612 lines
18 KiB
C
612 lines
18 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
* English
|
|
*
|
|
* LCD Menu Messages
|
|
* See also https://github.com/MarlinFirmware/Marlin/wiki/LCD-Language
|
|
*
|
|
*/
|
|
#ifndef LANGUAGE_EN_H
|
|
#define LANGUAGE_EN_H
|
|
|
|
#ifndef WELCOME_MSG
|
|
#define WELCOME_MSG MACHINE_NAME " ready."
|
|
#endif
|
|
#ifndef MSG_SD_INSERTED
|
|
#define MSG_SD_INSERTED "Card inserted"
|
|
#endif
|
|
#ifndef MSG_SD_REMOVED
|
|
#define MSG_SD_REMOVED "Card removed"
|
|
#endif
|
|
#ifndef MSG_LCD_ENDSTOPS
|
|
#define MSG_LCD_ENDSTOPS "Endstops" // Max length 8 characters
|
|
#endif
|
|
#ifndef MSG_MAIN
|
|
#define MSG_MAIN "Main"
|
|
#endif
|
|
#ifndef MSG_AUTOSTART
|
|
#define MSG_AUTOSTART "Autostart"
|
|
#endif
|
|
#ifndef MSG_DISABLE_STEPPERS
|
|
#define MSG_DISABLE_STEPPERS "Disable steppers"
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME
|
|
#define MSG_AUTO_HOME "Auto home"
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME_X
|
|
#define MSG_AUTO_HOME_X "Home X"
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME_Y
|
|
#define MSG_AUTO_HOME_Y "Home Y"
|
|
#endif
|
|
#ifndef MSG_AUTO_HOME_Z
|
|
#define MSG_AUTO_HOME_Z "Home Z"
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_HOMING
|
|
#define MSG_LEVEL_BED_HOMING "Homing XYZ"
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_WAITING
|
|
#define MSG_LEVEL_BED_WAITING "Click to Begin"
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_NEXT_POINT
|
|
#define MSG_LEVEL_BED_NEXT_POINT "Next Point"
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_DONE
|
|
#define MSG_LEVEL_BED_DONE "Leveling Done!"
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED_CANCEL
|
|
#define MSG_LEVEL_BED_CANCEL "Cancel"
|
|
#endif
|
|
#ifndef MSG_SET_HOME_OFFSETS
|
|
#define MSG_SET_HOME_OFFSETS "Set home offsets"
|
|
#endif
|
|
#ifndef MSG_HOME_OFFSETS_APPLIED
|
|
#define MSG_HOME_OFFSETS_APPLIED "Offsets applied"
|
|
#endif
|
|
#ifndef MSG_SET_ORIGIN
|
|
#define MSG_SET_ORIGIN "Set origin"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1
|
|
#define MSG_PREHEAT_1 "Preheat PLA"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_N
|
|
#define MSG_PREHEAT_1_N MSG_PREHEAT_1 " "
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_ALL
|
|
#define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 " All"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_BEDONLY
|
|
#define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 " Bed"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_1_SETTINGS
|
|
#define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 " conf"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2
