/**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
#pragma once

/**
 * HJC2560-C Rev2.x pin assignments
 */

#ifndef __AVR_ATmega2560__
  #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif

#define DEFAULT_MACHINE_NAME "ADIMLab Granty V2"
#define BOARD_INFO_NAME      "HJC2560-C"

//
// Servos
//
//#ifndef SERVO0_PIN
//  #define SERVO0_PIN       11
//#endif

//
// Limit Switches
//
#define X_STOP_PIN         22
#define Y_STOP_PIN         26
#define Z_STOP_PIN         29
//#define EXP_STOP_PIN       28

//
// Steppers
//
#define X_STEP_PIN         25
#define X_DIR_PIN          23
#define X_ENABLE_PIN       27

#define Y_STEP_PIN         32
#define Y_DIR_PIN          33
#define Y_ENABLE_PIN       31

#define Z_STEP_PIN         35
#define Z_DIR_PIN          36
#define Z_ENABLE_PIN       34

#define E0_STEP_PIN        42
#define E0_DIR_PIN         43
#define E0_ENABLE_PIN      37

#define E1_STEP_PIN        49
#define E1_DIR_PIN         47
#define E1_ENABLE_PIN      48

#define MOTOR_CURRENT_PWM_XY_PIN   44
#define MOTOR_CURRENT_PWM_Z_PIN    45
#define MOTOR_CURRENT_PWM_E_PIN    46
// Motor current PWM conversion, PWM value = MotorCurrentSetting * 255 / range
#ifndef MOTOR_CURRENT_PWM_RANGE
  #define MOTOR_CURRENT_PWM_RANGE  2000
#endif
#define DEFAULT_PWM_MOTOR_CURRENT  { 1300, 1300, 1250 }

//
// Temperature Sensors
//
#define TEMP_0_PIN          8   // Analog Input
#define TEMP_1_PIN          9   // Analog Input
#define TEMP_BED_PIN       10   // Analog Input

//
// Heaters / Fans
//
#define HEATER_0_PIN        2
#define HEATER_1_PIN        3
#define HEATER_BED_PIN      4

#ifndef FAN_PIN
  #define FAN_PIN           7   //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释
#endif

//
// Misc. Functions
//
#define SDSS               53
#define SD_DETECT_PIN      39
//#define LED_PIN           8
#define CASE_LIGHT_PIN      8           // 8 默认挤出机风扇作为Case LED，如果需要PWM FAN,则需要将FAN_PIN置为7，LED_PIN置为8

//#define SAFETY_TRIGGERED_PIN     28   // PIN to detect the safety circuit has triggered
//#define MAIN_VOLTAGE_MEASURE_PIN 14   // ANALOG PIN to measure the main voltage, with a 100k - 4k7 resitor divider.

//
// M3/M4/M5 - Spindle/Laser Control
//
#if ENABLED(SPINDLE_LASER_ENABLE)
  #define SPINDLE_DIR_PIN           16
  #define SPINDLE_LASER_ENABLE_PIN  17   // Pin should have a pullup!
  #define SPINDLE_LASER_PWM_PIN      9   // Hardware PWM
#endif

//
// LCD / Controller
//
#if HAS_SPI_LCD

  #define BEEPER_PIN       18

  #if ENABLED(NEWPANEL)

    #define LCD_PINS_RS     20   // LCD_CS
    #define LCD_PINS_ENABLE 15   // LCD_SDA
    #define LCD_PINS_D4     14   // LCD_SCK

    #if ENABLED(HJC_LCD_SMART_CONTROLLER)
      #define LCD_BACKLIGHT_PIN  5   // LCD_Backlight
      //#ifndef LCD_CONTRAST_PIN
      //  #define LCD_CONTRAST_PIN  5   // LCD_Contrast
      //#endif
      #ifndef FIL_RUNOUT_PIN
        #define FIL_RUNOUT_PIN 24   // Filament runout
      #endif
    #else
      #define LCD_PINS_D5  21
      #define LCD_PINS_D6   5
      #define LCD_PINS_D7   6
    #endif

    #define BTN_EN1        41
    #define BTN_EN2        40
    #define BTN_ENC        19

    #define SD_DETECT_PIN  39

  #else

    // Buttons attached to a shift register
    #define SHIFT_CLK      38
    #define SHIFT_LD       42
    #define SHIFT_OUT      40
    #define SHIFT_EN       17

    #define LCD_PINS_RS    16
    #define LCD_PINS_ENABLE 5
    #define LCD_PINS_D4     6
    #define LCD_PINS_D5    21
    #define LCD_PINS_D6    20
    #define LCD_PINS_D7    19

  #endif // !NEWPANEL

#endif // HAS_SPI_LCD