/**
 * Marlin 3D Printer Firmware
 *
 * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 * Copyright (c) 2019 BigTreeTech [https://github.com/bigtreetech]
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
#include "../../inc/MarlinConfigPre.h"

#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && HAS_SD_HOST_DRIVE

#include "msc_sd.h"
#include "../shared/Marduino.h"
#include "usbd_core.h"
#include <USB.h>
#include <USBMscHandler.h>

#define BLOCK_SIZE 512
#define PRODUCT_ID 0x29

#include "../../sd/cardreader.h"

class Sd2CardUSBMscHandler : public USBMscHandler {
public:
  bool GetCapacity(uint32_t *pBlockNum, uint16_t *pBlockSize) {
    *pBlockNum = card.getSd2Card().cardSize();
    *pBlockSize = BLOCK_SIZE;
    return true;
  }

  bool Write(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
    auto sd2card = card.getSd2Card();
    // single block
    if (blkLen == 1) {
      watchdog_refresh();
      sd2card.writeBlock(blkAddr, pBuf);
      return true;
    }

    // multi block optmization
    sd2card.writeStart(blkAddr, blkLen);
    while (blkLen--) {
      watchdog_refresh();
      sd2card.writeData(pBuf);
      pBuf += BLOCK_SIZE;
    }
    sd2card.writeStop();
    return true;
  }

  bool Read(uint8_t *pBuf, uint32_t blkAddr, uint16_t blkLen) {
    auto sd2card = card.getSd2Card();
    // single block
    if (blkLen == 1) {
      watchdog_refresh();
      sd2card.readBlock(blkAddr, pBuf);
      return true;
    }

    // multi block optmization
    sd2card.readStart(blkAddr);
    while (blkLen--) {
      watchdog_refresh();
      sd2card.readData(pBuf);
      pBuf += BLOCK_SIZE;
    }
    sd2card.readStop();
    return true;
  }

  bool IsReady() {
    return card.isMounted();
  }
};

Sd2CardUSBMscHandler usbMscHandler;

/* USB Mass storage Standard Inquiry Data */
uint8_t  Marlin_STORAGE_Inquirydata[] = { /* 36 */
  /* LUN 0 */
  0x00,
  0x80,
  0x02,
  0x02,
  (STANDARD_INQUIRY_DATA_LEN - 5),
  0x00,
  0x00,
  0x00,
  'M', 'A', 'R', 'L', 'I', 'N', ' ', ' ', /* Manufacturer : 8 bytes */
  'P', 'r', 'o', 'd', 'u', 'c', 't', ' ', /* Product      : 16 Bytes */
  ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ',
  '0', '.', '0', '1',                     /* Version      : 4 Bytes */
};

USBMscHandler *pSingleMscHandler = &usbMscHandler;

void MSC_SD_init() {
  USBDevice.end();
  delay(200);
  USBDevice.begin();
  USBDevice.registerMscHandlers(1, &pSingleMscHandler, Marlin_STORAGE_Inquirydata);
}

#endif // __STM32F1__ && HAS_SD_HOST_DRIVE