|
|
#define MSG_PREHEAT_2 "Preheat ABS"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_N
|
|
#define MSG_PREHEAT_2_N MSG_PREHEAT_2 " "
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_ALL
|
|
#define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 " All"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_BEDONLY
|
|
#define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 " Bed"
|
|
#endif
|
|
#ifndef MSG_PREHEAT_2_SETTINGS
|
|
#define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 " conf"
|
|
#endif
|
|
#ifndef MSG_COOLDOWN
|
|
#define MSG_COOLDOWN "Cooldown"
|
|
#endif
|
|
#ifndef MSG_SWITCH_PS_ON
|
|
#define MSG_SWITCH_PS_ON "Switch power on"
|
|
#endif
|
|
#ifndef MSG_SWITCH_PS_OFF
|
|
#define MSG_SWITCH_PS_OFF "Switch power off"
|
|
#endif
|
|
#ifndef MSG_EXTRUDE
|
|
#define MSG_EXTRUDE "Extrude"
|
|
#endif
|
|
#ifndef MSG_RETRACT
|
|
#define MSG_RETRACT "Retract"
|
|
#endif
|
|
#ifndef MSG_MOVE_AXIS
|
|
#define MSG_MOVE_AXIS "Move axis"
|
|
#endif
|
|
#ifndef MSG_LEVEL_BED
|
|
#define MSG_LEVEL_BED "Level bed"
|
|
#endif
|
|
#ifndef MSG_MOVE_X
|
|
#define MSG_MOVE_X "Move X"
|
|
#endif
|
|
#ifndef MSG_MOVE_Y
|
|
#define MSG_MOVE_Y "Move Y"
|
|
#endif
|
|
#ifndef MSG_MOVE_Z
|
|
#define MSG_MOVE_Z "Move Z"
|
|
#endif
|
|
#ifndef MSG_MOVE_E
|
|
#define MSG_MOVE_E "Extruder"
|
|
#endif
|
|
#ifndef MSG_MOVE_01MM
|
|
#define MSG_MOVE_01MM "Move 0.1mm"
|
|
#endif
|
|
#ifndef MSG_MOVE_1MM
|
|
#define MSG_MOVE_1MM "Move 1mm"
|
|
#endif
|
|
#ifndef MSG_MOVE_10MM
|
|
#define MSG_MOVE_10MM "Move 10mm"
|
|
#endif
|
|
#ifndef MSG_SPEED
|
|
#define MSG_SPEED "Speed"
|
|
#endif
|
|
#ifndef MSG_BED_Z
|
|
#define MSG_BED_Z "Bed Z"
|
|
#endif
|
|
#ifndef MSG_NOZZLE
|
|
#define MSG_NOZZLE "Nozzle"
|
|
#endif
|
|
#ifndef MSG_BED
|
|
#define MSG_BED "Bed"
|
|
#endif
|
|
#ifndef MSG_FAN_SPEED
|
|
#define MSG_FAN_SPEED "Fan speed"
|
|
#endif
|
|
#ifndef MSG_FLOW
|
|
#define MSG_FLOW "Flow"
|
|
#endif
|
|
#ifndef MSG_CONTROL
|
|
#define MSG_CONTROL "Control"
|
|
#endif
|
|
#ifndef MSG_MIN
|
|
#define MSG_MIN " " LCD_STR_THERMOMETER " Min"
|
|
#endif
|
|
#ifndef MSG_MAX
|
|
#define MSG_MAX " " LCD_STR_THERMOMETER " Max"
|
|
#endif
|
|
#ifndef MSG_FACTOR
|
|
#define MSG_FACTOR " " LCD_STR_THERMOMETER " Fact"
|
|
#endif
|
|
#ifndef MSG_AUTOTEMP
|
|
#define MSG_AUTOTEMP "Autotemp"
|
|
#endif
|
|
#ifndef MSG_ON
|
|
#define MSG_ON "On "
|
|
#endif
|
|
#ifndef MSG_OFF
|
|
#define MSG_OFF "Off"
|
|
#endif
|
|
#ifndef MSG_PID_P
|
|
#define MSG_PID_P "PID-P"
|
|
#endif
|
|
#ifndef MSG_PID_I
|
|
#define MSG_PID_I "PID-I"
|
|
#endif
|
|
#ifndef MSG_PID_D
|
|
#define MSG_PID_D "PID-D"
