/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* The monitor_driver routines are a close copy of the TMC code
*/
#include "../../inc/MarlinConfig.h"
#if HAS_DRIVER(L6470)
#include "L6470_Marlin.h"
L6470_Marlin L6470;
#include "../stepper_indirection.h"
#include "../../gcode/gcode.h"
#include "../planner.h"
#define DEBUG_OUT ENABLED(L6470_CHITCHAT)
#include "../../core/debug_out.h"
uint8_t L6470_Marlin::dir_commands[MAX_L6470]; // array to hold direction command for each driver
char L6470_Marlin::index_to_axis[MAX_L6470][3] = { "X ", "Y ", "Z ", "X2", "Y2", "Z2", "Z3", "E0", "E1", "E2", "E3", "E4", "E5" };
bool L6470_Marlin::index_to_dir[MAX_L6470] = {
INVERT_X_DIR , // 0 X
INVERT_Y_DIR , // 1 Y
INVERT_Z_DIR , // 2 Z
#if ENABLED(X_DUAL_STEPPER_DRIVERS)
INVERT_X_DIR ^ INVERT_X2_VS_X_DIR , // 3 X2
#else
INVERT_X_DIR , // 3 X2
#endif
#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
INVERT_Y_DIR ^ INVERT_Y2_VS_Y_DIR , // 4 Y2
#else
INVERT_Y_DIR , // 4 Y2
#endif
INVERT_Z_DIR , // 5 Z2
INVERT_Z_DIR , // 6 Z3
INVERT_E0_DIR , // 7 E0
INVERT_E1_DIR , // 8 E1
INVERT_E2_DIR , // 9 E2
INVERT_E3_DIR , //10 E3
INVERT_E4_DIR , //11 E4
INVERT_E5_DIR , //12 E5
};
uint8_t L6470_Marlin::axis_xref[MAX_L6470] = {
AxisEnum(X_AXIS), // X
AxisEnum(Y_AXIS), // Y
AxisEnum(Z_AXIS), // Z
AxisEnum(X_AXIS), // X2
AxisEnum(Y_AXIS), // Y2
AxisEnum(Z_AXIS), // Z2
AxisEnum(Z_AXIS), // Z3
AxisEnum(E_AXIS), // E0
AxisEnum(E_AXIS), // E1
AxisEnum(E_AXIS), // E2
AxisEnum(E_AXIS), // E3
AxisEnum(E_AXIS), // E4
AxisEnum(E_AXIS) // E5
};
volatile bool L6470_Marlin::spi_abort = false;
bool L6470_Marlin::spi_active = false;
void L6470_Marlin::populate_chain_array() {
#define _L6470_INIT_SPI(Q) do{ stepper##Q.set_chain_info(Q, Q##_CHAIN_POS); }while(0)
#if AXIS_DRIVER_TYPE_X(L6470)
_L6470_INIT_SPI(X);
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
_L6470_INIT_SPI(X2);
#endif
#if AXIS_DRIVER_TYPE_Y(L6470)
_L6470_INIT_SPI(Y);
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
_L6470_INIT_SPI(Y2);
#endif
#if AXIS_DRIVER_TYPE_Z(L6470)
_L6470_INIT_SPI(Z);
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
_L6470_INIT_SPI(Z2);
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
_L6470_INIT_SPI(Z3);
#endif
#if AXIS_DRIVER_TYPE_E0(L6470)
_L6470_INIT_SPI(E0);
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
_L6470_INIT_SPI(E1);
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
_L6470_INIT_SPI(E2);
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
_L6470_INIT_SPI(E3);
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
_L6470_INIT_SPI(E4);
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
_L6470_INIT_SPI(E5);
#endif
}
void L6470_Marlin::init() { // Set up SPI and then init chips
#if PIN_EXISTS(L6470_RESET_CHAIN)
OUT_WRITE(L6470_RESET_CHAIN_PIN, LOW); // hardware reset of drivers
delay(1);
OUT_WRITE(L6470_RESET_CHAIN_PIN, HIGH);
delay(1); // need about 650uS for the chip to fully start up
#endif
populate_chain_array(); // Set up array to control where in the SPI transfer sequence a particular stepper's data goes
