53 lines
1.3 KiB
C
53 lines
1.3 KiB
C
#include <stdint.h>
|
|
|
|
|
|
#if !defined(SPI_FULL_SPEED)
|
|
|
|
/**
|
|
* SPI speed where 0 <= index <= 6
|
|
*
|
|
* Approximate rates :
|
|
*
|
|
* 0 : 8 - 10 MHz
|
|
* 1 : 4 - 5 MHz
|
|
* 2 : 2 - 2.5 MHz
|
|
* 3 : 1 - 1.25 MHz
|
|
* 4 : 500 - 625 kHz
|
|
* 5 : 250 - 312 kHz
|
|
* 6 : 125 - 156 kHz
|
|
*
|
|
* On AVR, actual speed is F_CPU/2^(1 + index).
|
|
* On other platforms, speed should be in range given above where possible.
|
|
*/
|
|
|
|
/** Set SCK to max rate */
|
|
#define SPI_FULL_SPEED 0
|
|
/** Set SCK rate to half max rate. */
|
|
#define SPI_HALF_SPEED 1
|
|
/** Set SCK rate to quarter max rate. */
|
|
#define SPI_QUARTER_SPEED 2
|
|
/** Set SCK rate to 1/8 max rate. */
|
|
#define SPI_EIGHTH_SPEED 3
|
|
/** Set SCK rate to 1/16 of max rate. */
|
|
#define SPI_SIXTEENTH_SPEED 4
|
|
/** Set SCK rate to 1/32 of max rate. */
|
|
#define SPI_SPEED_5 5
|
|
/** Set SCK rate to 1/64 of max rate. */
|
|
#define SPI_SPEED_6 6
|
|
|
|
// Standard SPI functions
|
|
/** Initialise SPI bus */
|
|
void spiBegin(void);
|
|
/** Configure SPI for specified SPI speed */
|
|
void spiInit(uint8_t spiRate);
|
|
/** Write single byte to SPI */
|
|
void spiSend(uint8_t b);
|
|
/** Read single byte from SPI */
|
|
uint8_t spiRec(void);
|
|
/** Read from SPI into buffer */
|
|
void spiRead(uint8_t* buf, uint16_t nbyte);
|
|
/** Write token and then write from 512 byte buffer to SPI (for SD card) */
|
|
void spiSendBlock(uint8_t token, const uint8_t* buf);
|
|
|
|
#endif
|