|
|
#endif
|
|
#ifndef MSG_PID_C
|
|
#define MSG_PID_C "PID-C"
|
|
#endif
|
|
#ifndef MSG_SELECT
|
|
#define MSG_SELECT "Select"
|
|
#endif
|
|
#ifndef MSG_ACC
|
|
#define MSG_ACC "Accel"
|
|
#endif
|
|
#ifndef MSG_VXY_JERK
|
|
#define MSG_VXY_JERK "Vxy-jerk"
|
|
#endif
|
|
#ifndef MSG_VZ_JERK
|
|
#define MSG_VZ_JERK "Vz-jerk"
|
|
#endif
|
|
#ifndef MSG_VE_JERK
|
|
#define MSG_VE_JERK "Ve-jerk"
|
|
#endif
|
|
#ifndef MSG_VMAX
|
|
#define MSG_VMAX "Vmax "
|
|
#endif
|
|
#ifndef MSG_VMIN
|
|
#define MSG_VMIN "Vmin"
|
|
#endif
|
|
#ifndef MSG_VTRAV_MIN
|
|
#define MSG_VTRAV_MIN "VTrav min"
|
|
#endif
|
|
#ifndef MSG_AMAX
|
|
#define MSG_AMAX "Amax "
|
|
#endif
|
|
#ifndef MSG_A_RETRACT
|
|
#define MSG_A_RETRACT "A-retract"
|
|
#endif
|
|
#ifndef MSG_A_TRAVEL
|
|
#define MSG_A_TRAVEL "A-travel"
|
|
#endif
|
|
#ifndef MSG_XSTEPS
|
|
#define MSG_XSTEPS "Xsteps/mm"
|
|
#endif
|
|
#ifndef MSG_YSTEPS
|
|
#define MSG_YSTEPS "Ysteps/mm"
|
|
#endif
|
|
#ifndef MSG_ZSTEPS
|
|
#define MSG_ZSTEPS "Zsteps/mm"
|
|
#endif
|
|
#ifndef MSG_ESTEPS
|
|
#define MSG_ESTEPS "Esteps/mm"
|
|
#endif
|
|
#ifndef MSG_TEMPERATURE
|
|
#define MSG_TEMPERATURE "Temperature"
|
|
#endif
|
|
#ifndef MSG_MOTION
|
|
#define MSG_MOTION "Motion"
|
|
#endif
|
|
#ifndef MSG_VOLUMETRIC
|
|
#define MSG_VOLUMETRIC "Filament"
|
|
#endif
|
|
#ifndef MSG_VOLUMETRIC_ENABLED
|
|
#define MSG_VOLUMETRIC_ENABLED "E in mm3"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_DIAM
|
|
#define MSG_FILAMENT_DIAM "Fil. Dia."
|
|
#endif
|
|
#ifndef MSG_CONTRAST
|
|
#define MSG_CONTRAST "LCD contrast"
|
|
#endif
|
|
#ifndef MSG_STORE_EPROM
|
|
#define MSG_STORE_EPROM "Store memory"
|
|
#endif
|
|
#ifndef MSG_LOAD_EPROM
|
|
#define MSG_LOAD_EPROM "Load memory"
|
|
#endif
|
|
#ifndef MSG_RESTORE_FAILSAFE
|
|
#define MSG_RESTORE_FAILSAFE "Restore failsafe"
|
|
#endif
|
|
#ifndef MSG_REFRESH
|
|
#define MSG_REFRESH "Refresh"
|
|
#endif
|
|
#ifndef MSG_WATCH
|
|
#define MSG_WATCH "Info screen"
|
|
#endif
|
|
#ifndef MSG_PREPARE
|
|
#define MSG_PREPARE "Prepare"
|
|
#endif
|
|
#ifndef MSG_TUNE
|
|
#define MSG_TUNE "Tune"
|
|
#endif
|
|
#ifndef MSG_PAUSE_PRINT
|
|
#define MSG_PAUSE_PRINT "Pause print"
|
|
#endif
|
|
#ifndef MSG_RESUME_PRINT
|
|
#define MSG_RESUME_PRINT "Resume print"
|
|
#endif
|
|
#ifndef MSG_STOP_PRINT
|
|
#define MSG_STOP_PRINT "Stop print"
|
|
#endif
|
|
#ifndef MSG_CARD_MENU
|
|
#define MSG_CARD_MENU "Print from SD"
|
|
#endif
|
|
#ifndef MSG_NO_CARD
|
|
#define MSG_NO_CARD "No SD card"
|
|
#endif
|
|
#ifndef MSG_DWELL
|
|
#define MSG_DWELL "Sleep..."
|
|
#endif
|
|
#ifndef MSG_USERWAIT
|
|
#define MSG_USERWAIT "Wait for user..."