L6470_spi_init(); // Set up L6470 soft SPI pins
init_to_defaults(); // init the chips
}
uint16_t L6470_Marlin::get_status(const uint8_t axis) {
#define GET_L6470_STATUS(Q) stepper##Q.getStatus()
switch (axis) {
#if AXIS_DRIVER_TYPE_X(L6470)
case 0: return GET_L6470_STATUS(X);
#endif
#if AXIS_DRIVER_TYPE_Y(L6470)
case 1: return GET_L6470_STATUS(Y);
#endif
#if AXIS_DRIVER_TYPE_Z(L6470)
case 2: return GET_L6470_STATUS(Z);
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
case 3: return GET_L6470_STATUS(X2);
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
case 4: return GET_L6470_STATUS(Y2);
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
case 5: return GET_L6470_STATUS(Z2);
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
case 6: return GET_L6470_STATUS(Z3);
#endif
#if AXIS_DRIVER_TYPE_E0(L6470)
case 7: return GET_L6470_STATUS(E0);
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
case 8: return GET_L6470_STATUS(E1);
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
case 9: return GET_L6470_STATUS(E2);
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
case 10: return GET_L6470_STATUS(E3);
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
case 11: return GET_L6470_STATUS(E4);
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
case 12: return GET_L6470_STATUS(E5);
#endif
}
return 0; // Not needed but kills a compiler warning
}
uint32_t L6470_Marlin::get_param(uint8_t axis, uint8_t param) {
#define GET_L6470_PARAM(Q) L6470_GETPARAM(param,Q)
switch (axis) {
#if AXIS_DRIVER_TYPE_X(L6470)
case 0: return GET_L6470_PARAM(X);
#endif
#if AXIS_DRIVER_TYPE_Y(L6470)
case 1: return GET_L6470_PARAM(Y);
#endif
#if AXIS_DRIVER_TYPE_Z(L6470)
case 2: return GET_L6470_PARAM(Z);
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
case 3: return GET_L6470_PARAM(X2);
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
case 4: return GET_L6470_PARAM(Y2);
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
case 5: return GET_L6470_PARAM(Z2);
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
case 6: return GET_L6470_PARAM(Z3);
#endif
#if AXIS_DRIVER_TYPE_E0(L6470)
case 7: return GET_L6470_PARAM(E0);
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
case 8: return GET_L6470_PARAM(E1);
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
case 9: return GET_L6470_PARAM(E2);
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
case 10: return GET_L6470_PARAM(E3);
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
case 11: return GET_L6470_PARAM(E4);
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
case 12: return GET_L6470_PARAM(E5);
#endif
}
return 0 ; // not needed but kills a compiler warning
}
void L6470_Marlin::set_param(uint8_t axis, uint8_t param, uint32_t value) {
#define SET_L6470_PARAM(Q) stepper##Q.SetParam(param, value)
switch (axis) {
#if AXIS_DRIVER_TYPE_X(L6470)
case 0: SET_L6470_PARAM(X);
#endif
#if AXIS_DRIVER_TYPE_Y(L6470)
case 1: SET_L6470_PARAM(Y);
#endif
#if AXIS_DRIVER_TYPE_Z(L6470)
case 2: SET_L6470_PARAM(Z);
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
case 3: SET_L6470_PARAM(X2);
