/** * Marlin 3D Printer Firmware * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ /** * Software SPI functions originally from Arduino Sd2Card Library * Copyright (c) 2009 by William Greiman * * Completely rewritten and tuned by Eduardo José Tagle in 2017/2018 * in ARM thumb2 inline assembler and tuned for maximum speed and performance * allowing SPI clocks of up to 12 Mhz to increase SD card read/write performance */ /** * Description: HAL for Arduino Due and compatible (SAM3X8E) * * For ARDUINO_ARCH_SAM */ #ifdef ARDUINO_ARCH_SAM #include "../../inc/MarlinConfig.h" #include "../shared/Delay.h" // ------------------------ // Public functions // ------------------------ #if EITHER(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI) // ------------------------ // Software SPI // ------------------------ // Make sure GCC optimizes this file. // Note that this line triggers a bug in GCC which is fixed by casting. // See the note below. #pragma GCC optimize (3) typedef uint8_t (*pfnSpiTransfer)(uint8_t b); typedef void (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte); typedef void (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte); /* ---------------- Macros to be able to access definitions from asm */ #define _PORT(IO) DIO ## IO ## _WPORT #define _PIN_MASK(IO) MASK(DIO ## IO ## _PIN) #define _PIN_SHIFT(IO) DIO ## IO ## _PIN #define PORT(IO) _PORT(IO) #define PIN_MASK(IO) _PIN_MASK(IO) #define PIN_SHIFT(IO) _PIN_SHIFT(IO) // run at ~8 .. ~10Mhz - Tx version (Rx data discarded) static uint8_t spiTransferTx0(uint8_t bout) { // using Mode 0 uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30; /* SODR of port */ uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN); uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_MASK = PIN_MASK(SCK_PIN); uint32_t idx = 0; /* Negate bout, as the assembler requires a negated value */ bout = ~bout; /* The software SPI routine */ __asm__ __volatile__( A(".syntax unified") // is to prevent CM0,CM1 non-unified syntax /* Bit 7 */ A("ubfx %[idx],%[txval],#7,#1") /* Place bit 7 in bit 0 of idx*/ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#6,#1") /* Place bit 6 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 6 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#5,#1") /* Place bit 5 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 5 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#4,#1") /* Place bit 4 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 4 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#3,#1") /* Place bit 3 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 3 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#2,#1") /* Place bit 2 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 2 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#1,#1") /* Place bit 1 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 1 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[idx],%[txval],#0,#1") /* Place bit 0 in bit 0 of idx*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 0 */ A("str %[mosi_mask],[%[mosi_port], %[idx],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("nop") /* Result will be 0 */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ : [idx]"+r"( idx ) : [txval]"r"( bout ) , [mosi_mask]"r"( MOSI_MASK ), [mosi_port]"r"( MOSI_PORT_PLUS30 ), [sck_mask]"r"( SCK_MASK ), [sck_port]"r"( SCK_PORT_PLUS30 ) : "cc" ); return 0; } // Calculates the bit band