|
|
#endif
|
|
#ifndef MSG_RESUMING
|
|
#define MSG_RESUMING "Resuming print"
|
|
#endif
|
|
#ifndef MSG_PRINT_ABORTED
|
|
#define MSG_PRINT_ABORTED "Print aborted"
|
|
#endif
|
|
#ifndef MSG_NO_MOVE
|
|
#define MSG_NO_MOVE "No move."
|
|
#endif
|
|
#ifndef MSG_KILLED
|
|
#define MSG_KILLED "KILLED. "
|
|
#endif
|
|
#ifndef MSG_STOPPED
|
|
#define MSG_STOPPED "STOPPED. "
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT
|
|
#define MSG_CONTROL_RETRACT "Retract mm"
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_SWAP
|
|
#define MSG_CONTROL_RETRACT_SWAP "Swap Re.mm"
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACTF
|
|
#define MSG_CONTROL_RETRACTF "Retract V"
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_ZLIFT
|
|
#define MSG_CONTROL_RETRACT_ZLIFT "Hop mm"
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_RECOVER
|
|
#define MSG_CONTROL_RETRACT_RECOVER "UnRet +mm"
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_RECOVER_SWAP
|
|
#define MSG_CONTROL_RETRACT_RECOVER_SWAP "S UnRet+mm"
|
|
#endif
|
|
#ifndef MSG_CONTROL_RETRACT_RECOVERF
|
|
#define MSG_CONTROL_RETRACT_RECOVERF "UnRet V"
|
|
#endif
|
|
#ifndef MSG_AUTORETRACT
|
|
#define MSG_AUTORETRACT "AutoRetr."
|
|
#endif
|
|
#ifndef MSG_FILAMENTCHANGE
|
|
#define MSG_FILAMENTCHANGE "Change filament"
|
|
#endif
|
|
#ifndef MSG_INIT_SDCARD
|
|
#define MSG_INIT_SDCARD "Init. SD card"
|
|
#endif
|
|
#ifndef MSG_CNG_SDCARD
|
|
#define MSG_CNG_SDCARD "Change SD card"
|
|
#endif
|
|
#ifndef MSG_ZPROBE_OUT
|
|
#define MSG_ZPROBE_OUT "Z probe out. bed"
|
|
#endif
|
|
#ifndef MSG_HOME
|
|
#define MSG_HOME "Home" // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST
|
|
#endif
|
|
#ifndef MSG_FIRST
|
|
#define MSG_FIRST "first"
|
|
#endif
|
|
#ifndef MSG_ZPROBE_ZOFFSET
|
|
#define MSG_ZPROBE_ZOFFSET "Z Offset"
|
|
#endif
|
|
#ifndef MSG_BABYSTEP_X
|
|
#define MSG_BABYSTEP_X "Babystep X"
|
|
#endif
|
|
#ifndef MSG_BABYSTEP_Y
|
|
#define MSG_BABYSTEP_Y "Babystep Y"
|
|
#endif
|
|
#ifndef MSG_BABYSTEP_Z
|
|
#define MSG_BABYSTEP_Z "Babystep Z"
|
|
#endif
|
|
#ifndef MSG_ENDSTOP_ABORT
|
|
#define MSG_ENDSTOP_ABORT "Endstop abort"
|
|
#endif
|
|
#ifndef MSG_HEATING_FAILED_LCD
|
|
#define MSG_HEATING_FAILED_LCD "Heating failed"
|
|
#endif
|
|
#ifndef MSG_ERR_REDUNDANT_TEMP
|
|
#define MSG_ERR_REDUNDANT_TEMP "Err: REDUNDANT TEMP"
|
|
#endif
|
|
#ifndef MSG_THERMAL_RUNAWAY
|
|
#define MSG_THERMAL_RUNAWAY "THERMAL RUNAWAY"
|
|
#endif
|
|
#ifndef MSG_ERR_MAXTEMP
|
|
#define MSG_ERR_MAXTEMP "Err: MAXTEMP"
|
|
#endif
|
|
#ifndef MSG_ERR_MINTEMP
|
|
#define MSG_ERR_MINTEMP "Err: MINTEMP"
|
|
#endif
|
|
#ifndef MSG_ERR_MAXTEMP_BED
|
|
#define MSG_ERR_MAXTEMP_BED "Err: MAXTEMP BED"
|
|
#endif
|
|
#ifndef MSG_ERR_MINTEMP_BED
|
|
#define MSG_ERR_MINTEMP_BED "Err: MINTEMP BED"
|
|
#endif
|
|
#ifndef MSG_HALTED
|
|
#define MSG_HALTED "PRINTER HALTED"
|
|
#endif
|
|
#ifndef MSG_PLEASE_RESET
|
|
#define MSG_PLEASE_RESET "Please reset"
|
|
#endif
|
|
#ifndef MSG_SHORT_DAY
|
|
#define MSG_SHORT_DAY "d" // One character only
|
|
#endif
|
|
#ifndef MSG_SHORT_HOUR
|
|
#define MSG_SHORT_HOUR "h" // One character only
|
|
#endif
|
|
#ifndef MSG_SHORT_MINUTE
|
|
#define MSG_SHORT_MINUTE "m" // One character only
|
|
#endif
|
|
#ifndef MSG_HEATING
|
|
#define MSG_HEATING "Heating..."