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
case 4: SET_L6470_PARAM(Y2);
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
case 5: SET_L6470_PARAM(Z2);
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
case 6: SET_L6470_PARAM(Z3);
#endif
#if AXIS_DRIVER_TYPE_E0(L6470)
case 7: SET_L6470_PARAM(E0);
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
case 8: SET_L6470_PARAM(E1);
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
case 9: SET_L6470_PARAM(E2);
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
case 10: SET_L6470_PARAM(E3);
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
case 11: SET_L6470_PARAM(E4);
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
case 12: SET_L6470_PARAM(E5);
#endif
}
}
inline void echo_min_max(const char a, const float &min, const float &max) {
DEBUG_CHAR(' '); DEBUG_CHAR(a);
DEBUG_ECHOPAIR(" min = ", min);
DEBUG_ECHOLNPAIR(" max = ", max);
}
inline void echo_oct_used(const float &oct, const bool stall) {
DEBUG_ECHOPAIR("over_current_threshold used : ", oct);
serialprintPGM(stall ? PSTR(" (Stall") : PSTR(" (OCD"));
DEBUG_ECHOLNPGM(" threshold)");
}
inline void err_out_of_bounds() { DEBUG_ECHOLNPGM("ERROR - motion out of bounds"); }
bool L6470_Marlin::get_user_input(uint8_t &driver_count, uint8_t axis_index[3], char axis_mon[3][3],
float &position_max, float &position_min, float &final_feedrate, uint8_t &kval_hold,
bool over_current_flag, uint8_t &OCD_TH_val, uint8_t &STALL_TH_val, uint16_t &over_current_threshold
) {
// Return TRUE if the calling routine needs to abort/kill
uint16_t displacement = 0; // " = 0" to eliminate compiler warning
uint8_t j; // general purpose counter
if (!all_axes_homed()) {
DEBUG_ECHOLNPGM("ERROR - home all before running this command");
//return true;
}
LOOP_XYZE(i) if (uint16_t _displacement = parser.intval(axis_codes[i])) {
displacement = _displacement;
uint8_t axis_offset = parser.byteval('J');
axis_mon[0][0] = axis_codes[i]; // axis ASCII value (target character)
if (axis_offset >= 2 || axis_mon[0][0] == 'E') // Single axis, E0, or E1
axis_mon[0][1] = axis_offset + '0';
else if (axis_offset == 0) { // one or more axes
uint8_t driver_count_local = 0; // can't use "driver_count" directly as a subscript because it's passed by reference
for (j = 0; j < MAX_L6470; j++) // see how many drivers on this axis
if (axis_mon[0][0] == index_to_axis[j][0]) {
axis_mon[driver_count_local][0] = axis_mon[0][0];
axis_mon[driver_count_local][1] = index_to_axis[j][1];
axis_mon[driver_count_local][2] = index_to_axis[j][2]; // append end of string
axis_index[driver_count_local] = j; // set axis index
driver_count_local++;
}
driver_count = driver_count_local;
}
break; // only take first axis found
}
//
// Position calcs & checks
//
const float center[] = {
LOGICAL_X_POSITION(current_position[X_AXIS]),
LOGICAL_Y_POSITION(current_position[Y_AXIS]),
LOGICAL_Z_POSITION(current_position[Z_AXIS]),
current_position[E_AXIS]
};
switch (axis_mon[0][0]) {
default: position_max = position_min = 0; break;
case 'X': {
position_min = center[X_AXIS] - displacement;