alias address and returns a pointer address to word. // addr: The byte address of bitbanding bit. // bit: The bit position of bitbanding bit. #define BITBAND_ADDRESS(addr, bit) \ (((uint32_t)(addr) & 0xF0000000) + 0x02000000 + ((uint32_t)(addr)&0xFFFFF)*32 + (bit)*4) // run at ~8 .. ~10Mhz - Rx version (Tx line not altered) static uint8_t spiTransferRx0(uint8_t bout) { // using Mode 0 uint32_t bin = 0; uint32_t work = 0; uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN)); /* PDSR of port in bitband area */ uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_MASK = PIN_MASK(SCK_PIN); UNUSED(bout); /* The software SPI routine */ __asm__ __volatile__( A(".syntax unified") // is to prevent CM0,CM1 non-unified syntax /* bit 7 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#7,#1") /* Store read bit as the bit 7 */ /* bit 6 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#6,#1") /* Store read bit as the bit 6 */ /* bit 5 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#5,#1") /* Store read bit as the bit 5 */ /* bit 4 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#4,#1") /* Store read bit as the bit 4 */ /* bit 3 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#3,#1") /* Store read bit as the bit 3 */ /* bit 2 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#2,#1") /* Store read bit as the bit 2 */ /* bit 1 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#1,#1") /* Store read bit as the bit 1 */ /* bit 0 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#0,#1") /* Store read bit as the bit 0 */ : [bin]"+r"(bin), [work]"+r"(work) : [bitband_miso_port]"r"( BITBAND_MISO_PORT ), [sck_mask]"r"( SCK_MASK ), [sck_port]"r"( SCK_PORT_PLUS30 ) : "cc" ); return bin; } // run at ~4Mhz static uint8_t spiTransfer1(uint8_t b) { // using Mode 0 int bits = 8; do { WRITE(MOSI_PIN, b & 0x80); b <<= 1; // little setup time WRITE(SCK_PIN, HIGH); DELAY_NS(125); // 10 cycles @ 84mhz b |= (READ(MISO_PIN) != 0); WRITE(SCK_PIN, LOW); DELAY_NS(125); // 10 cycles @ 84mhz } while (--bits); return b; } // all the others static uint32_t spiDelayCyclesX4 = (F_CPU) / 1000000; // 4uS => 125khz static uint8_t spiTransferX(uint8_t b) { // using Mode 0 int bits = 8; do { WRITE(MOSI_PIN, b & 0x80); b <<= 1; // little setup time WRITE(SCK_PIN, HIGH); __delay_4cycles(spiDelayCyclesX4); b |= (READ(MISO_PIN) != 0); WRITE(SCK_PIN, LOW); __delay_4cycles(spiDelayCyclesX4); } while (--bits); return b; } // Pointers to generic functions for byte transfers /** * Note: The cast is unnecessary, but without it, this file triggers a GCC 4.8.3-2014 bug. * Later GCC versions do not have this problem, but at this time (May 2018) Arduino still * uses that buggy and obsolete GCC version!! */ static pfnSpiTransfer spiTransferRx = (pfnSpiTransfer)spiTransferX; static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX; // Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded) static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) { uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(MOSI_PIN)) + 0x30; /* SODR of port */ uint32_t MOSI_MASK = PIN_MASK(MOSI_PIN); uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_MASK = PIN_MASK(SCK_PIN); uint32_t work = 0; uint32_t txval = 0; /* The software SPI routine */ __asm__ __volatile__( A(".syntax unified") // is to prevent CM0,CM1 non-unified syntax L("loop%=") A("ldrb.w %[txval], [%[ptr]], #1") /* Load value to send, increment buffer */ A("mvn %[txval],%[txval]") /* Negate value */ /* Bit 7 */ A("ubfx %[work],%[txval],#7,#1") /* Place bit 7 in bit 0 of work*/ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#6,#1") /* Place bit 6 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 6 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#5,#1") /* Place bit 5 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 5 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#4,#1") /* Place bit 4 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 4 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#3,#1") /* Place bit 3 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 3 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#2,#1") /* Place bit 2 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 2 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#1,#1") /* Place bit 1 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 1 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ubfx %[work],%[txval],#0,#1") /* Place bit 0 in bit 0 of work*/ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ /* Bit 0 */ A("str %[mosi_mask],[%[mosi_port], %[work],LSL #2]") /* Access the proper SODR or CODR registers based on that bit */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("subs %[todo],#1") /* Decrement count of pending words to send, update status */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bne.n loop%=") /* Repeat until done */ : [ptr]"+r" ( ptr ) , [todo]"+r" ( todo ) , [work]"+r"( work ) , [txval]"+r"( txval ) : [mosi_mask]"r"( MOSI_MASK ), [mosi_port]"r"( MOSI_PORT_PLUS30 ), [sck_mask]"r"( SCK_MASK ), [sck_port]"r"( SCK_PORT_PLUS30 ) : "cc" ); } static void spiRxBlock0(uint8_t* ptr, uint32_t todo) { uint32_t bin = 0; uint32_t work = 0; uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(MISO_PIN))+0x3C, PIN_SHIFT(MISO_PIN)); /* PDSR of port in bitband area */ uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SCK_PIN)) + 0x30; /* SODR of port */ uint32_t SCK_MASK = PIN_MASK(SCK_PIN); /* The software SPI routine */ __asm__ __volatile__( A(".syntax unified") // is to prevent CM0,CM1 non-unified syntax L("loop%=") /* bit 7 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#7,#1") /* Store read bit as the bit 7 */ /* bit 6 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#6,#1") /* Store read bit as the bit 6 */ /* bit 5 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#5,#1") /* Store read bit as the bit 5 */ /* bit 4 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#4,#1") /* Store read bit as the bit 4 */ /* bit 3 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#3,#1") /* Store read bit as the bit 3 */ /* bit 2 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#2,#1") /* Store read bit as the bit 2 */ /* bit 1 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#1,#1") /* Store read bit as the bit 1 */ /* bit 0 */ A("str %[sck_mask],[%[sck_port]]") /* SODR */ A("ldr %[work],[%[bitband_miso_port]]") /* PDSR on bitband area for required bit: work will be 1 or 0 based on port */ A("str %[sck_mask],[%[sck_port],#0x4]") /* CODR */ A("bfi %[bin],%[work],#0,#1") /* Store read bit as the bit 0 */ A("subs %[todo],#1") /* Decrement count of pending words to send, update status */ A("strb.w %[bin], [%[ptr]], #1") /* Store read value into buffer, increment buffer pointer */ A("bne.n loop%=") /* Repeat until done */ : [ptr]"+r"(ptr), [todo]"+r"(todo), [bin]"+r"(bin), [work]"+r"(work) : [bitband_miso_port]"r"( BITBAND_MISO_PORT ), [sck_mask]"r"( SCK_MASK ), [sck_port]"r"( SCK_PORT_PLUS30 ) : "cc" ); } static void spiTxBlockX(const uint8_t* buf, uint32_t todo) { do { (void) spiTransferTx(*buf++); } while (--todo); } static void spiRxBlockX(uint8_t* buf, uint32_t todo) { do { *buf++ = spiTransferRx(0xFF); } while (--todo); } // Pointers to generic functions for block tranfers static pfnSpiTxBlock spiTxBlock = (pfnSpiTxBlock)spiTxBlockX; static pfnSpiRxBlock spiRxBlock = (pfnSpiRxBlock)spiRxBlockX; #if MB(ALLIGATOR) #define _SS_WRITE(S) WRITE(SS_PIN, S) #else #define _SS_WRITE(S) NOOP #endif void spiBegin() { SET_OUTPUT(SS_PIN); _SS_WRITE(HIGH); SET_OUTPUT(SCK_PIN); SET_INPUT(MISO_PIN); SET_OUTPUT(MOSI_PIN); } uint8_t spiRec() { _SS_WRITE(LOW); WRITE(MOSI_PIN, HIGH); // Output 1s 1 uint8_t b = spiTransferRx(0xFF); _SS_WRITE(HIGH); return b; } void spiRead(uint8_t* buf, uint16_t nbyte) { if (nbyte) { _SS_WRITE(LOW); WRITE(MOSI_PIN, HIGH); // Output 1s 1 spiRxBlock(buf, nbyte); _SS_WRITE(HIGH); } } void spiSend(uint8_t b) { _SS_WRITE(LOW); (void)spiTransferTx(b); _SS_WRITE(HIGH); } void spiSendBlock(uint8_t token, const uint8_t* buf) { _SS_WRITE(LOW); (void)spiTransferTx(token); spiTxBlock(buf, 512); _SS_WRITE(HIGH); } /** * spiRate should be * 0 : 8 - 10 MHz * 1 : 4 - 5 MHz * 2 : 2 - 2.5 MHz * 3 : 1 - 1.25 MHz * 4 : 500 - 625 kHz * 5 : 250 - 312 kHz * 6 : 125 - 156 kHz */ void spiInit(uint8_t spiRate) { switch (spiRate) { case 0: spiTransferTx = (pfnSpiTransfer)spiTransferTx0; spiTransferRx = (pfnSpiTransfer)spiTransferRx0; spiTxBlock = (pfnSpiTxBlock)spiTxBlock0; spiRxBlock = (pfnSpiRxBlock)spiRxBlock0; break; case 1: spiTransferTx = (pfnSpiTransfer)spiTransfer1; spiTransferRx = (pfnSpiTransfer)spiTransfer1; spiTxBlock = (pfnSpiTxBlock)spiTxBlockX; spiRxBlock = (pfnSpiRxBlock)spiRxBlockX; break; default: spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate); spiTransferTx = (pfnSpiTransfer)spiTransferX; spiTransferRx = (pfnSpiTransfer)spiTransferX; spiTxBlock = (pfnSpiTxBlock)spiTxBlockX; spiRxBlock = (pfnSpiRxBlock)spiRxBlockX; break; } _SS_WRITE(HIGH); WRITE(MOSI_PIN, HIGH); WRITE(SCK_PIN, LOW); } /** Begin SPI transaction, set clock, bit order, data mode */ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { // TODO: to be implemented } #pragma GCC reset_options #else // !SOFTWARE_SPI #define WHILE_TX(N) while ((SPI0->SPI_SR & SPI_SR_TDRE) == (N)) #define WHILE_RX(N) while ((SPI0->SPI_SR & SPI_SR_RDRF) == (N)) #define FLUSH_TX() do{ WHILE_RX(1) SPI0->SPI_RDR; }while(0) #if MB(ALLIGATOR) // slave selects controlled by SPI controller // doesn't support changing SPI speeds for SD card // ------------------------ // hardware SPI // ------------------------ static bool spiInitialized = false; void spiInit(uint8_t spiRate) { if (spiInitialized) return; // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz constexpr int spiDivider[] = { 10, 21, 42, 84, 168, 255, 255 }; if (spiRate > 6) spiRate = 1; // Set SPI mode 1, clock, select not active after transfer, with delay between transfers SPI_ConfigureNPCS(SPI0, SPI_CHAN_DAC, SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_DLYBCT(1)); // Set SPI mode 0, clock, select not active after transfer, with delay between transfers SPI_ConfigureNPCS(SPI0, SPI_CHAN_EEPROM1, SPI_CSR_NCPHA | SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_DLYBCT(1)); // Set SPI mode 0, clock, select not active after