/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #if !defined(__STM32F1__) && !defined(__STM32F4__) #error "Oops! Select an STM32F1/4 board in 'Tools > Board.'" #endif /** * 2017 Victor Perez Marlin for stm32f1 test */ #define BOARD_INFO_NAME "Chitu3D V5" #define DEFAULT_MACHINE_NAME "STM32F103ZET6" #define DISABLE_JTAG // // EEPROM // #define FLASH_EEPROM_EMULATION #if ENABLED(FLASH_EEPROM_EMULATION) // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE #else #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM #endif // // Limit Switches // #define X_STOP_PIN PG10 #define Y_STOP_PIN PA12 #define Z_STOP_PIN PA14 // // Steppers // #define X_ENABLE_PIN PC13 #define X_STEP_PIN PE5 #define X_DIR_PIN PE6 #define Y_ENABLE_PIN PE4 #define Y_STEP_PIN PE2 #define Y_DIR_PIN PE3 #define Z_ENABLE_PIN PE1 #define Z_STEP_PIN PB9 #define Z_DIR_PIN PE0 #define E0_ENABLE_PIN PB8 #define E0_STEP_PIN PB4 #define E0_DIR_PIN PB5 #define E1_ENABLE_PIN PG8 #define E1_STEP_PIN PC7 #define E1_DIR_PIN PC6 // // Temperature Sensors // #define TEMP_0_PIN PA1 // TH1 #define TEMP_BED_PIN PA0 // TB1 // // Heaters // #define HEATER_0_PIN PG12 // HEATER1 #define HEATER_BED_PIN PG11 // HOT BED // // Fans // #define CONTROLLER_FAN_PIN PD6 // BOARD FAN #define FAN_PIN PG13 // FAN #define FAN_PIN_2 PG14 // // Misc // #define BEEPER_PIN PB0 //#define LED_PIN -1 //#define POWER_LOSS_PIN -1 #define FIL_RUNOUT_PIN PA15 // // TronXY TFT Support // //#define FSMC_GRAPHICAL_TFT //#define TOUCH_BUTTONS #if ENABLED(FSMC_GRAPHICAL_TFT) #define FSMC_UPSCALE 3 #define LCD_FULL_PIXEL_WIDTH 480 #define LCD_PIXEL_OFFSET_X 48 #define LCD_FULL_PIXEL_HEIGHT 320 #define LCD_PIXEL_OFFSET_Y 48 #define LCD_RESET_PIN PF11 #define LCD_BACKLIGHT_PIN PD13 #define FSMC_CS_PIN PD7 #define FSMC_RS_PIN PD11 #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 #if ENABLED(TOUCH_BUTTONS) #define TOUCH_CS_PIN PB7 // SPI1_NSS #define TOUCH_SCK_PIN PA5 // SPI1_SCK #define TOUCH_MISO_PIN PA6 // SPI1_MISO #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI #define BUTTON_DELAY_EDIT 50 // (ms) Button repeat delay for edit screens #define BUTTON_DELAY_MENU 250 // (ms) Button repeat delay for menus #define XPT2046_X_CALIBRATION -12316 #define XPT2046_Y_CALIBRATION 8981 #define XPT2046_X_OFFSET 340 #define XPT2046_Y_OFFSET -20 #endif #endif #define SPI_FLASH_SIZE 0x200000 // 2MB #if HAS_TFT_LVGL_UI #define HAS_SPI_FLASH_FONT 0 #define HAS_GCODE_PREVIEW 1 #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 #define HAS_LANG_SELECT_SCREEN 0 #define HAS_BAK_VIEW_IN_FLASH 0 #define HAS_LOGO_IN_FLASH 0 //SPI 2 #define W25QXX_CS_PIN PB12 #define W25QXX_MOSI_PIN PB15 #define W25QXX_MISO_PIN PB14 #define W25QXX_SCK_PIN PB13 #define TOUCH_CS_PIN PB7 // SPI1_NSS #define TOUCH_SCK_PIN PA5 // SPI1_SCK #define TOUCH_MISO_PIN PA6 // SPI1_MISO #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI // #define TOUCH_INT_PIN PB6 #define SPI_TFT_CS_PIN TOUCH_CS_PIN #define SPI_TFT_SCK_PIN TOUCH_SCK_PIN #define SPI_TFT_MISO_PIN TOUCH_MISO_PIN #define SPI_TFT_MOSI_PIN TOUCH_MOSI_PIN #define SPI_TFT_DC_PIN PB6 #define SPI_TFT_RST_PIN PF11 #define LCD_RESET_PIN PF11 #define LCD_BACKLIGHT_PIN PD13 #define FSMC_CS_PIN PD7 #define FSMC_RS_PIN PD11 #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 #define LCD_FULL_PIXEL_WIDTH 480 #define LCD_PIXEL_OFFSET_X 48 #define LCD_FULL_PIXEL_HEIGHT 320 #define LCD_PIXEL_OFFSET_Y 48 #define LCD_PIXEL_HEIGHT 320 #define LCD_PIXEL_WIDTH 480 #define XPT2046_X_CALIBRATION -12316 #define XPT2046_Y_CALIBRATION 8981 #define XPT2046_X_OFFSET 340 #define XPT2046_Y_OFFSET -20 #define USE_XPT2046 1 #define XPT2046_XY_SWAP 0 #define XPT2046_X_INV 1 #define XPT2046_Y_INV 0 #define XPT2046_HOR_RES 480 #define XPT2046_VER_RES 320 #define XPT2046_X_MIN 140 #define XPT2046_Y_MIN 200 #define XPT2046_X_MAX 1900 #define XPT2046_Y_MAX 1900 #define XPT2046_AVG 4 #define XPT2046_INV 0 #endif // SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available // We nee to use the SPI2 #define ENABLE_SPI2 #define SCK_PIN PB13 #define MISO_PIN PB14 #define MOSI_PIN PB15 #define SS_PIN PB12 // // SD Card // #define SDIO_SUPPORT #define SD_DETECT_PIN -1 // PF0, but it isn't connected #define SDIO_CLOCK 4500000 #define SDIO_READ_RETRIES 16