position_max = center[X_AXIS] + displacement;
echo_min_max('X', position_min, position_max);
if (false
#ifdef X_MIN_POS
|| position_min < (X_MIN_POS)
#endif
#ifdef X_MAX_POS
|| position_max > (X_MAX_POS)
#endif
) {
err_out_of_bounds();
return true;
}
} break;
case 'Y': {
position_min = center[Y_AXIS] - displacement;
position_max = center[Y_AXIS] + displacement;
echo_min_max('Y', position_min, position_max);
if (false
#ifdef Y_MIN_POS
|| position_min < (Y_MIN_POS)
#endif
#ifdef Y_MAX_POS
|| position_max > (Y_MAX_POS)
#endif
) {
err_out_of_bounds();
return true;
}
} break;
case 'Z': {
position_min = center[E_AXIS] - displacement;
position_max = center[E_AXIS] + displacement;
echo_min_max('Z', position_min, position_max);
if (false
#ifdef Z_MIN_POS
|| position_min < (Z_MIN_POS)
#endif
#ifdef Z_MAX_POS
|| position_max > (Z_MAX_POS)
#endif
) {
err_out_of_bounds();
return true;
}
} break;
case 'E': {
position_min = center[E_AXIS] - displacement;
position_max = center[E_AXIS] + displacement;
echo_min_max('E', position_min, position_max);
} break;
}
//
// Work on the drivers
//
for (uint8_t k = 0; k < driver_count; k++) {
bool not_found = true;
for (j = 1; j <= L6470::chain[0]; j++) {
const char * const ind_axis = index_to_axis[L6470::chain[j]];
if (ind_axis[0] == axis_mon[k][0] && ind_axis[1] == axis_mon[k][1]) { // See if a L6470 driver
not_found = false;
break;
}
}
if (not_found) {
driver_count = k;
axis_mon[k][0] = ' '; // mark this entry invalid
break;
}
}
if (driver_count == 0) {
DEBUG_ECHOLNPGM("ERROR - not a L6470 axis");
return true;
}
DEBUG_ECHOPGM("Monitoring:");
for (j = 0; j < driver_count; j++) DEBUG_ECHOPAIR(" ", axis_mon[j]);
L6470_EOL();
// now have a list of driver(s) to monitor
//
// kVAL_HOLD checks & settings
//
kval_hold = parser.byteval('K');
if (kval_hold) {
DEBUG_ECHOLNPAIR("kval_hold = ", kval_hold);
for (j = 0; j < driver_count; j++)
set_param(axis_index[j], L6470_KVAL_HOLD, kval_hold);
}
else {
// only print the KVAL_HOLD from one of the drivers
kval_hold = get_param(axis_index[0], L6470_KVAL_HOLD);
DEBUG_ECHOLNPAIR("KVAL_HOLD = ", kval_hold);
}
//
// Overcurrent checks & settings
//
if (over_current_flag) {
uint8_t OCD_TH_val_local = 0, // compiler thinks OCD_TH_val is unused if use it directly
STALL_TH_val_local = 0; // just in case ...
over_current_threshold = parser.intval('I');
if (over_current_threshold) {
OCD_TH_val_local = over_current_threshold/375;
LIMIT(OCD_TH_val_local, 0, 15);
STALL_TH_val_local = over_current_threshold/31.25;
LIMIT(STALL_TH_val_local, 0, 127);
uint16_t OCD_TH_actual = (OCD_TH_val_local + 1) * 375,
STALL_TH_actual = (STALL_TH_val_local + 1) * 31.25;
if (OCD_TH_actual < STALL_TH_actual) {
OCD_TH_val_local++;
OCD_TH_actual = (OCD_TH_val_local + 1) * 375;
}
DEBUG_ECHOLNPAIR("over_current_threshold specified: ", over_current_threshold);
echo_oct_used(STALL_TH_actual, true);
echo_oct_used(OCD_TH_actual, false);
#define SET_OVER_CURRENT(Q) do { stepper##Q.SetParam(L6470_STALL_TH, STALL_TH_val_local); stepper##Q.SetParam(L6470_OCD_TH, OCD_TH_val_local);} while (0)