transfer, with delay between transfers SPI_ConfigureNPCS(SPI0, SPI_CHAN, SPI_CSR_NCPHA | SPI_CSR_CSAAT | SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_DLYBCT(1)); SPI_Enable(SPI0); spiInitialized = true; } void spiBegin() { if (spiInitialized) return; // Configure SPI pins PIO_Configure( g_APinDescription[SCK_PIN].pPort, g_APinDescription[SCK_PIN].ulPinType, g_APinDescription[SCK_PIN].ulPin, g_APinDescription[SCK_PIN].ulPinConfiguration); PIO_Configure( g_APinDescription[MOSI_PIN].pPort, g_APinDescription[MOSI_PIN].ulPinType, g_APinDescription[MOSI_PIN].ulPin, g_APinDescription[MOSI_PIN].ulPinConfiguration); PIO_Configure( g_APinDescription[MISO_PIN].pPort, g_APinDescription[MISO_PIN].ulPinType, g_APinDescription[MISO_PIN].ulPin, g_APinDescription[MISO_PIN].ulPinConfiguration); // set master mode, peripheral select, fault detection SPI_Configure(SPI0, ID_SPI0, SPI_MR_MSTR | SPI_MR_MODFDIS | SPI_MR_PS); SPI_Enable(SPI0); SET_OUTPUT(DAC0_SYNC); #if EXTRUDERS > 1 SET_OUTPUT(DAC1_SYNC); WRITE(DAC1_SYNC, HIGH); #endif SET_OUTPUT(SPI_EEPROM1_CS); SET_OUTPUT(SPI_EEPROM2_CS); SET_OUTPUT(SPI_FLASH_CS); WRITE(DAC0_SYNC, HIGH); WRITE(SPI_EEPROM1_CS, HIGH); WRITE(SPI_EEPROM2_CS, HIGH); WRITE(SPI_FLASH_CS, HIGH); WRITE(SS_PIN, HIGH); OUT_WRITE(SDSS, LOW); PIO_Configure( g_APinDescription[SPI_PIN].pPort, g_APinDescription[SPI_PIN].ulPinType, g_APinDescription[SPI_PIN].ulPin, g_APinDescription[SPI_PIN].ulPinConfiguration ); spiInit(1); } // Read single byte from SPI uint8_t spiRec() { // write dummy byte with address and end transmission flag SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER; WHILE_TX(0); WHILE_RX(0); //DELAY_US(1U); return SPI0->SPI_RDR; } uint8_t spiRec(uint32_t chan) { WHILE_TX(0); FLUSH_RX(); // write dummy byte with address and end transmission flag SPI0->SPI_TDR = 0x000000FF | SPI_PCS(chan) | SPI_TDR_LASTXFER; WHILE_RX(0); return SPI0->SPI_RDR; } // Read from SPI into buffer void spiRead(uint8_t* buf, uint16_t nbyte) { if (!nbyte) return; --nbyte; for (int i = 0; i < nbyte; i++) { //WHILE_TX(0); SPI0->SPI_TDR = 0x000000FF | SPI_PCS(SPI_CHAN); WHILE_RX(0); buf[i] = SPI0->SPI_RDR; //DELAY_US(1U); } buf[nbyte] = spiRec(); } // Write single byte to SPI void spiSend(const byte b) { // write byte with address and end transmission flag SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(SPI_CHAN) | SPI_TDR_LASTXFER; WHILE_TX(0); WHILE_RX(0); SPI0->SPI_RDR; //DELAY_US(1U); } void spiSend(const uint8_t* buf, size_t nbyte) { if (!nbyte) return; --nbyte; for (size_t i = 0; i < nbyte; i++) { SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN); WHILE_TX(0); WHILE_RX(0); SPI0->SPI_RDR; //DELAY_US(1U); } spiSend(buf[nbyte]); } void spiSend(uint32_t chan, byte b) { WHILE_TX(0); // write byte with address and end transmission flag SPI0->SPI_TDR = (uint32_t)b | SPI_PCS(chan) | SPI_TDR_LASTXFER; WHILE_RX(0); FLUSH_RX(); } void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) { if (!nbyte) return; --nbyte; for (size_t i = 0; i < nbyte; i++) { WHILE_TX(0); SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(chan); WHILE_RX(0); FLUSH_RX(); } spiSend(chan, buf[nbyte]); } // Write from buffer to SPI void spiSendBlock(uint8_t token, const uint8_t* buf) { SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN); WHILE_TX(0); //WHILE_RX(0); //SPI0->SPI_RDR; for (int i = 0; i < 511; i++) { SPI0->SPI_TDR = (uint32_t)buf[i] | SPI_PCS(SPI_CHAN); WHILE_TX(0); WHILE_RX(0); SPI0->SPI_RDR; //DELAY_US(1U); } spiSend(buf[511]); } /** Begin