|
|
#endif
|
|
#ifndef MSG_HEATING_COMPLETE
|
|
#define MSG_HEATING_COMPLETE "Heating done."
|
|
#endif
|
|
#ifndef MSG_BED_HEATING
|
|
#define MSG_BED_HEATING "Bed Heating."
|
|
#endif
|
|
#ifndef MSG_BED_DONE
|
|
#define MSG_BED_DONE "Bed done."
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE
|
|
#define MSG_DELTA_CALIBRATE "Delta Calibration"
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_X
|
|
#define MSG_DELTA_CALIBRATE_X "Calibrate X"
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_Y
|
|
#define MSG_DELTA_CALIBRATE_Y "Calibrate Y"
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_Z
|
|
#define MSG_DELTA_CALIBRATE_Z "Calibrate Z"
|
|
#endif
|
|
#ifndef MSG_DELTA_CALIBRATE_CENTER
|
|
#define MSG_DELTA_CALIBRATE_CENTER "Calibrate Center"
|
|
#endif
|
|
|
|
#ifndef MSG_INFO_MENU
|
|
#define MSG_INFO_MENU "About Printer"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINTER_MENU
|
|
#define MSG_INFO_PRINTER_MENU "Printer Info"
|
|
#endif
|
|
#ifndef MSG_INFO_STATS_MENU
|
|
#define MSG_INFO_STATS_MENU "Printer Stats"
|
|
#endif
|
|
#ifndef MSG_INFO_BOARD_MENU
|
|
#define MSG_INFO_BOARD_MENU "Board Info"
|
|
#endif
|
|
#ifndef MSG_INFO_THERMISTOR_MENU
|
|
#define MSG_INFO_THERMISTOR_MENU "Thermistors"
|
|
#endif
|
|
#ifndef MSG_INFO_EXTRUDERS
|
|
#define MSG_INFO_EXTRUDERS "Extruders"
|
|
#endif
|
|
#ifndef MSG_INFO_BAUDRATE
|
|
#define MSG_INFO_BAUDRATE "Baud"
|
|
#endif
|
|
#ifndef MSG_INFO_PROTOCOL
|
|
#define MSG_INFO_PROTOCOL "Protocol"
|
|
#endif
|
|
|
|
#if LCD_WIDTH > 19
|
|
#ifndef MSG_INFO_PRINT_COUNT
|
|
#define MSG_INFO_PRINT_COUNT "Print Count"
|
|
#endif
|
|
#ifndef MSG_INFO_COMPLETED_PRINTS
|
|
#define MSG_INFO_COMPLETED_PRINTS "Completed"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_TIME
|
|
#define MSG_INFO_PRINT_TIME "Total print time"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_LONGEST
|
|
#define MSG_INFO_PRINT_LONGEST "Longest job time"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_FILAMENT
|
|
#define MSG_INFO_PRINT_FILAMENT "Extruded total"
|
|
#endif
|
|
#else
|
|
#ifndef MSG_INFO_PRINT_COUNT
|
|
#define MSG_INFO_PRINT_COUNT "Prints"
|
|
#endif
|
|
#ifndef MSG_INFO_COMPLETED_PRINTS
|
|
#define MSG_INFO_COMPLETED_PRINTS "Completed"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_TIME
|
|
#define MSG_INFO_PRINT_TIME "Total"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_LONGEST
|
|
#define MSG_INFO_PRINT_LONGEST "Longest"
|
|
#endif
|
|
#ifndef MSG_INFO_PRINT_FILAMENT
|
|
#define MSG_INFO_PRINT_FILAMENT "Extruded"
|
|
#endif
|
|
#endif
|
|
|
|
#ifndef MSG_INFO_MIN_TEMP
|
|
#define MSG_INFO_MIN_TEMP "Min Temp"
|
|
#endif
|
|
#ifndef MSG_INFO_MAX_TEMP
|
|
#define MSG_INFO_MAX_TEMP "Max Temp"
|
|
#endif
|
|
#ifndef MSG_INFO_PSU
|
|
#define MSG_INFO_PSU "Power Supply"
|
|
#endif
|
|
|
|
#ifndef MSG_FILAMENT_CHANGE_HEADER
|
|
#define MSG_FILAMENT_CHANGE_HEADER "CHANGE FILAMENT"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_OPTION_HEADER
