/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see .
*
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfigPre.h"
#if NEEDS_HARDWARE_PWM
#include
#include "HAL.h"
#include "timers.h"
void set_pwm_frequency(const pin_t pin, int f_desired) {
if (!PWM_PIN(pin)) return; // Don't proceed if no hardware timer
timer_dev *timer = PIN_MAP[pin].timer_device;
uint8_t channel = PIN_MAP[pin].timer_channel;
// Protect used timers
if (timer == get_timer_dev(TEMP_TIMER_NUM)) return;
if (timer == get_timer_dev(STEP_TIMER_NUM)) return;
#if PULSE_TIMER_NUM != STEP_TIMER_NUM
if (timer == get_timer_dev(PULSE_TIMER_NUM)) return;
#endif
if (!(timer->regs.bas->SR & TIMER_CR1_CEN)) // Ensure the timer is enabled
timer_init(timer);
timer_set_mode(timer, channel, TIMER_PWM);
uint16_t preload = 255; // Lock 255 PWM resolution for high frequencies
int32_t prescaler = (HAL_TIMER_RATE) / (preload + 1) / f_desired - 1;
if (prescaler > 65535) { // For low frequencies increase prescaler
prescaler = 65535;
preload = (HAL_TIMER_RATE) / (prescaler + 1) / f_desired - 1;
}
if (prescaler < 0) return; // Too high frequency
timer_set_reload(timer, preload);
timer_set_prescaler(timer, prescaler);
}
void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
timer_dev *timer = PIN_MAP[pin].timer_device;
uint16_t max_val = timer->regs.bas->ARR * v / v_size;
if (invert) max_val = v_size - max_val;
pwmWrite(pin, max_val);
}
#endif // NEEDS_HARDWARE_PWM
#endif // __STM32F1__