/** * Marlin 3D Printer Firmware * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once #if PIO_PLATFORM_VERSION < 1001 #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically." #endif #if PIO_FRAMEWORK_VERSION < 2002 #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries." #endif /** * Detect an old pins file by checking for old ADC pins values. */ #define _OLD_TEMP_PIN(P) PIN_EXISTS(P) && _CAT(P,_PIN) <= 7 && _CAT(P,_PIN) != 2 && _CAT(P,_PIN) != 3 #if _OLD_TEMP_PIN(TEMP_BED) #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_0) #error "TEMP_0_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_1) #error "TEMP_1_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_2) #error "TEMP_2_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_3) #error "TEMP_3_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_4) #error "TEMP_4_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_5) #error "TEMP_5_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_6) #error "TEMP_6_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #elif _OLD_TEMP_PIN(TEMP_7) #error "TEMP_7_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)." #endif #undef _OLD_TEMP_PIN /** * Because PWM hardware channels all share the same frequency, along with the * fallback software channels, FAST_PWM_FAN is incompatible with Servos. */ #if NUM_SERVOS > 0 && ENABLED(FAST_PWM_FAN) #error "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards." #endif /** * Test LPC176x-specific configuration values for errors at compile-time. */ //#if ENABLED(SPINDLE_LASER_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11) // #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector" //#endif #if IS_RE_ARM_BOARD && ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI) #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 require TMC_USE_SW_SPI" #endif #if ENABLED(BAUD_RATE_GCODE) #error "BAUD_RATE_GCODE is not yet supported on LPC176x." #endif /** * Flag any serial port conflicts * * Port | TX | RX | * --- | --- | --- | * Serial | P0_02 | P0_03 | * Serial1 | P0_15 | P0_16 | * Serial2 | P0_10 | P0_11 | * Serial3 | P0_00 | P0_01 | */ #if (defined(SERIAL_PORT) && SERIAL_PORT == 0) || (defined(SERIAL_PORT_2) && SERIAL_PORT_2 == 0) || (defined(DGUS_SERIAL_PORT) && DGUS_SERIAL_PORT == 0) #if X_CS_PIN == P0_02 || TMC_SW_MISO == P0_02 || (E_STEPPERS && E_MUX1_PIN == P0_02) \ || Y_CS_PIN == P0_03 || TMC_SW_MOSI == P0_03 || (E_STEPPERS && E_MUX0_PIN == P0_03) #error "Serial port assignment (0) conflicts with other pins!" #endif #endif #if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1 || DGUS_SERIAL_PORT == 1 #if TMC_SW_SCK == P0_15 #error "Serial port assignment (1) conflicts with other pins!" #elif HAS_SPI_LCD #if BTN_EN2 == P0_15 || SCK_PIN == P0_15 || LCD_PINS_D4 == P0_15 || DOGLCD_SCK == P0_15 || LCD_RESET_PIN == P0_15 || LCD_PINS_RS == P0_15 || SHIFT_CLK == P0_15 \ || BTN_EN1 == P0_16 || LCD_SDSS == P0_16 || LCD_PINS_RS == P0_16 || MISO_PIN == P0_16 || DOGLCD_A0 == P0_16 || SS_PIN == P0_16 || LCD_SDSS == P0_16 || DOGLCD_CS == P0_16 || LCD_RESET_PIN == P0_16 || LCD_BACKLIGHT_PIN == P0_16 #error "Serial port assignment (1) conflicts with other pins!" #endif #endif #endif #if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2 || DGUS_SERIAL_PORT == 2 #if Y_MIN_PIN == P0_10 || Z_MIN_PROBE_PIN == P0_10 \ || X_ENABLE_PIN == P0_10 || Y_ENABLE_PIN == P0_10 || X2_ENABLE_PIN == P0_10 || Y2_ENABLE_PIN == P0_10 || Z2_ENABLE_PIN == P0_10 || Z3_ENABLE_PIN == P0_10 || Z4_ENABLE_PIN == P0_10 \ || X2_CS_PIN == P0_10 || Y2_CS_PIN == P0_10 || Z2_CS_PIN == P0_10 || Z3_CS_PIN == P0_10 || Z4_CS_PIN == P0_10 \ || X_DIR_PIN == P0_11 || Y_DIR_PIN == P0_11 || X2_DIR_PIN == P0_11 || Y2_DIR_PIN == P0_11 || Z2_DIR_PIN == P0_11 || Z3_DIR_PIN == P0_11 || Z4_DIR_PIN == P0_11 \ || X2_STEP_PIN == P0_11 || Y2_STEP_PIN == P0_11 || Z2_STEP_PIN == P0_11 || Z3_STEP_PIN == P0_11 || Z4_STEP_PIN == P0_11 #error "Serial port assignment (2) conflicts with other pins!" #elif (E_STEPPERS > 1 && (E1_ENABLE_PIN == P0_10 || E1_CS_PIN == P0_10)) || (E_STEPPERS > 0 && (E0_DIR_PIN == P0_11 || E0_STEP_PIN == P0_11)) #error "Serial port assignment (2) conflicts with other pins!" #endif #endif #if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3 || DGUS_SERIAL_PORT == 3 #if X_MIN_PIN == P0_00 || Y_SERIAL_TX_PIN == P0_00 || Y_SERIAL_RX_PIN == P0_00 \ || X_MAX_PIN == P0_01 || X_SERIAL_TX_PIN == P0_01 || X_SERIAL_RX_PIN == P0_01 #error "Serial port assignment (2) conflicts with other pins!" #elif E_STEPPERS > 1 && (E1_DIR_PIN == P0_00 || E1_STEP_PIN == P0_01) #error "Serial port assignment (2) conflicts with other pins!" #endif #endif