for (j = 0; j < driver_count; j++) {
set_param(axis_index[j], L6470_STALL_TH, STALL_TH_val_local);
set_param(axis_index[j], L6470_OCD_TH, OCD_TH_val_local);
}
}
else {
// only get & print the OVER_CURRENT values from one of the drivers
STALL_TH_val_local = get_param(axis_index[0], L6470_STALL_TH);
OCD_TH_val_local = get_param(axis_index[0], L6470_OCD_TH);
echo_oct_used((STALL_TH_val_local + 1) * 31.25, true);
echo_oct_used((OCD_TH_val_local + 1) * 375, false);
} // over_current_threshold
for (j = 0; j < driver_count; j++) { // set all drivers on axis the same
set_param(axis_index[j], L6470_STALL_TH, STALL_TH_val_local);
set_param(axis_index[j], L6470_OCD_TH, OCD_TH_val_local);
}
OCD_TH_val = OCD_TH_val_local; // force compiler to update the main routine's copy
STALL_TH_val = STALL_TH_val_local; // force compiler to update the main routine's copy
} // end of overcurrent
//
// Feedrate
//
final_feedrate = parser.floatval('F');
if (final_feedrate == 0) {
static constexpr float default_max_feedrate[] = DEFAULT_MAX_FEEDRATE;
const uint8_t num_feedrates = COUNT(default_max_feedrate);
for (j = 0; j < num_feedrates; j++) {
if (axis_codes[j] == axis_mon[0][0]) {
final_feedrate = default_max_feedrate[j];
break;
}
}
if (j == 3 && num_feedrates > 4) { // have more than one extruder feedrate
uint8_t extruder_num = axis_mon[0][1] - '0';
if (j <= num_feedrates - extruder_num) // have a feedrate specifically for this extruder
final_feedrate = default_max_feedrate[j + extruder_num];
else
final_feedrate = default_max_feedrate[3]; // use E0 feedrate for this extruder
}
final_feedrate *= 60; // convert to mm/minute
} // end of feedrate
return false; // FALSE indicates no user input problems
}
#if ENABLED(L6470_CHITCHAT)
inline void echo_yes_no(const bool yes) { serialprintPGM(yes ? PSTR("YES") : PSTR("NO ")); }
#endif
void L6470_Marlin::say_axis(const uint8_t axis, const bool label/*=true*/) {
if (label) SERIAL_ECHOPGM("AXIS:");
SERIAL_CHAR(' ');
SERIAL_CHAR(index_to_axis[axis][0]);
SERIAL_CHAR(index_to_axis[axis][1]);
SERIAL_CHAR(' ');
}
void L6470_Marlin::error_status_decode(const uint16_t status, const uint8_t axis) { // assumes status bits have been inverted
#if ENABLED(L6470_CHITCHAT)
char temp_buf[10];
say_axis(axis);
sprintf_P(temp_buf, PSTR(" %4x "), status);
DEBUG_ECHO(temp_buf);
print_bin(status);
DEBUG_ECHOPGM(" THERMAL: ");
serialprintPGM((status & STATUS_TH_SD) ? PSTR("SHUTDOWN") : (status & STATUS_TH_WRN) ? PSTR("WARNING ") : PSTR("OK "));
DEBUG_ECHOPGM(" OVERCURRENT: ");
echo_yes_no(status & STATUS_OCD);
DEBUG_ECHOPGM(" STALL: ");
echo_yes_no(status & (STATUS_STEP_LOSS_A | STATUS_STEP_LOSS_B));
L6470_EOL();
#else
UNUSED(status); UNUSED(axis);
#endif
}
//////////////////////////////////////////////////////////////////////////////////////////////////
////
//// MONITOR_L6470_DRIVER_STATUS routines
////
//////////////////////////////////////////////////////////////////////////////////////////////////
#if ENABLED(MONITOR_L6470_DRIVER_STATUS)
struct L6470_driver_data {
uint8_t driver_index;
uint32_t driver_status;
bool is_otw;
uint8_t otw_counter;
