/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Croatian (Hrvatski) * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. #define CHARSIZE 2 #define WELCOME_MSG MACHINE_NAME _UxGT(" spreman.") #define MSG_SD_INSERTED _UxGT("SD kartica umetnuta") #define MSG_SD_REMOVED _UxGT("SD kartica uklonjena") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Main") #define MSG_AUTOSTART _UxGT("Auto pokretanje") #define MSG_DISABLE_STEPPERS _UxGT("Ugasi steppere") #define MSG_AUTO_HOME _UxGT("Automatski homing") #define MSG_AUTO_HOME_X _UxGT("Home-aj X") #define MSG_AUTO_HOME_Y _UxGT("Home-aj Y") #define MSG_AUTO_HOME_Z _UxGT("Home-aj Z") #define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriraj Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home-aj XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klikni za početak") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sljedeća točka") #define MSG_LEVEL_BED_DONE _UxGT("Niveliranje gotovo!") #define MSG_SET_HOME_OFFSETS _UxGT("Postavi home offsete") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Offsets postavljeni") #define MSG_SET_ORIGIN _UxGT("Postavi ishodište") #define MSG_PREHEAT_1 _UxGT("Predgrij " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Sve") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Bed") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" conf") #define MSG_PREHEAT_2 _UxGT("Predgrij " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Sve") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Bed") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" conf") #define MSG_COOLDOWN _UxGT("Hlađenje") #define MSG_SWITCH_PS_ON _UxGT("Uključi napajanje") #define MSG_SWITCH_PS_OFF _UxGT("Isključi napajanje") #define MSG_EXTRUDE _UxGT("Extrude") #define MSG_RETRACT _UxGT("Retract") #define MSG_MOVE_AXIS _UxGT("Miči os") #define MSG_BED_LEVELING _UxGT("Niveliraj bed") #define MSG_LEVEL_BED _UxGT("Niveliraj bed") #define MSG_MOVE_X _UxGT("Miči X") #define MSG_MOVE_Y _UxGT("Miči Y") #define MSG_MOVE_Z _UxGT("Miči Z") #define MSG_MOVE_E _UxGT("Extruder") #define MSG_MOVE_01MM _UxGT("Miči 0.1mm") #define MSG_MOVE_1MM _UxGT("Miči 1mm") #define MSG_MOVE_10MM _UxGT("Miči 10mm") #define MSG_SPEED _UxGT("Brzina") #define MSG_BED_Z _UxGT("Bed Z") #define MSG_NOZZLE _UxGT("Dizna") #define MSG_BED _UxGT("Bed") #define MSG_FAN_SPEED _UxGT("Brzina ventilatora") #define MSG_FLOW _UxGT("Flow") #define MSG_CONTROL _UxGT("Control") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") #define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") #define MSG_AUTOTEMP _UxGT("Autotemp") #define MSG_LCD_ON _UxGT("On") #define MSG_LCD_OFF _UxGT("Off") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Odaberi") #define MSG_ACC _UxGT("Accel") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("Va-jerk") #define MSG_VB_JERK _UxGT("Vb-jerk") #define MSG_VC_JERK _UxGT("Vc-jerk") #else #define MSG_VA_JERK _UxGT("Vx-jerk") #define MSG_VB_JERK _UxGT("Vy-jerk") #define MSG_VC_JERK _UxGT("Vz-jerk") #endif #define MSG_VE_JERK _UxGT("Ve-jerk") #define MSG_VMAX _UxGT("Vmax ") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("VTrav min") #define MSG_AMAX _UxGT("Amax ") #define MSG_A_RETRACT _UxGT("A-retract") #define MSG_A_TRAVEL _UxGT("A-travel") #define MSG_STEPS_PER_MM _UxGT("Steps/mm") #if IS_KINEMATIC #define MSG_ASTEPS _UxGT("Asteps/mm") #define MSG_BSTEPS _UxGT("Bsteps/mm") #define MSG_CSTEPS _UxGT("Csteps/mm") #else #define MSG_ASTEPS _UxGT("Xsteps/mm") #define MSG_BSTEPS _UxGT("Ysteps/mm") #define MSG_CSTEPS _UxGT("Zsteps/mm") #endif #define MSG_ESTEPS _UxGT("Esteps/mm") #define MSG_E1STEPS _UxGT("E1steps/mm") #define MSG_E2STEPS _UxGT("E2steps/mm") #define MSG_E3STEPS _UxGT("E3steps/mm") #define MSG_E4STEPS _UxGT("E4steps/mm") #define MSG_E5STEPS _UxGT("E5steps/mm") #define MSG_E6STEPS _UxGT("E6steps/mm") #define MSG_TEMPERATURE _UxGT("Temperature") #define MSG_MOTION _UxGT("Gibanje") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("Kontrast LCD-a") #define MSG_STORE_EEPROM _UxGT("Pohrani u memoriju") #define MSG_LOAD_EEPROM _UxGT("Učitaj memoriju") #define MSG_RESTORE_FAILSAFE _UxGT("Učitaj failsafe") #define MSG_REFRESH _UxGT("Osvježi") #define MSG_WATCH _UxGT("Info screen") #define MSG_PREPARE _UxGT("Pripremi") #define MSG_TUNE _UxGT("Tune") #define MSG_PAUSE_PRINT _UxGT("Pauziraj print") #define MSG_RESUME_PRINT _UxGT("Nastavi print") #define MSG_STOP_PRINT _UxGT("Zaustavi print") #define MSG_CARD_MENU _UxGT("Printaj s SD kartice") #define MSG_NO_CARD _UxGT("Nema SD kartice") #define MSG_DWELL _UxGT("Sleep...") #define MSG_USERWAIT _UxGT("Čekaj korisnika...") #define