|
|
#define MSG_FILAMENT_CHANGE_OPTION_HEADER "CHANGE OPTIONS:"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_OPTION_EXTRUDE
|
|
#define MSG_FILAMENT_CHANGE_OPTION_EXTRUDE "Extrude more"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_OPTION_RESUME
|
|
#define MSG_FILAMENT_CHANGE_OPTION_RESUME "Resume print"
|
|
#endif
|
|
#if LCD_HEIGHT >= 4
|
|
#ifndef MSG_FILAMENT_CHANGE_INIT_1
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Wait for start"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INIT_2
|
|
#define MSG_FILAMENT_CHANGE_INIT_2 "of the filament"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INIT_3
|
|
#define MSG_FILAMENT_CHANGE_INIT_3 "change"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Wait for"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_2
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_2 "filament unload"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_3
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_3 ""
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert filament"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INSERT_2
|
|
#define MSG_FILAMENT_CHANGE_INSERT_2 "and press button"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INSERT_3
|
|
#define MSG_FILAMENT_CHANGE_INSERT_3 "to continue..."
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Wait for"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_LOAD_2
|
|
#define MSG_FILAMENT_CHANGE_LOAD_2 "filament load"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_LOAD_3
|
|
#define MSG_FILAMENT_CHANGE_LOAD_3 ""
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Wait for"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_2
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_2 "filament extrude"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_3
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_3 ""
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Wait for print"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_RESUME_2
|
|
#define MSG_FILAMENT_CHANGE_RESUME_2 "to resume"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_RESUME_3
|
|
#define MSG_FILAMENT_CHANGE_RESUME_3 ""
|
|
#endif
|
|
#else // LCD_HEIGHT < 4
|
|
#ifndef MSG_FILAMENT_CHANGE_INIT_1
|
|
#define MSG_FILAMENT_CHANGE_INIT_1 "Please wait..."
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_UNLOAD_1
|
|
#define MSG_FILAMENT_CHANGE_UNLOAD_1 "Ejecting..."
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_INSERT_1
|
|
#define MSG_FILAMENT_CHANGE_INSERT_1 "Insert and Click"
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_LOAD_1
|
|
#define MSG_FILAMENT_CHANGE_LOAD_1 "Loading..."
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_EXTRUDE_1
|
|
#define MSG_FILAMENT_CHANGE_EXTRUDE_1 "Extruding..."
|
|
#endif
|
|
#ifndef MSG_FILAMENT_CHANGE_RESUME_1
|
|
#define MSG_FILAMENT_CHANGE_RESUME_1 "Resuming..."
|
|
#endif
|
|
#endif // LCD_HEIGHT < 4
|
|
|
|
#endif // LANGUAGE_EN_H
|