bool is_ot;
bool is_hi_Z;
uint8_t com_counter;
};
L6470_driver_data driver_L6470_data[] = {
#if AXIS_DRIVER_TYPE_X(L6470)
{ 0, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_Y(L6470)
{ 1, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_Z(L6470)
{ 2, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
{ 3, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
{ 4, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
{ 5, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
{ 6, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_E0(L6470)
{ 7, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
{ 8, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
{ 9, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
{ 10, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
{ 11, 0, 0, 0, 0, 0, 0 },
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
{ 12, 0, 0, 0, 0, 0, 0 }
#endif
};
inline void append_stepper_err(char * &p, const uint8_t stepper_index, const char * const err=nullptr) {
p += sprintf_P(p, PSTR("Stepper %c%c "), char(index_to_axis[stepper_index][0]), char(index_to_axis[stepper_index][1]));
if (err) p += sprintf_P(p, err);
}
void L6470_monitor_update(uint8_t stepper_index, uint16_t status) {
if (spi_abort) return; // don't do anything if set_directions() has occurred
uint8_t kval_hold;
char temp_buf[120];
char* p = &temp_buf[0];
uint8_t j;
for (j = 0; j < L6470::chain[0]; j++) // find the table for this stepper
if (driver_L6470_data[j].driver_index == stepper_index) break;
driver_L6470_data[j].driver_status = status;
uint16_t _status = ~status; // all error bits are active low
if (status == 0 || status == 0xFFFF) { // com problem
if (driver_L6470_data[j].com_counter == 0) { // warn user when it first happens
driver_L6470_data[j].com_counter++;
append_stepper_err(p, stepper_index, PSTR(" - communications lost\n"));
DEBUG_ECHO(temp_buf);
}
else {
driver_L6470_data[j].com_counter++;
if (driver_L6470_data[j].com_counter > 240) { // remind of com problem about every 2 minutes
driver_L6470_data[j].com_counter = 1;
append_stepper_err(p, stepper_index, PSTR(" - still no communications\n"));
DEBUG_ECHO(temp_buf);
}
}
}
else {
if (driver_L6470_data[j].com_counter) { // comms re-established
driver_L6470_data[j].com_counter = 0;
append_stepper_err(p, stepper_index, PSTR(" - communications re-established\n.. setting all drivers to default values\n"));
DEBUG_ECHO(temp_buf);
init_to_defaults();
}
else {
// no com problems - do the usual checks
if (_status & L6470_ERROR_MASK) {
append_stepper_err(p, stepper_index);
if (status & STATUS_HIZ) { // the driver has shut down HiZ is active high
driver_L6470_data[j].is_hi_Z = true;
p += sprintf_P(p, PSTR("%cIS SHUT DOWN"), ' ');
// if (_status & STATUS_TH_SD) { // strange - TH_SD never seems to go active, must be implied by the HiZ and TH_WRN
if (_status & STATUS_TH_WRN) { // over current shutdown
p += sprintf_P(p, PSTR("%cdue to over temperature"), ' ');
driver_L6470_data[j].is_ot = true;
kval_hold = get_param(stepper_index, L6470_KVAL_HOLD) - 2 * KVAL_HOLD_STEP_DOWN;
