/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #include "../../inc/MarlinConfig.h" #define DEBUG_DXC_MODE #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) #include "../gcode.h" #include "../../module/motion.h" #include "../../module/stepper.h" #include "../../module/tool_change.h" #include "../../module/planner.h" #if ENABLED(DUAL_X_CARRIAGE) /** * M605: Set dual x-carriage movement mode * * M605 : Restore user specified DEFAULT_DUAL_X_CARRIAGE_MODE * M605 S0: Full control mode. The slicer has full control over x-carriage movement * M605 S1: Auto-park mode. The inactive head will auto park/unpark without slicer involvement * M605 S2 [Xnnn] [Rmmm]: Duplication mode. The second extruder will duplicate the first with nnn * units x-offset and an optional differential hotend temperature of * mmm degrees. E.g., with "M605 S2 X100 R2" the second extruder will duplicate * the first with a spacing of 100mm in the x direction and 2 degrees hotter. * M605 S3 : Enable Scaled Duplication mode. The second extruder will duplicate the first extruder's * movement similar to the M605 S2 mode. However, the second extruder will be producing * a scaled image of the first extruder. The initial x-offset and temperature differential are * set with M605 S2 [Xnnn] [Rmmm] and then followed with a M605 S3 to start the mirrored movement. * M605 W : IDEX What? command. * * Note: the X axis should be homed after changing dual x-carriage mode. */ void GcodeSuite::M605() { planner.synchronize(); if (parser.seen('S')) { const DualXMode previous_mode = dual_x_carriage_mode; dual_x_carriage_mode = (DualXMode)parser.value_byte(); scaled_duplication_mode = false; if (dual_x_carriage_mode == DXC_SCALED_DUPLICATION_MODE) { if (previous_mode != DXC_DUPLICATION_MODE) { SERIAL_ECHOPGM("Printer must be in DXC_DUPLICATION_MODE prior to \n"); SERIAL_ECHOPGM("specifying DXC_SCALED_DUPLICATION_MODE.\n"); dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; return; } scaled_duplication_mode = true; stepper.set_directions(); float x_jog = current_position[X_AXIS] - .1; for (uint8_t i = 2; --i;) { planner.buffer_line(x_jog, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, 0); x_jog += .1; } return; } switch (dual_x_carriage_mode) { case DXC_FULL_CONTROL_MODE: case DXC_AUTO_PARK_MODE: break; case DXC_DUPLICATION_MODE: if (parser.seen('X')) duplicate_extruder_x_offset = MAX(parser.value_linear_units(), X2_MIN_POS - x_home_pos(0)); if (parser.seen('R')) duplicate_extruder_temp_offset = parser.value_celsius_diff(); if (active_extruder != 0) tool_change(0); break; default: dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; break; } active_extruder_parked = false; extruder_duplication_enabled = false; stepper.set_directions(); delayed_move_time = 0; } else if (!parser.seen('W')) // if no S or W parameter, the DXC mode gets reset to the user's default dual_x_carriage_mode = DEFAULT_DUAL_X_CARRIAGE_MODE; if (parser.seen('W')) { SERIAL_ECHO_START(); SERIAL_ECHOPGM("IDEX mode: "); switch (dual_x_carriage_mode) { case DXC_FULL_CONTROL_MODE: SERIAL_ECHOPGM("DXC_FULL_CONTROL_MODE"); break; case DXC_AUTO_PARK_MODE: SERIAL_ECHOPGM("DXC_AUTO_PARK_MODE"); break; case DXC_DUPLICATION_MODE: SERIAL_ECHOPGM("DXC_DUPLICATION_MODE"); break; case DXC_SCALED_DUPLICATION_MODE: SERIAL_ECHOPGM("DXC_SCALED_DUPLICATION_MODE"); break; } SERIAL_ECHOPAIR("\nActive Ext: ", int(active_extruder)); if (!active_extruder_parked) SERIAL_ECHOPGM(" NOT "); SERIAL_ECHOPGM(" parked."); SERIAL_ECHOPAIR("\nactive_extruder_x_pos: ", current_position[X_AXIS]); SERIAL_ECHOPAIR("\ninactive_extruder_x_pos: ", inactive_extruder_x_pos); SERIAL_ECHOPAIR("\nextruder_duplication_enabled: ", int(extruder_duplication_enabled)); SERIAL_ECHOPAIR("\nduplicate_extruder_x_offset: ", duplicate_extruder_x_offset); SERIAL_ECHOPAIR("\nduplicate_extruder_temp_offset: ", duplicate_extruder_temp_offset); SERIAL_ECHOPAIR("\ndelayed_move_time: ", delayed_move_time); SERIAL_ECHOPAIR("\nX1 Home X: ", x_home_pos(0)); SERIAL_ECHOPAIR("\nX1_MIN_POS=", int(X1_MIN_POS)); SERIAL_ECHOPAIR("\nX1_MAX_POS=", int(X1_MAX_POS)); SERIAL_ECHOPAIR("\nX2 Home X: ", x_home_pos(1)); SERIAL_ECHOPAIR("\nX2_MIN_POS=", int(X2_MIN_POS)); SERIAL_ECHOPAIR("\nX2_MAX_POS=", int(X2_MAX_POS)); SERIAL_ECHOPAIR("\nX2_HOME_DIR=", int(X2_HOME_DIR)); SERIAL_ECHOPAIR("\nX2_HOME_POS=", int(X2_HOME_POS)); SERIAL_ECHOPAIR("\nDEFAULT_DUAL_X_CARRIAGE_MODE=", STRINGIFY(DEFAULT_DUAL_X_CARRIAGE_MODE)); SERIAL_ECHOPAIR("\nTOOLCHANGE_PARK_ZLIFT=", float(TOOLCHANGE_PARK_ZLIFT)); SERIAL_ECHOPAIR("\nTOOLCHANGE_UNPARK_ZLIFT=", float(TOOLCHANGE_UNPARK_ZLIFT)); SERIAL_ECHOPAIR("\nDEFAULT_DUPLICATION_X_OFFSET=", int(DEFAULT_DUPLICATION_X_OFFSET)); SERIAL_EOL(); for (uint8_t i = 0; i < 2; i++) { SERIAL_ECHOPAIR(" nozzle:", int(i)); LOOP_XYZ(j) { SERIAL_ECHOPGM(" hotend_offset["); SERIAL_CHAR(axis_codes[j]); SERIAL_ECHOPAIR("_AXIS][", int(i)); SERIAL_ECHOPAIR("]=", hotend_offset[j][i]); } SERIAL_EOL(); } SERIAL_EOL(); } } #elif ENABLED(DUAL_NOZZLE_DUPLICATION_MODE) void GcodeSuite::M605() { planner.synchronize(); extruder_duplication_enabled = parser.intval('S') == (int)DXC_DUPLICATION_MODE; SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF); } #endif // DUAL_NOZZLE_DUPLICATION_MODE #endif // DUAL_X_CARRIAGE || DUAL_NOZZLE_DUPLICATION_MODE