentantgeek/brainwave-arduino
*/
/**
* Rev B 16 JAN 2017
*
* Added pointers to currently available Arduino IDE extensions that will
* allow this board to use the latest Marlin software
*
*
* Rev C 2 JUN 2017
*
* Converted to Arduino pin numbering
*/
/**
* There are two Arduino IDE extensions that are compatible with this board
* and with the mainstream Marlin software.
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
* Installation instructions are at the above URL. Don't bother loading the
* libraries - they are not used with the Marlin software.
*
* Printrboard - https://github.com/scwimbush/Printrboard-HID-Arduino-IDE-Support
*
* Installation:
*
* 1. Go to the above URL, click on the "Clone or Download" button and then
* click on "Download ZIP" button.
* 2. Unzip the file, find the "printrboard" directory and then copy it to the
* hardware directory in Arduino. The Arduino hardware directory will probably
* be located in a path similar to this: C:\Program Files (x86)\Arduino\hardware.
* 3. Restart Arduino.
* 4. Select "Printrboard" from the 'Tools -> Boards' menu.
*
* Teensyduino is the most popular option. Printrboard is used if your board doesn't have
* the Teensyduino bootloader on it.
*/
/**
* To burn the bootloader that comes with Printrboard:
*
* 1. Connect your programmer to the board.
* 2. In the Arduino IDE select "Printrboard" and then select the programmer.
* 3. In the Arduino IDE click on "burn bootloader". Don't worry about the "verify failed at 1F000" error message.
* 4. The programmer is no longer needed. Remove it.
*/
#ifndef __AVR_AT90USB1286__
#error "Oops! Make sure you have 'Teensy++ 2.0' or 'Printrboard' selected from the 'Tools -> Boards' menu."
#endif
#define BOARD_NAME "Brainwave Pro"
#define LARGE_FLASH true
//
// Limit Switches
//
#define X_STOP_PIN 45 // F7
#define Y_STOP_PIN 12 // C2
#define Z_STOP_PIN 36 // E4
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 11 // C1
#endif
//
// Steppers
//
#define X_STEP_PIN 9 // E1
#define X_DIR_PIN 8 // E0
#define X_ENABLE_PIN 23 // B3
#define Y_STEP_PIN 7 // D7
#define Y_DIR_PIN 6 // D6
#define Y_ENABLE_PIN 20 // B0
#define Z_STEP_PIN 5 // D5
#define Z_DIR_PIN 4 // D4
#define Z_ENABLE_PIN 37 // E5
#define E0_STEP_PIN 47 // E3
#define E0_DIR_PIN 46 // E2
#define E0_ENABLE_PIN 25 // B5
//
// Temperature Sensors
//
#define TEMP_0_PIN 2 // F2 Analog Input
#define TEMP_1_PIN 1 // F1 Analog Input
#define TEMP_BED_PIN 0 // F0 Analog Input
//
// Heaters / Fans
//
#define HEATER_0_PIN 27 // B7
#define HEATER_BED_PIN 26 // B6 Bed
#define FAN_PIN 16 // C6 Fan, PWM3A
//
// Misc. Functions
//
#define SDSS 20 // B0
#define SD_DETECT_PIN 24 // B4
#define LED_PIN 13 // C3