/** * Marlin 3D Printer Firmware * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * KRATOS32 */ #include "env_validate.h" #define BOARD_INFO_NAME "K.3D KRATOS32" // // EEPROM // #if EITHER(NO_EEPROM_SELECTED, I2C_EEPROM) #define I2C_EEPROM #define MARLIN_EEPROM_SIZE 0x1F400 // 16KB #endif // // Servos // #define SERVO0_PIN 6 #define SERVO1_PIN 5 #define SERVO2_PIN 39 #define SERVO3_PIN 40 // CAMERA_PIN (extended to the top of the LCD module) #define SERVO4_PIN 45 // FIL_RUNOUT_PIN // // Limit Switches // #define X_MIN_PIN 28 #define X_MAX_PIN 34 #define Y_MIN_PIN 30 #define Y_MAX_PIN 36 #define Z_MIN_PIN 32 #define Z_MAX_PIN 38 // // Steppers // #define X_STEP_PIN 24 #define X_DIR_PIN 23 #define X_ENABLE_PIN 26 #ifndef X_CS_PIN #define X_CS_PIN 25 #endif #define Y_STEP_PIN 17 #define Y_DIR_PIN 16 #define Y_ENABLE_PIN 22 #ifndef Y_CS_PIN #define Y_CS_PIN 27 #endif #define Z_STEP_PIN 2 #define Z_DIR_PIN 3 #define Z_ENABLE_PIN 15 #ifndef Z_CS_PIN #define Z_CS_PIN 29 #endif #define E0_STEP_PIN 61 #define E0_DIR_PIN 60 #define E0_ENABLE_PIN 62 #ifndef E0_CS_PIN #define E0_CS_PIN 31 #endif #define E1_STEP_PIN 64 #define E1_DIR_PIN 63 #define E1_ENABLE_PIN 65 #ifndef E1_CS_PIN #define E1_CS_PIN 37 #endif #define E2_STEP_PIN 68 #define E2_DIR_PIN 67 #define E2_ENABLE_PIN 69 #ifndef E2_CS_PIN #define E2_CS_PIN 35 #endif #define E3_STEP_PIN 51 #define E3_DIR_PIN 53 #define E3_ENABLE_PIN 49 #ifndef E3_CS_PIN #define E3_CS_PIN 33 #endif // // Temperature Sensors // #define TEMP_0_PIN 0 // Analog Input #define TEMP_1_PIN 1 // Analog Input #define TEMP_2_PIN 2 // Analog Input #define TEMP_3_PIN 3 // Analog Input #define TEMP_BED_PIN 4 // Analog Input // // Heaters / Fans // #define HEATER_0_PIN 13 #define HEATER_1_PIN 12 #define HEATER_2_PIN 11 #define HEATER_3_PIN 10 #define HEATER_BED_PIN 7 // BED #ifndef FAN_PIN #define FAN_PIN 9 #endif #define FAN1_PIN 8 // // Misc. Functions // #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 45 // SERVO4_PIN #endif #ifndef PS_ON_PIN #define PS_ON_PIN 59 #endif // // LCD / Controller // #if HAS_WIRED_LCD #define BTN_EN1 48 #define BTN_EN2 50 #define BTN_ENC 46 #define SDSS 4 #define SD_DETECT_PIN 14 #define BEEPER_PIN 41 #define KILL_PIN 66 #if IS_RRD_FG_SC #define LCD_PINS_RS 42 #define LCD_PINS_ENABLE 43 #define LCD_PINS_D4 44 #define BTN_BACK 52 #elif ENABLED(K3D_242_OLED_CONTROLLER) #define LCD_PINS_DC 44 #define LCD_PINS_RS 42 #define DOGLCD_CS 52 #define DOGLCD_MOSI 43 #define DOGLCD_SCK 47 #define DOGLCD_A0 LCD_PINS_DC #endif #endif // HAS_WIRED_LCD