MSG_PRINT_ABORTED _UxGT("Print otkazan") #define MSG_NO_MOVE _UxGT("No move.") #define MSG_KILLED _UxGT("KILLED. ") #define MSG_STOPPED _UxGT("ZAUSTAVLJEN. ") #define MSG_CONTROL_RETRACT _UxGT("Retract mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Re.mm") #define MSG_CONTROL_RETRACTF _UxGT("Retract V") #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Hop mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("UnRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("S UnRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("UnRet V") #define MSG_AUTORETRACT _UxGT("AutoRetr.") #define MSG_FILAMENTCHANGE _UxGT("Promijeni filament") #define MSG_INIT_SDCARD _UxGT("Init. SD karticu") #define MSG_CHANGE_SDCARD _UxGT("Promijeni SD karticu") #define MSG_ZPROBE_OUT _UxGT("Z probe out. bed") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Self-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("first") #define MSG_ZPROBE_ZOFFSET _UxGT("Z Offset") #define MSG_BABYSTEP_X _UxGT("Babystep X") #define MSG_BABYSTEP_Y _UxGT("Babystep Y") #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_HEATING_FAILED_LCD _UxGT("Grijanje neuspješno") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Err: REDUNDANT TEMP") #define MSG_THERMAL_RUNAWAY _UxGT("THERMAL RUNAWAY") #define MSG_ERR_MAXTEMP _UxGT("Err: MAXTEMP") #define MSG_ERR_MINTEMP _UxGT("Err: MINTEMP") #define MSG_ERR_MAXTEMP_BED _UxGT("Err: MAXTEMP BED") #define MSG_ERR_MINTEMP_BED _UxGT("Err: MINTEMP BED") #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_HALTED _UxGT("PRINTER HALTED") #define MSG_PLEASE_RESET _UxGT("Please reset") #define MSG_SHORT_DAY _UxGT("d") // One character only #define MSG_SHORT_HOUR _UxGT("h") // One character only #define MSG_SHORT_MINUTE _UxGT("m") // One character only #define MSG_HEATING _UxGT("Grijanje...") #define MSG_BED_HEATING _UxGT("Grijanje Bed-a...") #define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibracija") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibriraj X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibriraj Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Kalibriraj Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Kalibriraj Središte") #define MSG_INFO_MENU _UxGT("O printeru") #define MSG_INFO_PRINTER_MENU _UxGT("Podaci o printeru") #define MSG_INFO_STATS_MENU _UxGT("Statistika printera") #define MSG_INFO_BOARD_MENU _UxGT("Podaci o elektronici") #define MSG_INFO_THERMISTOR_MENU _UxGT("Termistori") #define MSG_INFO_EXTRUDERS _UxGT("Extruderi") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protokol") #define MSG_CASE_LIGHT _UxGT("Osvjetljenje") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Broj printova") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni") #define MSG_INFO_PRINT_TIME _UxGT("Ukupno printanja") #define MSG_INFO_PRINT_LONGEST _UxGT("Najduži print") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano ukupno") #else #define MSG_INFO_PRINT_COUNT _UxGT("Printovi") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Završeni") #define MSG_INFO_PRINT_TIME _UxGT("Ukupno") #define MSG_INFO_PRINT_LONGEST _UxGT("Najduži") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrudirano") #endif #define MSG_INFO_MIN_TEMP _UxGT("Min Temp") #define MSG_INFO_MAX_TEMP _UxGT("Max Temp") #define MSG_INFO_PSU _UxGT("Napajanje") #define MSG_DRIVE_STRENGTH _UxGT("Drive Strength") #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM Write") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Nastavi print") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekaj početak") #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("filamenta") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("promijeni") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekaj") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("filament unload") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Umetni filament") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("i pritisni tipku") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("za nastavak...") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Pričekaj") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("filament load") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Wait for print") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("to resume") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Pričekaj...") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Ejecting...") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Loading...") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Nastavljam...") #endif // LCD_HEIGHT < 4