/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * Ortur 4 Arduino Mega based on RAMPS v1.4 pin assignments
 */

#define BOARD_INFO_NAME "Ortur 4.3"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

//
// Servos
//
#define SERVO0_PIN                            29

//
// Limit Switches
//
#define X_MAX_PIN                             18
#define Z_MIN_PIN                             63

#define Z_MIN_PROBE_PIN                        2
#define FIL_RUNOUT_PIN                        59

//
// Steppers
//
#define E0_CS_PIN                             44
#define E1_CS_PIN                             42

//
// Temperature Sensors
//
#define TEMP_0_PIN                            15  // Analog Input
#define TEMP_1_PIN                            13  // Analog Input

//
// Software serial
//
#define X_SERIAL_TX_PIN                       59
#define X_SERIAL_RX_PIN                       63

#define Y_SERIAL_TX_PIN                       64
#define Y_SERIAL_RX_PIN                       40

#define Z_SERIAL_TX_PIN                       44
#define Z_SERIAL_RX_PIN                       42

#define E0_SERIAL_TX_PIN                      66
#define E0_SERIAL_RX_PIN                      65

#include "pins_RAMPS.h"

//
// Steppers
//
#undef E0_STEP_PIN
#undef E0_DIR_PIN
#undef E0_ENABLE_PIN
#define E0_STEP_PIN                           36
#define E0_DIR_PIN                            34
#define E0_ENABLE_PIN                         30

#undef E1_STEP_PIN
#undef E1_DIR_PIN
#undef E1_ENABLE_PIN
#define E1_STEP_PIN                           26
#define E1_DIR_PIN                            28
#define E1_ENABLE_PIN                         24

//
// LCD / Controller
//
#if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
  #undef BEEPER_PIN
  #define BEEPER_PIN                          35

  #undef LCD_PINS_RS
  #undef LCD_PINS_ENABLE
  #undef LCD_PINS_D4
  #define LCD_PINS_RS                         27
  #define LCD_PINS_ENABLE                     23
  #define LCD_PINS_D4                         37

  #undef LCD_SDSS
  #undef SD_DETECT_PIN
  #define LCD_SDSS                            53
  #define SD_DETECT_PIN                       49

  #undef BTN_EN1
  #undef BTN_EN2
  #undef BTN_ENC
  #define BTN_EN1                             29
  #define BTN_EN2                             25
  #define BTN_ENC                             16
#endif