SPI transaction, set clock, bit order, data mode */ void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) { // TODO: to be implemented } #else // U8G compatible hardware SPI #define SPI_MODE_0_DUE_HW 2 // DUE CPHA control bit is inverted #define SPI_MODE_1_DUE_HW 3 #define SPI_MODE_2_DUE_HW 0 #define SPI_MODE_3_DUE_HW 1 /** * The DUE SPI controller is set up so the upper word of the longword * written to the transmit data register selects which SPI Chip Select * Register is used. This allows different streams to have different SPI * settings. * * In practice it's spooky. Some combinations hang the system, while others * upset the peripheral device. * * SPI mode should be the same for all streams. The FYSETC_MINI_12864 gets * upset if the clock phase changes after chip select goes active. * * SPI_CSR_CSAAT should be set for all streams. If not the WHILE_TX(0) * macro returns immediately which can result in the SPI chip select going * inactive before all the data has been sent. * * The TMC2130 library uses SPI0->SPI_CSR[3]. * * The U8G hardware SPI uses SPI0->SPI_CSR[0]. The system hangs and/or the * FYSETC_MINI_12864 gets upset if lower baud rates are used and the SD card * is inserted or removed. * * The SD card uses SPI0->SPI_CSR[3]. Efforts were made to use [1] and [2] * but they all resulted in hangs or garbage on the LCD. * * The SPI controlled chip selects are NOT enabled in the GPIO controller. * The application must control the chip select. * * All of the above can be avoided by defining FORCE_SOFT_SPI to force the * display to use software SPI. * */ void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified) // Also sets U8G SPI rate to 4MHz and the SPI mode to 3 // 8.4 MHz, 4 MHz, 2 MHz, 1 MHz, 0.5 MHz, 0.329 MHz, 0.329 MHz constexpr int spiDivider[] = { 10, 21, 42, 84, 168, 255, 255 }; if (spiRate > 6) spiRate = 1; // Enable PIOA and SPI0 REG_PMC_PCER0 = (1UL << ID_PIOA) | (1UL << ID_SPI0); // Disable PIO on A26 and A27 REG_PIOA_PDR = 0x0C000000; OUT_WRITE(SDSS, HIGH); // Reset SPI0 (from sam lib) SPI0->SPI_CR = SPI_CR_SPIDIS; SPI0->SPI_CR = SPI_CR_SWRST; SPI0->SPI_CR = SPI_CR_SWRST; SPI0->SPI_CR = SPI_CR_SPIEN; // TMC2103 compatible setup // Master mode, no fault detection, PCS bits in data written to TDR select CSR register SPI0->SPI_MR = SPI_MR_MSTR | SPI_MR_PS | SPI_MR_MODFDIS; // SPI mode 3, 8 Bit data transfer, baud rate SPI0->SPI_CSR[3] = SPI_CSR_SCBR(spiDivider[spiRate]) | SPI_CSR_CSAAT | SPI_MODE_3_DUE_HW; // use same CSR as TMC2130 SPI0->SPI_CSR[0] = SPI_CSR_SCBR(spiDivider[1]) | SPI_CSR_CSAAT | SPI_MODE_3_DUE_HW; // U8G default to 4MHz } void spiBegin() { spiInit(); } static uint8_t spiTransfer(uint8_t data) { WHILE_TX(0); SPI0->SPI_TDR = (uint32_t)data | 0x00070000UL; // Add TMC2130 PCS bits to every byte (use SPI0->SPI_CSR[3]) WHILE_TX(0); WHILE_RX(0); return SPI0->SPI_RDR; } uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); } void spiRead(uint8_t* buf, uint16_t nbyte) { for (int i = 0; i < nbyte; i++) buf[i] = spiTransfer(0xFF); } void spiSend(uint8_t data) { spiTransfer(data); } void spiSend(const uint8_t* buf, size_t nbyte) { for (uint16_t i = 0; i < nbyte; i++) spiTransfer(buf[i]); } void spiSendBlock(uint8_t token, const uint8_t* buf) { spiTransfer(token); for (uint16_t i = 0; i < 512; i++) spiTransfer(buf[i]); } #endif // !ALLIGATOR #endif // !SOFTWARE_SPI #endif // ARDUINO_ARCH_SAM