/** * Marlin 3D Printer Firmware * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * */ #pragma once /** * Aragonese * * LCD Menu Messages * See also http://marlinfw.org/docs/development/lcd_language.html * */ #define DISPLAY_CHARSET_ISO10646_1 #define NOT_EXTENDED_ISO10646_1_5X7 #define WELCOME_MSG MACHINE_NAME _UxGT(" parada.") #define MSG_SD_INSERTED _UxGT("Tarcheta mesa") #define MSG_SD_REMOVED _UxGT("Tarcheta sacada") #define MSG_LCD_ENDSTOPS _UxGT("Endstops") // Max length 8 characters #define MSG_MAIN _UxGT("Menu prencipal") #define MSG_AUTOSTART _UxGT("Inicio automatico") #define MSG_DISABLE_STEPPERS _UxGT("Amortar motors") #define MSG_AUTO_HOME _UxGT("Levar a l'orichen") #define MSG_AUTO_HOME_X _UxGT("Orichen X") #define MSG_AUTO_HOME_Y _UxGT("Orichen Y") #define MSG_AUTO_HOME_Z _UxGT("Orichen Z") #define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Orichen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Encetar (pretar)") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Vinient punto") #define MSG_LEVEL_BED_DONE _UxGT("Nivelacion feita!") #define MSG_SET_HOME_OFFSETS _UxGT("Achustar desfases") #define MSG_HOME_OFFSETS_APPLIED _UxGT("Desfase aplicau") #define MSG_SET_ORIGIN _UxGT("Establir orichen") #define MSG_PREHEAT_1 _UxGT("Precalentar " PREHEAT_1_LABEL) #define MSG_PREHEAT_1_N MSG_PREHEAT_1 _UxGT(" ") #define MSG_PREHEAT_1_ALL MSG_PREHEAT_1 _UxGT(" Tot") #define MSG_PREHEAT_1_BEDONLY MSG_PREHEAT_1 _UxGT(" Base") #define MSG_PREHEAT_1_SETTINGS MSG_PREHEAT_1 _UxGT(" Conf") #define MSG_PREHEAT_2 _UxGT("Precalentar " PREHEAT_2_LABEL) #define MSG_PREHEAT_2_N MSG_PREHEAT_2 _UxGT(" ") #define MSG_PREHEAT_2_ALL MSG_PREHEAT_2 _UxGT(" Tot") #define MSG_PREHEAT_2_BEDONLY MSG_PREHEAT_2 _UxGT(" Base") #define MSG_PREHEAT_2_SETTINGS MSG_PREHEAT_2 _UxGT(" Conf") #define MSG_COOLDOWN _UxGT("Enfriar") #define MSG_SWITCH_PS_ON _UxGT("Enchegar Fuent") #define MSG_SWITCH_PS_OFF _UxGT("Amortar Fuent") #define MSG_EXTRUDE _UxGT("Extruir") #define MSG_RETRACT _UxGT("Retraer") #define MSG_MOVE_AXIS _UxGT("Mover Eixes") #define MSG_BED_LEVELING _UxGT("Nivelar base") #define MSG_LEVEL_BED _UxGT("Nivelar base") #define MSG_MOVE_X _UxGT("Mover X") #define MSG_MOVE_Y _UxGT("Mover Y") #define MSG_MOVE_Z _UxGT("Mover Z") #define MSG_MOVE_E _UxGT("Extrusor") #define MSG_MOVE_01MM _UxGT("Mover 0.1mm") #define MSG_MOVE_1MM _UxGT("Mover 1mm") #define MSG_MOVE_10MM _UxGT("Mover 10mm") #define MSG_SPEED _UxGT("Velocidat") #define MSG_BED_Z _UxGT("Base Z") #define MSG_NOZZLE _UxGT("Boquilla") #define MSG_BED _UxGT("Base") #define MSG_FAN_SPEED _UxGT("Ixoriador") #define MSG_FLOW _UxGT("Fluxo") #define MSG_CONTROL _UxGT("Control") #define MSG_MIN _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Min") #define MSG_MAX _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Max") #define MSG_FACTOR _UxGT(" ") LCD_STR_THERMOMETER _UxGT(" Fact") #define MSG_AUTOTEMP _UxGT("Temperatura Auto.") #define MSG_LCD_ON _UxGT("On") #define MSG_LCD_OFF _UxGT("Off") #define MSG_PID_P _UxGT("PID-P") #define MSG_PID_I _UxGT("PID-I") #define MSG_PID_D _UxGT("PID-D") #define MSG_PID_C _UxGT("PID-C") #define MSG_SELECT _UxGT("Trigar") #define MSG_ACC _UxGT("Aceleracion") #define MSG_JERK _UxGT("Jerk") #if IS_KINEMATIC #define MSG_VA_JERK _UxGT("Va-jerk") #define MSG_VB_JERK _UxGT("Vb-jerk") #define MSG_VC_JERK _UxGT("Vc-jerk") #else #define MSG_VA_JERK _UxGT("Vx-jerk") #define MSG_VB_JERK _UxGT("Vy-jerk") #define MSG_VC_JERK _UxGT("Vz-jerk") #endif #define MSG_VE_JERK _UxGT("Ve-jerk") #define MSG_VMAX _UxGT("Vmax") #define MSG_VMIN _UxGT("Vmin") #define MSG_VTRAV_MIN _UxGT("Vel. viache min") #define MSG_ACCELERATION MSG_ACC #define MSG_AMAX _UxGT("Acel. max") #define MSG_A_RETRACT _UxGT("Acel. retrac.") #define MSG_A_TRAVEL _UxGT("Acel. Viaje") #define MSG_STEPS_PER_MM _UxGT("Trangos/mm") #if IS_KINEMATIC #define MSG_ASTEPS _UxGT("A trangos/mm") #define MSG_BSTEPS _UxGT("B trangos/mm") #define MSG_CSTEPS _UxGT("C trangos/mm") #else #define MSG_ASTEPS _UxGT("X trangos/mm") #define MSG_BSTEPS _UxGT("Y trangos/mm") #define MSG_CSTEPS _UxGT("Z trangos/mm") #endif #define MSG_ESTEPS _UxGT("E trangos/mm") #define MSG_E1STEPS _UxGT("E1 trangos/mm") #define MSG_E2STEPS _UxGT("E2 trangos/mm") #define MSG_E3STEPS _UxGT("E3 trangos/mm") #define MSG_E4STEPS _UxGT("E4 trangos/mm") #define MSG_E5STEPS _UxGT("E5 trangos/mm") #define MSG_E6STEPS _UxGT("E6 trangos/mm") #define MSG_TEMPERATURE _UxGT("Temperatura") #define MSG_MOTION _UxGT("Movimiento") #define MSG_FILAMENT _UxGT("Filamento") #define MSG_VOLUMETRIC_ENABLED _UxGT("E in mm3") #define MSG_FILAMENT_DIAM _UxGT("Fil. Dia.") #define MSG_CONTRAST _UxGT("Contraste") #define MSG_STORE_EEPROM _UxGT("Alzar memoria") #define MSG_LOAD_EEPROM _UxGT("Cargar memoria") #define MSG_RESTORE_FAILSAFE _UxGT("Restaurar memoria") #define MSG_REFRESH _UxGT("Tornar a cargar") #define MSG_WATCH _UxGT("Informacion") #define MSG_PREPARE _UxGT("Preparar") #define MSG_TUNE _UxGT("Achustar") #define MSG_PAUSE_PRINT _UxGT("Pausar impresion") #define MSG_RESUME_PRINT _UxGT("Contin. impresion") #define MSG_STOP_PRINT _UxGT("Detener Impresion") #define MSG_CARD_MENU _UxGT("Menu de SD") #define MSG_NO_CARD _UxGT("No i hai tarcheta") #define MSG_DWELL _UxGT("Reposo...") #define MSG_USERWAIT _UxGT("Aguardand ordines") #define MSG_PRINT_ABORTED _UxGT("Impres. cancelada") #define MSG_NO_MOVE _UxGT("Sin movimiento") #define MSG_KILLED _UxGT("Aturada d'emerch.") #define MSG_STOPPED _UxGT("Aturada.") #define MSG_CONTROL_RETRACT _UxGT("Retraer mm") #define MSG_CONTROL_RETRACT_SWAP _UxGT("Swap Retraer mm") #define MSG_CONTROL_RETRACTF _UxGT("Retraer F") #define MSG_CONTROL_RETRACT_ZHOP _UxGT("Devantar mm") #define MSG_CONTROL_RETRACT_RECOVER _UxGT("DesRet mm") #define MSG_CONTROL_RETRACT_RECOVER_SWAP _UxGT("Swap DesRet mm") #define MSG_CONTROL_RETRACT_RECOVERF _UxGT("DesRet F") #define MSG_AUTORETRACT _UxGT("Retraccion auto.") #define MSG_FILAMENTCHANGE _UxGT("Cambear filamento") #define MSG_INIT_SDCARD _UxGT("Encetan. tarcheta") #define MSG_CHANGE_SDCARD _UxGT("Cambiar tarcheta") #define MSG_ZPROBE_OUT _UxGT("Sonda Z fuera") #define MSG_BLTOUCH_SELFTEST _UxGT("BLTouch Auto-Test") #define MSG_BLTOUCH_RESET _UxGT("Reset BLTouch") #define MSG_HOME _UxGT("Home") // Used as MSG_HOME " " MSG_X MSG_Y MSG_Z " " MSG_FIRST #define MSG_FIRST _UxGT("first") #define MSG_ZPROBE_ZOFFSET _UxGT("Desfase Z") #define MSG_BABYSTEP_X _UxGT("Micropaso X") #define MSG_BABYSTEP_Y _UxGT("Micropaso Y") #define MSG_BABYSTEP_Z _UxGT("Micropaso Z") #define MSG_ENDSTOP_ABORT _UxGT("Cancelado - Endstop") #define MSG_HEATING_FAILED_LCD _UxGT("Error: en calentar") #define MSG_ERR_REDUNDANT_TEMP _UxGT("Error: temperatura") #define MSG_THERMAL_RUNAWAY _UxGT("Error de temperatura") #define MSG_ERR_MAXTEMP _UxGT("Error: Temp Maxima") #define MSG_ERR_MINTEMP _UxGT("Error: Temp Menima") #define MSG_ERR_MAXTEMP_BED _UxGT("Error: Temp Max base") #define MSG_ERR_MINTEMP_BED _UxGT("Error: Temp Min base") #define MSG_ERR_Z_HOMING MSG_HOME _UxGT(" ") MSG_X MSG_Y _UxGT(" ") MSG_FIRST #define MSG_HALTED _UxGT("IMPRESORA ATURADA") #define MSG_PLEASE_RESET _UxGT("Per favor reinic.") #define MSG_SHORT_DAY _UxGT("d") #define MSG_SHORT_HOUR _UxGT("h") #define MSG_SHORT_MINUTE _UxGT("m") #define MSG_HEATING _UxGT("Calentando...") #define MSG_BED_HEATING _UxGT("Calentando base...") #define MSG_DELTA_CALIBRATE _UxGT("Calibracion Delta") #define MSG_DELTA_CALIBRATE_X _UxGT("Calibrar X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Calibrar Y") #define MSG_DELTA_CALIBRATE_Z _UxGT("Calibrar Z") #define MSG_DELTA_CALIBRATE_CENTER _UxGT("Calibrar Centro") #define MSG_INFO_MENU _UxGT("Inf. Impresora") #define MSG_INFO_PRINTER_MENU _UxGT("Inf. Impresora") #define MSG_INFO_STATS_MENU _UxGT("Estadisticas Imp.") #define MSG_INFO_BOARD_MENU _UxGT("Inf. Controlador") #define MSG_INFO_THERMISTOR_MENU _UxGT("Termistors") #define MSG_INFO_EXTRUDERS _UxGT("Extrusors") #define MSG_INFO_BAUDRATE _UxGT("Baudios") #define MSG_INFO_PROTOCOL _UxGT("Protocolo") #define MSG_CASE_LIGHT _UxGT("Luz") #if LCD_WIDTH >= 20 #define MSG_INFO_PRINT_COUNT _UxGT("Conteo de impresion") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") #define MSG_INFO_PRINT_TIME _UxGT("Tiempo total d'imp.") #define MSG_INFO_PRINT_LONGEST _UxGT("Impresion mas larga") #define MSG_INFO_PRINT_FILAMENT _UxGT("Total d'extrusion") #else #define MSG_INFO_PRINT_COUNT _UxGT("Impresions") #define MSG_INFO_COMPLETED_PRINTS _UxGT("Completadas") #define MSG_INFO_PRINT_TIME _UxGT("Total") #define MSG_INFO_PRINT_LONGEST _UxGT("Mas larga") #define MSG_INFO_PRINT_FILAMENT _UxGT("Extrusion") #endif #define MSG_INFO_MIN_TEMP _UxGT("Temperatura menima") #define MSG_INFO_MAX_TEMP _UxGT("Temperatura maxima") #define MSG_INFO_PSU _UxGT("Fuente de aliment") #define MSG_DRIVE_STRENGTH _UxGT("Fuerza d'o driver") #define MSG_DAC_PERCENT _UxGT("Driver %") #define MSG_DAC_EEPROM_WRITE _UxGT("Escri. DAC EEPROM") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Resumir imp.") // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display // #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Aguardand iniciar") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Meta o filamento") #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("y prete lo boton") #if LCD_HEIGHT >= 4 // Up to 3 lines allowed #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("d'o filamento") #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("cambear") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pa continar...") #else // LCD_HEIGHT < 4 // Up to 2 lines allowed #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("d'o fil. cambear") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Meta o filamento") #endif // LCD_HEIGHT < 4 #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Aguardando a") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("expulsar filament") #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Aguardando a") #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("cargar filamento") #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Aguardando impre.") #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("pa continar")