set_param(stepper_index, L6470_KVAL_HOLD, kval_hold); // reduce KVAL_HOLD
p += sprintf_P(p, PSTR(" - KVAL_HOLD reduced by %d to %d"), 2 * KVAL_HOLD_STEP_DOWN, kval_hold); // let user know
}
else
driver_L6470_data[j].is_ot = false;
}
else {
driver_L6470_data[j].is_hi_Z = false;
if (_status & STATUS_TH_WRN) { // have an over temperature warning
driver_L6470_data[j].is_otw = true;
driver_L6470_data[j].otw_counter++;
kval_hold = get_param(stepper_index, L6470_KVAL_HOLD);
if (driver_L6470_data[j].otw_counter > 4) { // otw present for 2 - 2.5 seconds, reduce KVAL_HOLD
kval_hold -= KVAL_HOLD_STEP_DOWN;
set_param(stepper_index, L6470_KVAL_HOLD, kval_hold); // reduce KVAL_HOLD
p += sprintf_P(p, PSTR(" - KVAL_HOLD reduced by %d to %d"), KVAL_HOLD_STEP_DOWN, kval_hold); // let user know
driver_L6470_data[j].otw_counter = 0;
driver_L6470_data[j].is_otw = true;
}
else if (driver_L6470_data[j].otw_counter)
p += sprintf_P(p, PSTR("%c- thermal warning"), ' '); // warn user
}
}
#ifdef L6470_STOP_ON_ERROR
if (_status & (STATUS_UVLO | STATUS_TH_WRN | STATUS_TH_SD))
kill(temp_buf);
#endif
#if ENABLED(L6470_CHITCHAT)
if (_status & STATUS_OCD)
p += sprintf_P(p, PSTR("%c over current"), ' ');
if (_status & (STATUS_STEP_LOSS_A | STATUS_STEP_LOSS_B))
p += sprintf_P(p, PSTR("%c stall"), ' ');
if (_status & STATUS_UVLO)
p += sprintf_P(p, PSTR("%c under voltage lock out"), ' ');
p += sprintf_P(p, PSTR("%c\n"), ' ');
#endif
DEBUG_ECHOLN(temp_buf); // print the error message
}
else {
driver_L6470_data[j].is_ot = false;
driver_L6470_data[j].otw_counter = 0; //clear out warning indicators
driver_L6470_data[j].is_otw = false;
} // end usual checks
} // comms established but have errors
} // comms re-established
} // end L6470_monitor_update()
#define MONITOR_L6470_DRIVE(Q) L6470_monitor_update(Q, stepper##Q.getStatus())
void L6470_Marlin::monitor_driver() {
static millis_t next_cOT = 0;
if (ELAPSED(millis(), next_cOT)) {
next_cOT = millis() + 500;
spi_active = true; // let set_directions() know we're in the middle of a series of SPI transfers
#if AXIS_DRIVER_TYPE_X(L6470)
MONITOR_L6470_DRIVE(X);
#endif
#if AXIS_DRIVER_TYPE_Y(L6470)
MONITOR_L6470_DRIVE(Y);
#endif
#if AXIS_DRIVER_TYPE_Z(L6470)
MONITOR_L6470_DRIVE(Z);
#endif
#if AXIS_DRIVER_TYPE_X2(L6470)
MONITOR_L6470_DRIVE(X2);
#endif
#if AXIS_DRIVER_TYPE_Y2(L6470)
MONITOR_L6470_DRIVE(Y2);
#endif
#if AXIS_DRIVER_TYPE_Z2(L6470)
MONITOR_L6470_DRIVE(Z2);
#endif
#if AXIS_DRIVER_TYPE_Z3(L6470)
MONITOR_L6470_DRIVE(Z3);
#endif
#if AXIS_DRIVER_TYPE_E0(L6470)
MONITOR_L6470_DRIVE(E0);
#endif
#if AXIS_DRIVER_TYPE_E1(L6470)
MONITOR_L6470_DRIVE(E1);
#endif
#if AXIS_DRIVER_TYPE_E2(L6470)
MONITOR_L6470_DRIVE(E2);
#endif
#if AXIS_DRIVER_TYPE_E3(L6470)
MONITOR_L6470_DRIVE(E3);
#endif
#if AXIS_DRIVER_TYPE_E4(L6470)
MONITOR_L6470_DRIVE(E4);
#endif
#if AXIS_DRIVER_TYPE_E5(L6470)
MONITOR_L6470_DRIVE(E5);
#endif
#if ENABLED(L6470_DEBUG)
if (report_L6470_status) L6470_EOL();
#endif
spi_active = false; // done with all SPI transfers - clear handshake flags
spi_abort = false;
}
}
#endif // MONITOR_L6470_DRIVER_STATUS
#endif // HAS_DRIVER(L6470)